lg g710vm frp done

[maxpatri9]

no need TP

Performed by 2.9.6 Software version.
Please, select Reset FRP Method!
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect
phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear
"Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

Performed by 2.9.6 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect
phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear
"Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

Found port COM28
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...
Request has been successfully sent!
Obtaining response...OK
Reading partitions...OK
Searching signatures...
Step 1...
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
Rebooting phone...
Performed by 2.9.6 Software version.

[txinue]

Originally Posted by maxpatri9

no need TP

Performed by 2.9.6 Software version.
Please, select Reset FRP Method!
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect
phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear
"Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

Performed by 2.9.6 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect
phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear
"Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

Found port COM28
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...
Request has been successfully sent!
Obtaining response...OK
Reading partitions...OK
Searching signatures...
Step 1...
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
Rebooting phone...
Performed by 2.9.6 Software version.

No need TP?? You just conected in download mode or how?

[Octopus box]

To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect
phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear
"Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

As You can see from the Software log, You need to use TP

[txinue]

Originally Posted by Octopus box

As You can see from the Software log, You need to use TP

I know. But first post begin say ¨No need TP¨

[maxpatri9]

Originally Posted by txinue

I know. But first post begin say ¨No need TP¨

Sorry for my mistake u dont need test point u can enter to EDL check this video https://www.youtube.com/watch?v=6bNW1VzcPzE

[tamayo91]

No TP

Enter EDL Mode:

how to force EDL Qualcomm 9008 mode LG for Unbrick or unlock Bootloader

1) connect the phone to the PC via USB cable

2) hold and hold the buttons for restarting [Vol- Power] or [Vol- Vol+ Power] a countdown will appear (4 seconds)

3) as soon as the screen goes out, quickly and constantly click only on Vol+
the rest of the buttons (Vol- and Power) continue to hold without releasing

4) the screen will remain black and on the PC, the phone will be detect as a Qualcomm HS-USB QDLoader 9008 (COMxx) Ports in Device Manager

for Escape Qualcomm 9008 mode hold Vol- & Power


FRP LOG:

Welcome to Octoplus/Octopus Box LG Software version 2.9.2
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

Found port COM147
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...
Request has been successfully sent!
Obtaining response...OK
Reading partitions...OK
Searching signatures...
Step 1...
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
Rebooting phone...
Performed by 2.9.2 Software version.