Lg g2 ls 980 emergency calls only - GSM-Forum

omi22 · 10-14-2016, 09:45

i have lg g2 LS 980 with a problem facing emergency calls only,
FLASHED PHONE WITH
LS980ZV8_13.51097
NETWORK UNLOCKED WITH OCTOPLUS
REPAIR NETWORK
Welcome to Octoplus/Octopus Box LG Software version 2.4.4
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM67
Selected model: LS980
Reading info...
Model ID: LG-LS980
IMEI: 352596-06-114508-3
Android version: 4.2.2
Battery level: 10%
SW Version: LS980ZV8
Mode: Normal
Firmware compiled date: Jul 26 2013
Firmware compiled time: 23:00:00
Firmware released date: Nov 26 2013
Firmware released time: 11:04:30
SW Version: M8974A-AAAANAZM-1.0.190034
IMEI: 352596-06-114508-3
SPC: 971019
MEID: 99000252350345
Mobile ESN: 801DA1A3
SSD_A: D82FADFF74F759FF
SSD_B: 38529F6D7BBC530E
AKEY: 15255239843298171382
OTKSL: 002004
NAM Name: Sprint
MDN: 000-000-6228
User Lock Code: 6228
SID/NID: 4139 / 65535
MCC: 255
MNC: 01
MIN1: 0006228
MIN2: 000
Unlocking...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Sending network config...OK
Setting options...OK
Phone successfully unlocked!
Rebooting phone...
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS980
Firmware version: LS980ZV8_13
Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc
version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue
Nov 26 11:25:38 KST 201
Android version: 4.2.2
Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7
Processor rev 0 (v7l)
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS980
Firmware version: LS980ZV8_13
Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc
version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue
Nov 26 11:25:38 KST 201
Android version: 4.2.2
Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7
Processor rev 0 (v7l)
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS980
Firmware version: LS980ZV8_13
Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc
version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue
Nov 26 11:25:38 KST 201
Android version: 4.2.2
Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7
Processor rev 0 (v7l)
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS980
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.OK
Model ID: LG-LS980
Firmware version: LS980ZV8_13
Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc
version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue
Nov 26 11:25:38 KST 201
Android version: 4.2.2
Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7
Processor rev 0 (v7l)
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.4.4 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM67
Selected model: LS980
Reading info...
Model ID: LG-LS980
IMEI: 352596-06-114508-3
Android version: 4.2.2
Battery level: 11%
SW Version: LS980ZV8
Mode: Normal
Firmware compiled date: Jul 26 2013
Firmware compiled time: 23:00:00
Firmware released date: Nov 26 2013
Firmware released time: 11:04:30
SW Version: M8974A-AAAANAZM-1.0.190034
IMEI: 352596-06-114508-3
SPC: 971019
MEID: 99000252350345
Mobile ESN: 801DA1A3
SSD_A: D82FADFF74F759FF
SSD_B: 38529F6D7BBC530E
AKEY: 15255239843298171382
OTKSL: 002004
NAM Name: Sprint
MDN: 000-000-6228
User Lock Code: 6228
SID/NID: 4139 / 65535
MCC: 255
MNC: 01
MIN1: 0006228
MIN2: 000
Repairing Network...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Sending apn config...OK
Setting options...OK
Rebooting phone...
Performed by 2.4.4 Software version.

WRITE QCN FROM SUPPORT AREA BUT STILL CAN,T GET SERVICE
ANYONE CAN HELP?

Octopus box · 10-14-2016, 09:56

Please, install the latest Software version then try to perform Unlock operation, but don't perform Factory Reset operation after post here result.

omi22 · 10-14-2016, 10:36

now im downloading new flash file from support area
LS980ZV8_13.51097.OCT
THEN I,LL POST RESULTS AGAIN AFTER UNLOCKING

10-14-2016, 09:45	#1 (permalink)
omi22 Freak Poster Join Date: Dec 2014 Location: lahore Posts: 139 Member: 2309840 Status: Offline Sonork: 100.1673561 Thanks Meter: 11	Lg g2 ls 980 emergency calls only i have lg g2 LS 980 with a problem facing emergency calls only, FLASHED PHONE WITH LS980ZV8_13.51097 NETWORK UNLOCKED WITH OCTOPLUS REPAIR NETWORK Welcome to Octoplus/Octopus Box LG Software version 2.4.4 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM67 Selected model: LS980 Reading info... Model ID: LG-LS980 IMEI: 352596-06-114508-3 Android version: 4.2.2 Battery level: 10% SW Version: LS980ZV8 Mode: Normal Firmware compiled date: Jul 26 2013 Firmware compiled time: 23:00:00 Firmware released date: Nov 26 2013 Firmware released time: 11:04:30 SW Version: M8974A-AAAANAZM-1.0.190034 IMEI: 352596-06-114508-3 SPC: 971019 MEID: 99000252350345 Mobile ESN: 801DA1A3 SSD_A: D82FADFF74F759FF SSD_B: 38529F6D7BBC530E AKEY: 15255239843298171382 OTKSL: 002004 NAM Name: Sprint MDN: 000-000-6228 User Lock Code: 6228 SID/NID: 4139 / 65535 MCC: 255 MNC: 01 MIN1: 0006228 MIN2: 000 Unlocking... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Sending network config...OK Setting options...OK Phone successfully unlocked! Rebooting phone... To complete the operation, please make Factory Reset (Go to "Settings" -> "General" -> "Backup & reset" -> "Factory data reset", press "Reset phone" and "Erase everything" buttons). Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LG-LS980 Firmware version: LS980ZV8_13 Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Nov 26 11:25:38 KST 201 Android version: 4.2.2 Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Please, type ##3424# to get SPC / MSL / Service Code...Failed! Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LG-LS980 Firmware version: LS980ZV8_13 Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Nov 26 11:25:38 KST 201 Android version: 4.2.2 Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Please, type ##3424# to get SPC / MSL / Service Code...Failed! Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LG-LS980 Firmware version: LS980ZV8_13 Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Nov 26 11:25:38 KST 201 Android version: 4.2.2 Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Please, type ##3424# to get SPC / MSL / Service Code...Failed! Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS980 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.OK Model ID: LG-LS980 Firmware version: LS980ZV8_13 Kernel version: 3.4.0-perf-g1fe3c70 (lgmobile@LGEARND4B12) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Nov 26 11:25:38 KST 201 Android version: 4.2.2 Hardware: Qualcomm MSM 8974 (Flattened Device Tree) ARMv7 Processor rev 0 (v7l) Please, type ##3424# to get SPC / MSL / Service Code...Failed! Performed by 2.4.4 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM67 Selected model: LS980 Reading info... Model ID: LG-LS980 IMEI: 352596-06-114508-3 Android version: 4.2.2 Battery level: 11% SW Version: LS980ZV8 Mode: Normal Firmware compiled date: Jul 26 2013 Firmware compiled time: 23:00:00 Firmware released date: Nov 26 2013 Firmware released time: 11:04:30 SW Version: M8974A-AAAANAZM-1.0.190034 IMEI: 352596-06-114508-3 SPC: 971019 MEID: 99000252350345 Mobile ESN: 801DA1A3 SSD_A: D82FADFF74F759FF SSD_B: 38529F6D7BBC530E AKEY: 15255239843298171382 OTKSL: 002004 NAM Name: Sprint MDN: 000-000-6228 User Lock Code: 6228 SID/NID: 4139 / 65535 MCC: 255 MNC: 01 MIN1: 0006228 MIN2: 000 Repairing Network... Initializing ADB...OK Waiting for phone...OK Checking root access... Phone is already rooted. Sending apn config...OK Setting options...OK Rebooting phone... Performed by 2.4.4 Software version. WRITE QCN FROM SUPPORT AREA BUT STILL CAN,T GET SERVICE ANYONE CAN HELP?

10-14-2016, 09:56	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Please, install the latest Software version then try to perform Unlock operation, but don't perform Factory Reset operation after post here result. Last edited by Octopus box; 10-14-2016 at 10:11.

10-14-2016, 10:36	#3 (permalink)
omi22 Freak Poster Join Date: Dec 2014 Location: lahore Posts: 139 Member: 2309840 Status: Offline Sonork: 100.1673561 Thanks Meter: 11	now im downloading new flash file from support area LS980ZV8_13.51097.OCT THEN I,LL POST RESULTS AGAIN AFTER UNLOCKING