LG E900 flash - GSM-Forum

dlasz · 11-23-2011, 12:43

Hi

Code:

--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM44
Selected model: E900
Mode: Normal
Phone model: LG-E900
SW Version: LG-E900_V10a_Final2-OCT-15-2010-2250-7004
IMEI: 354042-04-******-8
Bluetooth address: 5C:17:D3:34:F8:42
Firmware compiled date: Sep 23 2010
Firmware compiled time: 22:00:00
Firmware released date: Oct 15 2010
Firmware released time: 10:17:08
--------------------------------------------------------------------------------
To perform this operation you need:
1. Disconnect cable and reconnect the battery
2. Press and hold "Camera" + "Vol-" + "Power ON" keys
3. Connect cable and repeat the operation
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM44
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-HUN-XXX-NOV-09-2010+0.oct"...
Invalid file!

What is the problem?

thx

Octopus box · 11-23-2011, 14:42

Hello.
We have tested this firmware, it is valid. Maybe, You have unpacked it incorrectly. Please re-download and unpack it again.

dlasz · 11-23-2011, 15:53

I re-download. Its OK.

Write firmware done!

But dont power on.

Reconnect to box. Read phone info.
Mode: Emergency

pls help

Octopus box · 11-23-2011, 17:04

Please post here software log.

dlasz · 11-24-2011, 08:39

Platform: LG Qualcomm
2011.11.23. 15:12:14 > Selected port: COM44
2011.11.23. 15:12:14 > Selected model: E900
2011.11.23. 15:12:14 > Phone model: E900
2011.11.23. 15:12:14 > Mode: Emergency
2011.11.23. 15:12:15 > Opening "E900AT-00-V10b-HUN-XXX-NOV-09-2010+0.oct"...2011.11.23. 15:12:15 > OK
2011.11.23. 15:12:15 > Writing Firmware...
2011.11.23. 15:12:15 > --------------------------------------------------------------------------------
2011.11.23. 15:12:15 > Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing!

Please, follow these simple precautions to avoid damaging your phone.
2011.11.23. 15:12:15 > --------------------------------------------------------------------------------
2011.11.23. 15:12:42 > Checking partition...2011.11.23. 15:12:42 > OK
2011.11.23. 15:12:42 > Writing APPS boot...2011.11.23. 15:12:44 > OK
2011.11.23. 15:12:44 > Writing APPS...2011.11.23. 15:12:44 > OK
2011.11.23. 15:12:45 > Writing DSP1...2011.11.23. 15:12:52 > OK
2011.11.23. 15:12:52 > Writing AMSS...2011.11.23. 15:13:03 > OK
2011.11.23. 15:13:03 > Writing Windows Mobile...2011.11.23. 15:36:54 > OK
2011.11.23. 15:36:54 > Writing Firmware done!
2011.11.23. 15:36:54 > To finish the operation please power on phone and wait 3 minutes
2011.11.23. 15:38:02 > --------------------------------------------------------------------------------
2011.11.23. 15:38:02 > Platform: LG Qualcomm
2011.11.23. 15:38:02 > Selected port: COM44
2011.11.23. 15:38:02 > Selected model: E900
2011.11.23. 15:38:02 > Phone model: E900
2011.11.23. 15:38:02 > Mode: Emergency

Octopus box · 11-24-2011, 10:00

What was the problem (state) with your phone before? Why You have written this firmware?

dlasz · 11-24-2011, 10:27

The old firmware was not hungarian language.

Octopus box · 11-24-2011, 11:15

Most likely, You need to write firmware with phone's boots. Octopus Box LG software currently not supports of writing phone's boots for this phone model because of security reasons. We will prepare test version with such possibility and contact You for test.

dlasz · 11-24-2011, 11:52

I re-flash the original LG flasher (LGDP2_V36_UMTS.exe) and working fine.

Pufi164 · 03-24-2012, 19:38

extract wit 7.zip and file OK.
(with winzip E900AT-00-V10b-HUN-XXX-NOV-09-2010+0.octfile bad)
Flash OK, phone live.
But no HUN language:-(

But now I hate them!
IPhone, Symbian, Android, Bada, and now this.
It is not missing:-(

Pufi164 · 03-24-2012, 21:01

Quote:

Originally Posted by dlasz

I re-flash the original LG flasher (LGDP2_V36_UMTS.exe) and working fine.

This OK.
Even the Hungarian language:-)

ghano · 11-20-2012, 20:40

Have same problme here phone hang in LG logo flash with Octopus phone wont power ON

Code:

Welcome to Octopus Box LG Software version 2.3.0
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "Please, select firmware file"...
File does not exists!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM261
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM9
Selected model: E900
Phone not detected. Please try again.
--------------------------------------------------------------------------------
To perform this operation you need:
1. Disconnect cable and power phone on
2. In call window input ##634# and click "call" button. After this in list of 
application will be avaliable "MFG" application
3. Execute MFG and input password 277634#*# - You will enter into 
Engineer menu
4. Go to Engineer menu -> Port settings -> USB switching and select "QC 
COMPOSITE"
5. After rebooting, connect cable, install drivers and repeat the operation
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM9
Selected model: E900
Phone not detected. Please try again.
--------------------------------------------------------------------------------
To perform this operation you need:
1. Disconnect cable and power phone on
2. In call window input ##634# and click "call" button. After this in list of 
application will be avaliable "MFG" application
3. Execute MFG and input password 277634#*# - You will enter into 
Engineer menu
4. Go to Engineer menu -> Port settings -> USB switching and select "QC 
COMPOSITE"
5. After rebooting, connect cable, install drivers and repeat the operation
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM9
Selected model: E900
Phone not detected. Please try again.
--------------------------------------------------------------------------------
To perform this operation you need:
1. Disconnect cable and power phone on
2. In call window input ##634# and click "call" button. After this in list of 
application will be avaliable "MFG" application
3. Execute MFG and input password 277634#*# - You will enter into 
Engineer menu
4. Go to Engineer menu -> Port settings -> USB switching and select "QC 
COMPOSITE"
5. After rebooting, connect cable, install drivers and repeat the operation
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM9
Selected model: E900
Phone not detected. Please try again.
--------------------------------------------------------------------------------
To perform this operation you need:
1. Disconnect cable and power phone on
2. In call window input ##634# and click "call" button. After this in list of 
application will be avaliable "MFG" application
3. Execute MFG and input password 277634#*# - You will enter into 
Engineer menu
4. Go to Engineer menu -> Port settings -> USB switching and select "QC 
COMPOSITE"
5. After rebooting, connect cable, install drivers and repeat the operation
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...
Invalid file!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Reseting...Failed!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: E900
Phone model: E900
Mode: Emergency
Opening "E900AT-00-V10b-208-XXX-NOV-09-2010+0.oct"...OK
Writing Firmware...
--------------------------------------------------------------------------------
     Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, 
modems, etc.) and close all other running programs. To avoid errors in 
the flashing process, use a clean PC (without any installed drivers for 
other Qualcomm-based devices). You should not run any other 
programs or attach new devices to your computer during the flashing!

     Please, follow these simple precautions to avoid damaging your 
phone.
--------------------------------------------------------------------------------
Checking partition...OK
Writing APPS boot...OK
Writing APPS...OK
Writing DSP1...OK
Writing AMSS...OK
Writing Windows Mobile...OK
Writing Firmware done!
To finish the operation please power on phone and wait 3 minutes

Octopus box · 11-21-2012, 07:12

Hello.
1. Try to write different firmwares from the support area.
2. Try to write another firmware using original LG flasher and firmware. You can ask users about original LG flasher and firmware in LG section of this Forum.
3. Check phone's HW.

jafar321 · 08-17-2013, 07:52

how to flash E-900 ?

Octopus box · 08-19-2013, 07:23

Please read carefully Software manual (press "Cable & Manual" button).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-01-2000 23:28

11-23-2011, 14:42	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. We have tested this firmware, it is valid. Maybe, You have unpacked it incorrectly. Please re-download and unpack it again.

11-23-2011, 15:53	#3 (permalink)
dlasz Insane Poster Join Date: Apr 2005 Location: Budapest, Hungary Age: 46 Posts: 59 Member: 136872 Status: Offline Thanks Meter: 7	I re-download. Its OK. Write firmware done! But dont power on. Reconnect to box. Read phone info. Mode: Emergency pls help

11-23-2011, 17:04	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Please post here software log.

11-24-2011, 08:39	#5 (permalink)
dlasz Insane Poster Join Date: Apr 2005 Location: Budapest, Hungary Age: 46 Posts: 59 Member: 136872 Status: Offline Thanks Meter: 7	Platform: LG Qualcomm 2011.11.23. 15:12:14 > Selected port: COM44 2011.11.23. 15:12:14 > Selected model: E900 2011.11.23. 15:12:14 > Phone model: E900 2011.11.23. 15:12:14 > Mode: Emergency 2011.11.23. 15:12:15 > Opening "E900AT-00-V10b-HUN-XXX-NOV-09-2010+0.oct"...2011.11.23. 15:12:15 > OK 2011.11.23. 15:12:15 > Writing Firmware... 2011.11.23. 15:12:15 > -------------------------------------------------------------------------------- 2011.11.23. 15:12:15 > Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. 2011.11.23. 15:12:15 > -------------------------------------------------------------------------------- 2011.11.23. 15:12:42 > Checking partition...2011.11.23. 15:12:42 > OK 2011.11.23. 15:12:42 > Writing APPS boot...2011.11.23. 15:12:44 > OK 2011.11.23. 15:12:44 > Writing APPS...2011.11.23. 15:12:44 > OK 2011.11.23. 15:12:45 > Writing DSP1...2011.11.23. 15:12:52 > OK 2011.11.23. 15:12:52 > Writing AMSS...2011.11.23. 15:13:03 > OK 2011.11.23. 15:13:03 > Writing Windows Mobile...2011.11.23. 15:36:54 > OK 2011.11.23. 15:36:54 > Writing Firmware done! 2011.11.23. 15:36:54 > To finish the operation please power on phone and wait 3 minutes 2011.11.23. 15:38:02 > -------------------------------------------------------------------------------- 2011.11.23. 15:38:02 > Platform: LG Qualcomm 2011.11.23. 15:38:02 > Selected port: COM44 2011.11.23. 15:38:02 > Selected model: E900 2011.11.23. 15:38:02 > Phone model: E900 2011.11.23. 15:38:02 > Mode: Emergency

11-24-2011, 10:00	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	What was the problem (state) with your phone before? Why You have written this firmware?

11-24-2011, 10:27	#7 (permalink)
dlasz Insane Poster Join Date: Apr 2005 Location: Budapest, Hungary Age: 46 Posts: 59 Member: 136872 Status: Offline Thanks Meter: 7	The old firmware was not hungarian language.

11-24-2011, 11:15	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Most likely, You need to write firmware with phone's boots. Octopus Box LG software currently not supports of writing phone's boots for this phone model because of security reasons. We will prepare test version with such possibility and contact You for test.

11-24-2011, 11:52	#9 (permalink)
dlasz Insane Poster Join Date: Apr 2005 Location: Budapest, Hungary Age: 46 Posts: 59 Member: 136872 Status: Offline Thanks Meter: 7	I re-flash the original LG flasher (LGDP2_V36_UMTS.exe) and working fine.

03-24-2012, 19:38	#10 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	extract wit 7.zip and file OK. (with winzip E900AT-00-V10b-HUN-XXX-NOV-09-2010+0.octfile bad) Flash OK, phone live. But no HUN language:-( But now I hate them! IPhone, Symbian, Android, Bada, and now this. It is not missing:-(

11-21-2012, 07:12	#13 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. 1. Try to write different firmwares from the support area. 2. Try to write another firmware using original LG flasher and firmware. You can ask users about original LG flasher and firmware in LG section of this Forum. 3. Check phone's HW.

08-17-2013, 07:52	#14 (permalink)
jafar321 Major Poster Join Date: Mar 2009 Location: india,chenni Posts: 48 Member: 994618 Status: Offline Sonork: jafar321 Thanks Meter: 3	how to flash E-900 ?

08-19-2013, 07:23	#15 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Please read carefully Software manual (press "Cable & Manual" button).