KH3100 unlock faild and not power on - GSM-Forum

ruwanjk · 10-04-2010, 17:53

I have KH3100 for unlock and when flash it, it was stop in Writing MIBIB
now phone not detect in usb
please help me to make it alive

Welcome to Octopus box software version 1.4.9
----------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM32
Selected model: KH3100
Mode: Normal
Phone model: KW310904
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 353942-03-084998-4
Before writing firmware, please fully charge phone battery.
Opening "KW310908_00.oct"...OK
Reading NVM...
Reading NVM done!
Backup saved to "KH3100-353942030849984_04-10-2010_22-06-
56.nvm"
Switching to Download mode...OK
Writing Firmware...
Erasing EFS...OK
Writing MIBIB...Failed!
----------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM32
Selected model: KH3100
Mode: Emergency
Before writing firmware, please fully charge phone battery.
Opening "KW310908_00.oct"...OK
Writing Firmware...
Erasing EFS...OK
Writing MIBIB...OK
Writing QCSBL...OK
Writing OEMSBL1...OK
Writing OEMSBL2...OK
Writing AMSS...Failed!
----------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM6
Selected model: KH3100
Phone not detected. Please try again.
----------------------------------------------------------------------------------

Octopus box · 10-04-2010, 18:02

Hello.
Please fully charge phone's battery! Then put phone into "emergency" mode and re-flash phone again.
To switch your phone into "emergency" mode You need:
1. Disconnect cable, reconnect battery, connect cable;
2. Press and hold "2"+"5"+"Power ON" keys.

ruwanjk · 10-04-2010, 21:17

battery fully charged it was connected in emergency mode but it was start and stop now not even connected in emergency mode please help

Octopus box · 10-05-2010, 10:06

Quote:

Originally Posted by ruwanjk

I have KH3100 for unlock and when flash it, it was stop in Writing MIBIB
now phone not detect in usb
please help me to make it alive

You need to use JTAG tool to repair.

ruwanjk · 10-05-2010, 16:50

is there any way to connect it to octopus box ???

Octopus box · 10-05-2010, 17:05

If the phone not connects in "Emergency" mode, You need to use JTAG tool to repair it.

ricson · 10-07-2010, 04:53

Quote:

Originally Posted by Octopus box

If the phone not connects in "Emergency" mode, You need to use JTAG tool to repair it.

thats the reason why i posted this thread hope team would listen

http://forum.gsmhosting.com/vbb/f594...orted-1094397/

sygnal · 10-07-2010, 04:58

octopus need to look at this

there is a problem with the sw of octopus thats why now the phone is damage,correct it so user like me will not need jtag

freedomqn · 10-07-2010, 05:05

direck unlock like other,no need patch file for risk
i think team need do this

Gsmserver · 10-07-2010, 07:28

Like other? Like who?

Unlocking with Octopus is safe. Not safe is to write full firmware with empty battery.
You should always check battery charge before flashing. Not with bars on phone screen, but with multimeter.
If you are afraid of killing phone and your fw version is not supported - make dumps, upload them somewhere and wait for update.

ruwanjk · 10-07-2010, 14:35

If you know jtag pinout for kh3100 please post

scorpion_bashee · 10-18-2011, 16:18

Quote:

Originally Posted by ruwanjk

i have kh3100 for unlock and when flash it, it was stop in writing mibib
now phone not detect in usb
please help me to make it alive

welcome to octopus box software version 1.4.9
----------------------------------------------------------------------------------
platform: Lg qualcomm
selected port: Com32
selected model: Kh3100
mode: Normal
phone model: Kw310904
sw version: M6281a-klvz-4.0.9530t
imei: 353942-03-084998-4
before writing firmware, please fully charge phone battery.
Opening "kw310908_00.oct"...ok
reading nvm...
Reading nvm done!
Backup saved to "kh3100-353942030849984_04-10-2010_22-06-
56.nvm"
switching to download mode...ok
writing firmware...
Erasing efs...ok
writing mibib...failed!
----------------------------------------------------------------------------------
platform: Lg qualcomm
selected port: Com32
selected model: Kh3100
mode: Emergency
before writing firmware, please fully charge phone battery.
Opening "kw310908_00.oct"...ok
writing firmware...
Erasing efs...ok
writing mibib...ok
writing qcsbl...ok
writing oemsbl1...ok
writing oemsbl2...ok
writing amss...failed!
----------------------------------------------------------------------------------
platform: Lg qualcomm
selected port: Com6
selected model: Kh3100
phone not detected. Please try again.
----------------------------------------------------------------------------------

sir have ready that phone me too dead while flash cyon kh 3100 plz help me

Octopus box · 10-18-2011, 16:21

Hello.
Please post here full software log with all of your actions.

scorpion_bashee · 10-21-2011, 07:07

Quote:

Originally Posted by Octopus box

Hello.
Please post here full software log with all of your actions.

Platform: LG Qualcomm
Selected port: COM32
Selected model: KH3100
Mode: Normal
Phone model: KW310904
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 353942-03-084998-4
Before writing firmware, please fully charge phone battery.
Opening "KW310908_00.oct"...OK
Reading NVM...
Reading NVM done!
Backup saved to "KH3100-353942030849984_04-10-2010_22-06-
56.nvm"
Switching to Download mode...OK
Writing Firmware...
Erasing EFS...OK
Writing MIBIB...Failed!

after that phone not booting (phone not power on) i tried 2+5 key while

try to boot mode also no use . please help me

Octopus box · 10-21-2011, 07:13

If the phone not connects in "Emergency" mode, You need to use JTAG tool to repair it.

10-04-2010, 17:53	#1 (permalink)
ruwanjk No Life Poster Join Date: Aug 2004 Location: sri lanka Posts: 628 Member: 77437 Status: Offline Sonork: 100.1582159 Thanks Meter: 93	KH3100 unlock faild and not power on I have KH3100 for unlock and when flash it, it was stop in Writing MIBIB now phone not detect in usb please help me to make it alive Welcome to Octopus box software version 1.4.9 ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM32 Selected model: KH3100 Mode: Normal Phone model: KW310904 SW Version: M6281A-KLVZ-4.0.9530T IMEI: 353942-03-084998-4 Before writing firmware, please fully charge phone battery. Opening "KW310908_00.oct"...OK Reading NVM... Reading NVM done! Backup saved to "KH3100-353942030849984_04-10-2010_22-06- 56.nvm" Switching to Download mode...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...Failed! ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM32 Selected model: KH3100 Mode: Emergency Before writing firmware, please fully charge phone battery. Opening "KW310908_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...Failed! ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM6 Selected model: KH3100 Phone not detected. Please try again. ----------------------------------------------------------------------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

10-04-2010, 18:02	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. Please fully charge phone's battery! Then put phone into "emergency" mode and re-flash phone again. To switch your phone into "emergency" mode You need: 1. Disconnect cable, reconnect battery, connect cable; 2. Press and hold "2"+"5"+"Power ON" keys.

10-04-2010, 21:17	#3 (permalink)
ruwanjk No Life Poster Join Date: Aug 2004 Location: sri lanka Posts: 628 Member: 77437 Status: Offline Sonork: 100.1582159 Thanks Meter: 93	battery fully charged it was connected in emergency mode but it was start and stop now not even connected in emergency mode please help

10-05-2010, 16:50	#5 (permalink)
ruwanjk No Life Poster Join Date: Aug 2004 Location: sri lanka Posts: 628 Member: 77437 Status: Offline Sonork: 100.1582159 Thanks Meter: 93	is there any way to connect it to octopus box ???

10-05-2010, 17:05	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	If the phone not connects in "Emergency" mode, You need to use JTAG tool to repair it.

10-07-2010, 04:58	#8 (permalink)
sygnal No Life Poster Join Date: Feb 2006 Posts: 943 Member: 235471 Status: Offline Thanks Meter: 57	octopus need to look at this there is a problem with the sw of octopus thats why now the phone is damage,correct it so user like me will not need jtag

10-07-2010, 05:05	#9 (permalink)
freedomqn No Life Poster Join Date: Sep 2006 Location: 102 quy nhơn BĐ Age: 14 Posts: 1,097 Member: 347720 Status: Offline Sonork: xxx Thanks Meter: 204	direck unlock like other,no need patch file for risk i think team need do this

10-07-2010, 07:28	#10 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,147 Member: 21077 Status: Offline Thanks Meter: 116,340	Like other? Like who? Unlocking with Octopus is safe. Not safe is to write full firmware with empty battery. You should always check battery charge before flashing. Not with bars on phone screen, but with multimeter. If you are afraid of killing phone and your fw version is not supported - make dumps, upload them somewhere and wait for update.

10-07-2010, 14:35	#11 (permalink)
ruwanjk No Life Poster Join Date: Aug 2004 Location: sri lanka Posts: 628 Member: 77437 Status: Offline Sonork: 100.1582159 Thanks Meter: 93	If you know jtag pinout for kh3100 please post

10-18-2011, 16:21	#13 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. Please post here full software log with all of your actions.

10-21-2011, 07:13	#15 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	If the phone not connects in "Emergency" mode, You need to use JTAG tool to repair it.