LS990 Dead after Flashing - GSM-Forum

Ryusei · 09-12-2016, 20:47

after following the instructions for the Kill Switch, i flash the device and it tells me it was succssful at flashing but then it just stays on the LG Logo for hours and feels like it's over heating, I remove the battery and try a hardware reset but doesn't take me to the menu but shows me the android logo then back to LG and doesn't get past it. I try again with Flashing it, it works once again but then it will show the LG Logo and small white letters saying something about fastboot then the screen will go black with the LED light flashing between blue and red with nothing happening to the phone. I do not know what I did wrong here, I did one before and it work fine but when I did it to a second one it suddenly does that.

Octopus box · 09-13-2016, 07:06

Hello.

Please, post here full Software log with all performed operations, we will check it.

Ryusei · 09-13-2016, 19:06

Welcome to Octoplus/Octopus Box LG Software version 2.4.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS990OK
Sending loader...OK
Connecting to server ...OK
Initializing device...OK
Deactivating Kill Switch...OK
Please, reconnect the battery, put the phone in download mode manually and re-flash the phone.
Performed by 2.4.1 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM105
Selected model: LS990
Reading info...
Model ID: LGLS990
IMEI: 350305-26-000000-4
Android version: 4.4.2
Battery level: 22%
Mode: Emergency
Initializing flash...OK
SW version: LS990ZVB_00
LAF Version: 1.1
Product ID: PT02S140918000550
IMEI: 352596-06-281031-3
Target operator: SPR
Hardware: rev_10
Opening "LS990ZV8_00.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing dbi...OK
Writing aboot...OK
Writing rpm...OK
Writing tz...OK
Writing boot...OK
Writing persist...OK
Writing recovery...OK
Writing laf...OK
Writing factory...OK
Writing system...Failed!
Error code: ZXLCALSZXC
Performed by 2.4.1 software version.

this time it failed flashing it and then it does that error again

kumenger · 09-13-2016, 22:00

@ Ryusel
is z phone Repacked or Refurbished cellphones????? i have this error code sometimes...ZXLCALSZXC..what does it mean the error code octopus team...i min it is giving us error code..

Ryusei · 09-13-2016, 22:20

Quote:

Originally Posted by kumenger

@ Ryusel
is z phone Repacked or Refurbished cellphones????? i have this error code sometimes...ZXLCALSZXC..what does it mean the error code octopus team...i min it is giving us error code..

i really don't know if it's repackaged or refurbished.

cheddihouse · 09-13-2016, 22:25

some problem here after flashing the phone with this software LS990ZV8_00.oct phone dead and detected as Qualcomm HS-USB QDLoader 9008 i have medusa box /medusa pro is not working after update i used easy jtag to repair boot via direct emmc but phone always dead and in Qualcomm HS-USB QDLoader 9008 stat can you help us

log

Code:

Log file "C:\Program Files\Octoplus\Octoplus_LG\LOG\07-09-2016_22-49-40.log" created.
07/09/2016 22:49:47 > Welcome to Octoplus/Octopus Box LG Software version 2.1.8
07/09/2016 22:51:06 > --------------------------------------------------------------------------------
07/09/2016 22:51:06 > Checking data...07/09/2016 22:51:07 > OK
07/09/2016 22:51:07 > Platform: LG Qualcomm
07/09/2016 22:51:07 > Selected port: COM15
07/09/2016 22:51:07 > Selected model: LS980
07/09/2016 22:51:07 > Reading info...
07/09/2016 22:51:12 > Could not detect mode!
07/09/2016 22:51:14 > --------------------------------------------------------------------------------
07/09/2016 22:51:14 > Checking data...07/09/2016 22:51:15 > OK
07/09/2016 22:51:15 > Platform: LG Qualcomm
07/09/2016 22:51:15 > Selected port: COM237
07/09/2016 22:51:15 > Selected model: LS980
07/09/2016 22:51:15 > Reading info...
07/09/2016 22:51:19 > Model ID: LGLS990
07/09/2016 22:51:19 > IMEI: 352596-06-429387-2
07/09/2016 22:51:19 > Android version: 4.4.2
07/09/2016 22:51:19 > Battery level: 50%
07/09/2016 22:51:21 > Mode: Emergency
07/09/2016 22:51:21 > Initializing flash...07/09/2016 22:51:23 > OK
07/09/2016 22:51:24 > SW version: LS990ZV6_00
07/09/2016 22:51:24 > LAF Version: 1.0
07/09/2016 22:51:24 > Product ID: PT02S141118003450
07/09/2016 22:51:24 > IMEI: 352596-06-429387-2
07/09/2016 22:51:24 > Target operator: SPR
07/09/2016 22:51:24 > Hardware: rev_10
07/09/2016 22:51:24 > Opening "LS980ZV8_13.51097.oct"...07/09/2016 22:51:24 > OK
07/09/2016 22:51:24 > Setting options...07/09/2016 22:51:26 > OK
07/09/2016 22:51:26 > Reading partition...07/09/2016 22:51:30 > OK
07/09/2016 22:51:30 > Formating USERDATA...07/09/2016 22:51:34 > OK
07/09/2016 22:51:34 > Writing PrimaryGPT...07/09/2016 22:51:35 > OK
07/09/2016 22:51:35 > Writing modem...07/09/2016 22:52:01 > OK
07/09/2016 22:52:01 > Writing sbl1...07/09/2016 22:52:02 > OK
07/09/2016 22:52:02 > Writing dbi...07/09/2016 22:52:03 > OK
07/09/2016 22:52:03 > Writing aboot...07/09/2016 22:52:04 > OK
07/09/2016 22:52:04 > Writing rpm...07/09/2016 22:52:04 > OK
07/09/2016 22:52:04 > Writing boot...07/09/2016 22:52:10 > OK
07/09/2016 22:52:10 > Writing tz...07/09/2016 22:52:11 > OK
07/09/2016 22:52:11 > Writing persist...07/09/2016 22:52:14 > OK
07/09/2016 22:52:14 > Writing recovery...07/09/2016 22:52:19 > OK
07/09/2016 22:52:19 > Writing laf...07/09/2016 22:52:27 > OK
07/09/2016 22:52:27 > Writing system...07/09/2016 23:10:49 > OK
07/09/2016 23:10:49 > Writing cache...07/09/2016 23:11:01 > OK
07/09/2016 23:11:01 > Writing userdata...07/09/2016 23:17:29 > OK
07/09/2016 23:17:29 > Writing BackupGPT...07/09/2016 23:17:29 > OK
07/09/2016 23:17:29 > Reading partition...07/09/2016 23:17:34 > OK
07/09/2016 23:17:34 > Formating RCT...07/09/2016 23:17:38 > OK
07/09/2016 23:17:38 > Formating MPT...07/09/2016 23:17:42 > OK
07/09/2016 23:17:42 > Resetting FRP Lock...
07/09/2016 23:17:42 > Finalizing...07/09/2016 23:17:44 > OK
07/09/2016 23:17:44 > Writing firmware done!

Code:

---------- eMMC Device Information ----------EMMC CID : 11010030333247453400D4D063727132
EMMC CSD : D05E00320F5903FFFFFFFFEF924000D2
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 07/2014 Rev.0x0
EMMC NAME: 032GE4 , S/N: 3570426738
EMMC NAME (HEX): 30333247453400 
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 032GE4_3570426738_20160913_2229.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 44
MMCBLK0P0 (MODEM) Range: [0X1000000,0X4FFFE00] ,Len: 4000000
MMCBLK0P1 (SBL1) Range: [0X5000000,0X50FFE00] ,Len: 100000
MMCBLK0P2 (DBI) Range: [0X5100000,0X517FE00] ,Len: 80000
MMCBLK0P3 (DDR) Range: [0X5180000,0X51FFE00] ,Len: 80000
MMCBLK0P4 (ABOOT) Range: [0X5200000,0X53FFE00] ,Len: 200000
MMCBLK0P5 (RPM) Range: [0X5400000,0X54FFE00] ,Len: 100000
MMCBLK0P6 (TZ) Range: [0X5500000,0X55FFE00] ,Len: 100000
MMCBLK0P7 (PAD) Range: [0X5600000,0X5600E00] ,Len: 1000
MMCBLK0P8 (SBL1B) Range: [0X5601000,0X5700E00] ,Len: 100000
MMCBLK0P9 (DBIBAK) Range: [0X5701000,0X5780E00] ,Len: 80000
MMCBLK0P10 (RPMBAK) Range: [0X5781000,0X5880E00] ,Len: 100000
MMCBLK0P11 (TZBAK) Range: [0X5881000,0X5980E00] ,Len: 100000
MMCBLK0P12 (RPMF) Range: [0X5981000,0X5A80E00] ,Len: 100000
MMCBLK0P13 (TZF) Range: [0X5A81000,0X5B80E00] ,Len: 100000
MMCBLK0P14 (SDIF) Range: [0X5B81000,0X5C00E00] ,Len: 80000
MMCBLK0P15 (ABOOTF) Range: [0X5C01000,0X5E00E00] ,Len: 200000
MMCBLK0P16 (SPARE1) Range: [0X5E01000,0X5FFFE00] ,Len: 1FF000
MMCBLK0P17 (BOOT) Range: [0X6000000,0X6FFFE00] ,Len: 1000000
MMCBLK0P18 (PERSIST) Range: [0X7000000,0X8FFFE00] ,Len: 2000000
MMCBLK0P19 (RECOVERY) Range: [0X9000000,0X9FFFE00] ,Len: 1000000
MMCBLK0P20 (MODEMST1) Range: [0XA000000,0XA2FFE00] ,Len: 300000
MMCBLK0P21 (MODEMST2) Range: [0XA300000,0XA5FFE00] ,Len: 300000
MMCBLK0P22 (PAD1) Range: [0XA600000,0XA600E00] ,Len: 1000
MMCBLK0P23 (FSG) Range: [0XA601000,0XA900E00] ,Len: 300000
MMCBLK0P24 (FSC) Range: [0XA901000,0XA980E00] ,Len: 80000
MMCBLK0P25 (SSD) Range: [0XA981000,0XAA00E00] ,Len: 80000
MMCBLK0P26 (PAD2) Range: [0XAA01000,0XAA01E00] ,Len: 1000
MMCBLK0P27 (ENCRYPT) Range: [0XAA02000,0XAA81E00] ,Len: 80000
MMCBLK0P28 (EKSST) Range: [0XAA82000,0XAB01E00] ,Len: 80000
MMCBLK0P29 (RCT) Range: [0XAB02000,0XAB03E00] ,Len: 2000
MMCBLK0P30 (SPARE2) Range: [0XAB04000,0XAFFFE00] ,Len: 4FC000
MMCBLK0P31 (MISC) Range: [0XB000000,0XBFFFE00] ,Len: 1000000
MMCBLK0P32 (LAF) Range: [0XC000000,0XDFFFE00] ,Len: 2000000
MMCBLK0P33 (FOTA) Range: [0XE000000,0XFFFFE00] ,Len: 2000000
MMCBLK0P34 (SPARE3) Range: [0X10000000,0X10FFFE00] ,Len: 1000000
MMCBLK0P35 (DRM) Range: [0X11000000,0X117FFE00] ,Len: 800000
MMCBLK0P36 (SNS) Range: [0X11800000,0X11FFFE00] ,Len: 800000
MMCBLK0P37 (MPT) Range: [0X12000000,0X13FFFE00] ,Len: 2000000
MMCBLK0P38 (CARRIER) Range: [0X14000000,0X167FFE00] ,Len: 2800000
MMCBLK0P39 (FACTORY) Range: [0X16800000,0X17FFFE00] ,Len: 1800000
MMCBLK0P40 (SYSTEM) Range: [0X18000000,0XCBFFFE00] ,Len: B4000000
MMCBLK0P41 (CACHE) Range: [0XCC000000,0X100FFFE00] ,Len: 35000000
MMCBLK0P42 (USERDATA) Range: [0X101000000,0X3A9FFFE00] ,Len: 2A9000000
MMCBLK0P43 (GROW) Range: [0X3AA000000,0X747BFBC00] ,Len: 39DBFBE00
Done...Presets has been updated...

Done.

Octopus box · 09-14-2016, 07:07

@cheddihouse

According to the Software log, You are reflash your LS990 phone model with LS980 firmware (LS980ZV8_13.51097.oct) we can't predict the result of such experiments.
Please, check more carefully phone model You have and firmwares which You trying to write.

Octopus box · 09-14-2016, 07:09

@Ryusei

Hello.

In which condition your phone is now? Can You put it into Emergency mode manually ?

Ryusei · 09-14-2016, 18:01

Quote:

Originally Posted by Octopus box

@Ryusei

Hello.

In which condition your phone is now? Can You put it into Emergency mode manually ?

no i can not put it into emergency mode, when I try to I get the LG Logo and white text saying something about a fast boot error, it goes away too fast for me to see the whole messages but once it's gone the LED status light blink one blue and one red/orange back and forth

Octopus box · 09-15-2016, 09:56

Most likely your boot area is damaged, You can try to repair your device with Medusa Pro Software via eMMC.

Ryusei · 09-15-2016, 17:37

Quote:

Originally Posted by Octopus box

Most likely your boot area is damaged, You can try to repair your device with Medusa Pro Software via eMMC.

are there any instructions on doing that? I'll be honest, I only just use Octoplus for flashing and unlocking so I really wouldn't know how to do that.

Octopus box · 09-15-2016, 17:51

You can use the following video as a guideline for repair:

09-12-2016, 20:47	#1 (permalink)
Ryusei Crazy Poster Join Date: May 2014 Posts: 54 Member: 2179170 Status: Offline Thanks Meter: 2	LS990 Dead after Flashing after following the instructions for the Kill Switch, i flash the device and it tells me it was succssful at flashing but then it just stays on the LG Logo for hours and feels like it's over heating, I remove the battery and try a hardware reset but doesn't take me to the menu but shows me the android logo then back to LG and doesn't get past it. I try again with Flashing it, it works once again but then it will show the LG Logo and small white letters saying something about fastboot then the screen will go black with the LED light flashing between blue and red with nothing happening to the phone. I do not know what I did wrong here, I did one before and it work fine but when I did it to a second one it suddenly does that.

09-14-2016, 07:07	#7 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,816 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	@cheddihouse According to the Software log, You are reflash your LS990 phone model with LS980 firmware (LS980ZV8_13.51097.oct) we can't predict the result of such experiments. Please, check more carefully phone model You have and firmwares which You trying to write. Last edited by Octopus box; 09-14-2016 at 07:14.

09-13-2016, 07:06	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,816 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Hello. Please, post here full Software log with all performed operations, we will check it.

09-13-2016, 19:06	#3 (permalink)
Ryusei Crazy Poster Join Date: May 2014 Posts: 54 Member: 2179170 Status: Offline Thanks Meter: 2	Welcome to Octoplus/Octopus Box LG Software version 2.4.1 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS990OK Sending loader...OK Connecting to server ...OK Initializing device...OK Deactivating Kill Switch...OK Please, reconnect the battery, put the phone in download mode manually and re-flash the phone. Performed by 2.4.1 software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM105 Selected model: LS990 Reading info... Model ID: LGLS990 IMEI: 350305-26-000000-4 Android version: 4.4.2 Battery level: 22% Mode: Emergency Initializing flash...OK SW version: LS990ZVB_00 LAF Version: 1.1 Product ID: PT02S140918000550 IMEI: 352596-06-281031-3 Target operator: SPR Hardware: rev_10 Opening "LS990ZV8_00.oct"...OK Setting options...OK Reading partitions...OK Formating USERDATA...OK Writing PrimaryGPT...OK Writing modem...OK Writing sbl1...OK Writing dbi...OK Writing aboot...OK Writing rpm...OK Writing tz...OK Writing boot...OK Writing persist...OK Writing recovery...OK Writing laf...OK Writing factory...OK Writing system...Failed! Error code: ZXLCALSZXC Performed by 2.4.1 software version. this time it failed flashing it and then it does that error again

09-13-2016, 22:00	#4 (permalink)
kumenger Freak Poster Join Date: Jun 2012 Location: Ethiopia \|\| united State Posts: 340 Member: 1770631 Status: Offline Sonork: id Thanks Meter: 89	@ Ryusel is z phone Repacked or Refurbished cellphones????? i have this error code sometimes...ZXLCALSZXC..what does it mean the error code octopus team...i min it is giving us error code..

09-14-2016, 07:09	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,816 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	@Ryusei Hello. In which condition your phone is now? Can You put it into Emergency mode manually ?

09-15-2016, 09:56	#10 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,816 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	Most likely your boot area is damaged, You can try to repair your device with Medusa Pro Software via eMMC.

09-15-2016, 17:51	#12 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,816 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,407	You can use the following video as a guideline for repair: