LG H932 ROOT done and unlock by octoplus

[ghacks]

Welcome to Octoplus/Octopus Box LG Software version 2.9.7.01
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM219
Selected model: H932
Reading info...
Model ID: LG-H932
IMEI: 358165-08-077503-3
Android version: 7.1.2
Battery level: 86%
Mode: Normal
Firmware compiled date: Sep 14 2017
Firmware compiled time: 04:00:00
Firmware released date: Jan 11 2018
Firmware released time: 13:13:40
Bluetooth address: B4:F1A:65:11:C2
Wi-Fi MAC address: B4:F1A:B64:3F
Performed by 2.9.7.01 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: Dubr509
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM219
Selected model: H932
Reading info...
Model ID: LG-H932
IMEI: 358165-08-077503-3
Android version: 7.1.2
Battery level: 86%
Mode: Normal
Firmware compiled date: Sep 14 2017
Firmware compiled time: 04:00:00
Firmware released date: Jan 11 2018
Firmware released time: 13:13:40
SW Version: MPSS.AT.2.5.c1.2-00017-8998_GEN_PACK-
1.112143.14
IMEI: 358165-08-077503-3
Bluetooth address: B4:F1A:65:11:C2
Wi-Fi MAC address: B4:F1A:B64:3F
SPC: 000000
Checking root access...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Please, reboot the phone and try again.
Performed by 2.9.7.01 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM219
Selected model: H932
Reading info...
Model ID: LG-H932
IMEI: 358165-08-077503-3
Android version: 7.1.2
Battery level: 86%
Mode: Normal
Firmware compiled date: Sep 14 2017
Firmware compiled time: 04:00:00
Firmware released date: Jan 11 2018
Firmware released time: 13:13:40
SW Version: MPSS.AT.2.5.c1.2-00017-8998_GEN_PACK-
1.112143.14
IMEI: 358165-08-077503-3
Bluetooth address: B4:F1A:65:11:C2
Wi-Fi MAC address: B4:F1A:B64:3F
SPC: 000000
Checking root access...
Initializing ADB...OK
Waiting for phone...OK
Phone is already rooted.
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Dubr509
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Sending data to server...
Sending exploit...OK
Executing exploit...OK
Calculating. Please Wait...OK
Calculating. Please Wait...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.7.01 Software version.