gt400 can not connect what to do? - GSM-Forum

MUTUAL · 07-05-2011, 01:19

hi team i have lg gt400 trying to connect with volume up button and inster cable but its not working octopus box saying this

Code:

Welcome to Octopus box software version 1.8.1
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM83
Selected baudrate: 921600
Selected model: GT400
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and 
connect USB cable.
If phone not connected, connect (solder) jumper according to picture 
("Show testpoint" button).
Starting...Canceled!
Disconnected.

cabu i can not see picture in the menu there no test point pic?

Octopus box · 07-05-2011, 06:44

Hello.
You need to install A2 platform driver (http://octopusbox.com/files/drivers/...p-2.2.0.10.exe), then reconnect battery, press and hold volume-up button and connect USB cable.
Please note: for correct working the battery must be fully charged!

MUTUAL · 07-05-2011, 08:04

Quote:

Originally Posted by octopus box

hello.
You need to install a2 platform driver (http://octopusbox.com/files/drivers/...p-2.2.0.10.exe), then reconnect battery, press and hold volume-up button and connect usb cable.
Please note: For correct working the battery must be fully charged!

i already install that driver battery also fully charged they problem stil i can not connect in software it saying about test point can show that test point?

Octopus box · 07-05-2011, 09:00

Please fully charge phones' battery (voltage level should be not lower than 4.1 V). This is very important! If phone's battery is not fully charged, phone can not connect and errors may occur during other operations!

MUTUAL · 07-05-2011, 23:56

Quote:

Originally Posted by Octopus box

Please fully charge phones' battery (voltage level should be not lower than 4.1 V). This is very important! If phone's battery is not fully charged, phone can not connect and errors may occur during other operations!

thanks u right after fully charge battery phone can connect now thanks for help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	Today 19:20
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	04-10-2013 02:07
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	28	08-30-2012 03:40
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	12-18-2011 11:00
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	11-17-2011 17:08

07-05-2011, 06:44	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Posts: 10,718 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks: 3,596 Thanked 4,880 Times in 2,557 Posts	Hello. You need to install A2 platform driver (http://octopusbox.com/files/drivers/...p-2.2.0.10.exe), then reconnect battery, press and hold volume-up button and connect USB cable. Please note: for correct working the battery must be fully charged!

07-05-2011, 09:00	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Posts: 10,718 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks: 3,596 Thanked 4,880 Times in 2,557 Posts	Please fully charge phones' battery (voltage level should be not lower than 4.1 V). This is very important! If phone's battery is not fully charged, phone can not connect and errors may occur during other operations!