Ls665 need service code - GSM-Forum

gsaara · 08-19-2016, 10:52

Note: To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL.

ask,
service code need code

Octopus box · 08-19-2016, 11:09

Hello.

Menu is blocked by SPC/MSL code. Code can be provided by phone Network provider.

gsaara · 08-19-2016, 11:38

Quote:

Originally Posted by Octopus box

Hello.

Menu is blocked by SPC/MSL code. Code can be provided by phone Network provider.

Welcome to Octoplus/Octopus Box LG Software version 2.3.8
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS665
Reading info...Canceled!
Performed by 2.3.8 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS665
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable (or P990 cable)).
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.3.8 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM223
Selected model: LS665
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable (or P990 cable)).
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LS665ZV4_07
LAF Version: 1.1
Product ID: CD21S151011001583
IMEI: 355082-07-153530-5
Target operator: SPR
Hardware: rev_10
Reading partitions...OK
Resetting FRP Lock...
Resetting screen lock successfully completed!
Performed by 2.3.8 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS665
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS665
Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07
Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version
4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input 962690, go to "Diag" menu and select "Enable" option.
Performed by 2.3.8 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS665
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS665
Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07
Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version
4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input 962690, go to "Diag" menu and select "Enable" option.
Performed by 2.3.8 software version.

hi have code
IMEI
: 355082071535305 Code : nck=4911590879213207 spc=962690 otksl=064801 Submited On : 2016/08/19 15:37:54 Replied on : 2016/08/19 15:44:04
how to enter unlock lg Ls665

farhan2010 · 08-19-2016, 11:50

Root Phone . it ill not ask for code . and enable developer mode and connect in charging mode . 100% DOneee

gsaara · 08-19-2016, 13:41

Performed by 2.3.8 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS665
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS665
Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07
Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version
4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input 962690, go to "Diag" menu and select "Enable" option.

daig enable done

Octopus box · 08-19-2016, 14:11

Please reconnect the phone directly to PC, select "Charge only" connection option and repeat necessary operation.

umarmsn · 08-19-2016, 15:04

Quote:

Originally Posted by Octopus box

Please reconnect the phone directly to PC, select "Charge only" connection option and repeat necessary operation.

Welcome to Octoplus/Octopus Box LG Software version 2.3.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM11
Selected model: LS665
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS665
Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07
Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.3.9 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM11
Selected model: LS665
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS665
Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07
Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input 140611, go to "Diag" menu and select "Enable" option.
Performed by 2.3.9 software version.

but not getting next process

farhan2010 · 08-19-2016, 19:12

Did u root ur phone ?

umarmsn · 08-20-2016, 14:58

Quote:

Originally Posted by farhan2010

Did u root ur phone ?

no..............................

Octopus box · 08-22-2016, 11:49

Please do the next:
1. Isntall the following drivers
http://octoplusbox.com/files/drivers...Ver_3.12.3.exe
2. Restart PC.
3. Connect the phone directly to PC.
4. Select "Charge only" connection option on phone.
5. Repeat necessary operation.

umarmsn · 08-22-2016, 12:38

Quote:

Originally Posted by Octopus box

Please do the next:
1. Isntall the following drivers
http://octoplusbox.com/files/drivers...Ver_3.12.3.exe
2. Restart PC.
3. Connect the phone directly to PC.
4. Select "Charge only" connection option on phone.
5. Repeat necessary operation.

oh bro

i did flash this file LS665_ZV3_05.oct

after that not getting power

umarmsn · 08-22-2016, 12:59

Quote:

Originally Posted by umarmsn

oh bro

i did flash this file ls665_zv3_05.oct

after that not getting power

qhsusb_dload

only showing on device manager

08-19-2016, 10:52	#1 (permalink)
gsaara No Life Poster Join Date: Oct 2010 Location: colombo Posts: 2,341 Member: 1418524 Status: Offline Thanks Meter: 186	Ls665 need service code Note: To connect the phone in Normal Mode, do the next: Select "Charge Phone" in "USB PC Connection" menu. Type ##3424#, go to "Diag" menu and select "Enable". This menu is blocked by SPC/MSL. ask, service code need code

08-19-2016, 11:09	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. Menu is blocked by SPC/MSL code. Code can be provided by phone Network provider.

08-19-2016, 11:50	#4 (permalink)
farhan2010 Freak Poster Join Date: Aug 2013 Location: Faisalabad ' Punjab Pakistan Posts: 381 Member: 1994919 Status: Offline Sonork: 100.1670912 Thanks Meter: 120	Root Phone . it ill not ask for code . and enable developer mode and connect in charging mode . 100% DOneee

08-19-2016, 13:41	#5 (permalink)
gsaara No Life Poster Join Date: Oct 2010 Location: colombo Posts: 2,341 Member: 1418524 Status: Offline Thanks Meter: 186	Performed by 2.3.8 software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS665 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS665 Firmware version: LGLS665AT-00-ZV4-SPR-US-SEP-08-2015+07 Kernel version: 3.10.49-g68ab5a0 (lgmobile@LGEARND13B8) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 8 14:15:59 KST 201 Android version: 5.1.1 Hardware: Qualcomm Technologies, Inc MSM8916 0 Please, type ##3424# to get SPC / MSL / Service Code...OK Input 962690, go to "Diag" menu and select "Enable" option. daig enable done

08-19-2016, 14:11	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Please reconnect the phone directly to PC, select "Charge only" connection option and repeat necessary operation.

08-19-2016, 19:12	#8 (permalink)
farhan2010 Freak Poster Join Date: Aug 2013 Location: Faisalabad ' Punjab Pakistan Posts: 381 Member: 1994919 Status: Offline Sonork: 100.1670912 Thanks Meter: 120	Did u root ur phone ?

08-22-2016, 11:49	#10 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Please do the next: 1. Isntall the following drivers http://octoplusbox.com/files/drivers...Ver_3.12.3.exe 2. Restart PC. 3. Connect the phone directly to PC. 4. Select "Charge only" connection option on phone. 5. Repeat necessary operation.