Lg h959 after flash dead

[.::Munazzam::.]

Helloo Octopus Team
my lg h959 after flash dead

Welcome to Octoplus/Octopus Box LG Software version 2.5.5
Connecting to server support.octoplusbox.com:82...OK
Authorizing...OK
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM64
Selected model: H959
Reading info...
Could not detect mode!
Performed by 2.5.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM64
Selected model: H959
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: H95915E_11
Android version: 5.1.1
LAF Version: 1.1
Product ID: PT04S151005003313
IMEI: 355868-06-172951-4
Target operator: SPR
Hardware: rev_10
Opening "H95920a_00_0624.kdz"...OK
Firmware version: LGH959AT-00-V20a-GLOBAL-ESA-JUN-24-2016+0
Firmware model: LG-H959
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Verifying checkSums...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing 1/64 PrimaryGPT_0.bin...OK
Writing 2/64 modem_32768.bin...OK
Writing 3/64 pmic_196608.bin...OK
Writing 4/64 sbl1_197632.bin...OK
Writing 5/64 tz_199680.bin...OK
Writing 6/64 sdi_201728.bin...OK
Writing 7/64 hyp_202752.bin...OK
Writing 8/64 rpm_203776.bin...OK
Writing 9/64 aboot_204800.bin...OK
Writing 10/64 sbl1bak_208896.bin...OK
Writing 11/64 pmicbak_210944.bin...OK
Writing 12/64 tzbak_211968.bin...OK
Writing 13/64 hypbak_214016.bin...OK
Writing 14/64 rpmbak_215040.bin...OK
Writing 15/64 abootbak_216064.bin...OK
Writing 16/64 sdibak_220160.bin...OK
Writing 17/64 persist_262144.bin...OK
Writing 18/64 sec_344064.bin...OK
Writing 20/64 laf_360448.bin...OK
Writing 21/64 boot_458752.bin...OK
Writing 22/64 recovery_540672.bin...OK
Writing 23/64 factory_720896.bin...OK
Writing 24/64 raw_resources_835584.bin...OK
Writing 25/64 raw_resourcesbak_843776.bin...OK
Writing 26/64 system_851968.bin...OK
Writing 27/64 system_1115912.bin...OK
Writing 28/64 system_1380368.bin...OK
Writing 29/64 system_1640200.bin...OK
Writing 30/64 system_1644312.bin...OK
Writing 31/64 system_1904656.bin...OK
Writing 32/64 system_2164488.bin...OK
Writing 33/64 system_2168600.bin...OK
Writing 34/64 system_2428944.bin...OK
Writing 35/64 system_2688776.bin...OK
Writing 36/64 system_2692888.bin...OK
Writing 37/64 system_2953232.bin...OK
Writing 38/64 system_3213064.bin...OK
Writing 39/64 system_3217176.bin...OK
Writing 40/64 system_3477520.bin...OK
Writing 41/64 system_3739664.bin...OK
Writing 42/64 system_4001808.bin...OK
Writing 43/64 system_4263952.bin...OK
Writing 44/64 system_4526096.bin...OK
Writing 45/64 system_4788240.bin...OK
Writing 46/64 system_5050384.bin...OK
Writing 47/64 system_5312528.bin...OK
Writing 48/64 system_5574672.bin...OK
Writing 49/64 system_5836816.bin...OK
Writing 50/64 system_6098960.bin...OK
Writing 51/64 system_6361104.bin...OK
Writing 52/64 system_6619136.bin...OK
Writing 53/64 system_6623248.bin...OK
Writing 54/64 system_6881280.bin...OK
Writing 55/64 system_7143424.bin...OK
Writing 56/64 system_7405568.bin...OK
Writing 57/64 system_7407368.bin...OK
Writing 58/64 system_7411480.bin...OK
Writing 59/64 system_7929856.bin...OK
Writing 60/64 system_7931656.bin...OK
Writing 61/64 system_7934968.bin...OK
Writing 62/64 cust_8192000.bin...OK
Writing 63/64 cust_8454144.bin...OK
Writing 64/64 BackupGPT_61070336.bin...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.5.5 Software version.

where is problem

[Octopus box]

What was exact state of your phone? Why You have decided to re-flash it? Can You put the phone into Emergency Mode manually now?

[.::Munazzam::.]

before ok
just in apn setting showing only (restore to factry setting)
thats why i decied to flash
nothing showing any thing

[Octopus box]

Does the phone go into Emergency (Download) Mode? What device appear in PC Device Manager now, when You connect the phone to PC?

[.::Munazzam::.]

[IMG][/IMG]

[.::Munazzam::.]

Originally Posted by .::Munazzam::.

[IMG][/IMG]

u check this
showing care suite drivers

[Octopus box]

Please, check what phone model exactly do You have on phone's PCB?!

[.::Munazzam::.]

Originally Posted by Octopus box

Please, check what phone model exactly do You have on phone's PCB?!

yes same model on bord

[Octopus box]

Please make quality photo of your phone's PCB with model on it and post here.

[.::Munazzam::.]

Originally Posted by Octopus box

Please make quality photo of your phone's PCB with model on it and post here.

yes on bord LS996 MAIN 1.0

[Octopus box]

The LS996 and H959 aren't the same phone model. Most likely You have refurbished phone LS996 wit firmware for H959, that's the reason why You device is damage, when You flashed your device with firmware for another phone model.

You can try to repair your LS996 with Medusa Pro Software.