Successfully Unlocked/Debranding phones w/Octopusbox - Page 132 - GSM-Forum

Nadoui · 06-09-2012, 10:04

Welcome to Octopus Box LG Software version 2.1.1
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM49
Selected model: KF700
Mode: Normal
Phone model: KF700
SW Version: KF700-MSM6280-V10e-JUL-01-2008-XX
IMEI: 353357-02-050842-7
Bluetooth address: 00:1F:6B:BF:6F:A4
Firmware compiled date: FEB 22 2008
Firmware compiled time: 09:00:00
Firmware released date: Jun 30 2008
Firmware released time: 21:09:29
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM49
Selected model: KF700
Mode: Normal
Phone model: KF700
SW Version: KF700-MSM6280-V10e-JUL-01-2008-XX
IMEI: 353357-02-050842-7
Bluetooth address: 00:1F:6B:BF:6F:A4
Checking security...OK
Unlocking...
Prepairing loader...OK
Sending loader...OK
Reading security area...
Backup saved to "KF700-353357020508427_09-06-2012_11-00-13.sec"
Erasing security area...OK
Writing security area...OK
Phone successfully unlocked!
Rebooting phone...

champions1 · 06-09-2012, 13:18

just connect with usb cable turned off phone and install drivers.
press unlock and wait untill all done

.

Platform: LG Qualcomm
Selected port: COM186
Selected model: E400
Reading info...OK
Mode: Normal
Model ID: E400
Firmware compiled date: Nov 17 2011
Firmware compiled time: 22:00:00
Firmware released date: Mar 31 2012
Firmware released time: 01:10:16
IMEI: 351895-05-425206-7
Bluetooth address: 10:F9:6F:0B:5C:38
Switching to Download mode...OK
Unlocking...
To avoid damaging your phone, please, follow these simple precautions:
Use a clean PC (without any installed drivers and software for BlackBerry phones, modem Dashboard software, Phone PC suites software).
Please, make sure the phone's battery is fully charged.
You should not run any other programs or attach new devices to your computer during this operation!
Sending loader...OK
Searching security area...OK
Reading security area...OK
Backup saved to "E400_09-06-2012_12-55-32.SEC"
Analyzing security...OK
IMEI: 351895-05-425206-7
Bluetooth address: 10:F9:6F:0B:5C:38
Unlocking...OK
Writing security area...OK
Switching to Normal mode...OK
Found model E400 at port COM186
Finalizing...OK
Rebooting phone...OK
Phone successfully unlocked!
Rebooting phone...

Nadoui · 06-11-2012, 23:26

Platform: LG Qualcomm
Selected port: COM49
Selected model: KU990
Mode: Normal
Phone model: KU990
SW Version: KU990-MSM6280-V10g-AUG-12-2008-XX
IMEI: 354935-02-191383-4
Bluetooth address: 00:1F:E3:CF:C6:2D
Checking security...OK
Unlocking...
Prepairing loader...OK
Sending loader...OK
Reading security area...OK
Backup saved to "KU990-354935021913834_11-06-2012_14-48-46.sec"
Checking security...
Warning: Security signs are not valid.OK
Patching security...OK
Writing security area...OK
Phone successfully unlocked!
Rebooting phone...

xseven · 06-12-2012, 02:45

Quote:

Originally Posted by fredinho

Lg900 sucessfully converted and unlocked

Welcome to Octopus Box LG Software version 1.9.0
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port:
Selected baudrate: 0
Selected model: GW300
Disconnect battery and connect USB cable to phone...Canceled!
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port:
Selected baudrate: 0
Selected model: GW300
Disconnect battery and connect USB cable to phone...OK
Sending preloader...OK
Reconnecting phone...OK
Sending loader...OK
Reading info...OK
IMEI: 012192-00-298627-2
Bluetooth address: B0:89:91:2F:38:74
NAND flash ID: ECB1
NAND flash chip: Samsung
Opening "LG900G-to-GW300-FOR-UNLOCK.oct"...OK
Repair mode: No
Writing Firmware...OK
Disconnected.
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port:
Selected baudrate: 0
Selected model: GW300
Disconnect battery and connect USB cable to phone...OK
Sending preloader...OK
Reconnecting phone...OK
Sending loader...OK
Reading info...OK
IMEI: 012192-00-298627-2
Bluetooth address: B0:89:91:2F:38:74
NAND flash ID: ECB1
NAND flash chip: Samsung
Unlocking...
Reading security area...OK
Writing security area...OK
Phone successfully unlocked!
The device has been disconnected.

use windows xp or 7?

Nadoui · 06-13-2012, 00:10

Platform: LG Infineon
Selected port: COM7
Selected baudrate: 921600
Selected model: KP501
Please reconnect battery, press and hold power button...
Phone found.
Release power button.
Sending loader...OK
Reading info. Please wait...
IMEI: 357014-03-713267-7
Unlocking...
Reading security area...
Backup saved to
"KP501-357014037132677_12-06-2012_11-13-03.eep"
Writing security area...
Phone successfully unlocked!
Reading codes. Please wait...
--------------------------------------------------------------------------------
Unlock code: 1863 1206
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Go to menu>Settings>Security>SIMLOCK and enter the code.

taki7610 · 06-13-2012, 09:53

Code:

Log file "C:\Program Files\GsmServer\Octopus_LG\LOG\13-06-2012_14-51-56.log" created.
6/13/2012 2:52:00 PM > Welcome to Octopus Box LG Software version 2.1.3
6/13/2012 2:52:45 PM > --------------------------------------------------------------------------------
6/13/2012 2:52:45 PM > Platform: LG Qualcomm
6/13/2012 2:52:45 PM > Selected port: COM5
6/13/2012 2:52:45 PM > Selected model: E510
6/13/2012 2:52:45 PM > Reading info...6/13/2012 2:52:47 PM > Failed!
6/13/2012 2:52:47 PM > Could not detect mode.
6/13/2012 2:52:50 PM > --------------------------------------------------------------------------------
6/13/2012 2:52:50 PM > Platform: LG Qualcomm
6/13/2012 2:52:50 PM > Selected port: COM58
6/13/2012 2:52:50 PM > Selected model: E510
6/13/2012 2:52:50 PM > Reading info...6/13/2012 2:52:50 PM > Failed!
6/13/2012 2:52:50 PM > Port busy
6/13/2012 2:52:54 PM > --------------------------------------------------------------------------------
6/13/2012 2:52:54 PM > Platform: LG Qualcomm
6/13/2012 2:52:54 PM > Selected port: COM4
6/13/2012 2:52:54 PM > Selected model: E510
6/13/2012 2:52:54 PM > Reading info...6/13/2012 2:52:56 PM > Failed!
6/13/2012 2:52:56 PM > Could not detect mode.
6/13/2012 2:55:38 PM > --------------------------------------------------------------------------------
6/13/2012 2:55:38 PM > Platform: LG Qualcomm
6/13/2012 2:55:38 PM > Selected port: COM4
6/13/2012 2:55:38 PM > Selected model: E510
6/13/2012 2:55:38 PM > Reading info...6/13/2012 2:55:40 PM > Failed!
6/13/2012 2:55:41 PM > Could not detect mode.
6/13/2012 2:55:44 PM > --------------------------------------------------------------------------------
6/13/2012 2:55:44 PM > Platform: LG Qualcomm
6/13/2012 2:55:44 PM > Selected port: COM125
6/13/2012 2:55:44 PM > Selected model: E510
6/13/2012 2:55:44 PM > Reading info...6/13/2012 2:55:44 PM > Failed!
6/13/2012 2:55:44 PM > Port busy
6/13/2012 2:55:47 PM > --------------------------------------------------------------------------------
6/13/2012 2:55:47 PM > Platform: LG Qualcomm
6/13/2012 2:55:47 PM > Selected port: COM5
6/13/2012 2:55:47 PM > Selected model: E510
6/13/2012 2:55:47 PM > Reading info...6/13/2012 2:55:50 PM > Failed!
6/13/2012 2:55:50 PM > Could not detect mode.
6/13/2012 2:56:10 PM > --------------------------------------------------------------------------------
6/13/2012 2:56:10 PM > Platform: LG Qualcomm
6/13/2012 2:56:10 PM > Selected port: COM5
6/13/2012 2:56:10 PM > Selected model: E510
6/13/2012 2:56:10 PM > Reading info...6/13/2012 2:56:14 PM > Failed!
6/13/2012 2:56:14 PM > Could not detect mode.
6/13/2012 2:57:09 PM > --------------------------------------------------------------------------------
6/13/2012 2:57:09 PM > Platform: LG Qualcomm
6/13/2012 2:57:09 PM > Selected port: COM126
6/13/2012 2:57:09 PM > Selected model: E510
6/13/2012 2:57:09 PM > Reading info...6/13/2012 2:57:09 PM > OK
6/13/2012 2:57:09 PM > Mode: Normal
6/13/2012 2:57:09 PM > Model ID: E510
6/13/2012 2:57:09 PM > Firmware compiled date: May 25 2011
6/13/2012 2:57:09 PM > Firmware compiled time: 06:00:00
6/13/2012 2:57:09 PM > Firmware released date: Nov  4 2011
6/13/2012 2:57:09 PM > Firmware released time: 22:04:12
6/13/2012 2:57:09 PM > IMEI: 358688-04-407991-1
6/13/2012 2:57:09 PM > Bluetooth address: F0:1C:13:D5:6A:24
6/13/2012 2:57:14 PM > --------------------------------------------------------------------------------
6/13/2012 2:57:14 PM > Platform: LG Qualcomm
6/13/2012 2:57:14 PM > Selected port: COM126
6/13/2012 2:57:14 PM > Selected model: E510
6/13/2012 2:57:14 PM > Reading info...6/13/2012 2:57:14 PM > OK
6/13/2012 2:57:14 PM > Mode: Normal
6/13/2012 2:57:14 PM > Model ID: E510
6/13/2012 2:57:14 PM > Firmware compiled date: May 25 2011
6/13/2012 2:57:14 PM > Firmware compiled time: 06:00:00
6/13/2012 2:57:14 PM > Firmware released date: Nov  4 2011
6/13/2012 2:57:14 PM > Firmware released time: 22:04:12
6/13/2012 2:57:14 PM > IMEI: 358688-04-407991-1
6/13/2012 2:57:14 PM > Bluetooth address: F0:1C:13:D5:6A:24
6/13/2012 2:57:14 PM > Switching to Download mode...6/13/2012 2:57:17 PM > OK
6/13/2012 2:57:17 PM > To avoid damaging your phone, please, follow these simple precautions:
Use a clean PC (without any installed drivers and software for BlackBerry phones, modem Dashboard software, Phone PC suites software).
Please, make sure the phone's battery is fully charged.
You should not run any other programs or attach new devices to your computer during this operation!
6/13/2012 2:57:27 PM > Canceled!
6/13/2012 3:04:17 PM > Connecting to server octopus-server0.no-ip.biz:82...6/13/2012 3:04:19 PM > OK
6/13/2012 3:04:19 PM > Authorizing...6/13/2012 3:04:20 PM > OK
6/13/2012 3:11:05 PM > Connecting to server octopus-server0.no-ip.biz:82...6/13/2012 3:11:06 PM > OK
6/13/2012 3:11:06 PM > Authorizing...6/13/2012 3:11:07 PM > OK
6/13/2012 3:13:56 PM > Connecting to server octopus-server0.no-ip.biz:82...6/13/2012 3:13:57 PM > OK
6/13/2012 3:13:57 PM > Authorizing...6/13/2012 3:14:00 PM > OK
6/13/2012 3:19:43 PM > Connecting to server octopus-server0.no-ip.biz:82...6/13/2012 3:19:44 PM > OK
6/13/2012 3:19:44 PM > Authorizing...6/13/2012 3:19:46 PM > OK
6/13/2012 3:28:27 PM > Converting files...
6/13/2012 3:28:27 PM > Phone model: E510
6/13/2012 3:28:27 PM > Files:
6/13/2012 3:28:27 PM > File ?1: C:\Users\USER\Downloads\Compressed\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0.dz
6/13/2012 3:28:27 PM > File ?2: 
6/13/2012 3:28:27 PM > File ?3: 
6/13/2012 3:28:27 PM > File ?4: 
6/13/2012 3:28:27 PM > File ?5: 
6/13/2012 3:28:27 PM > File ?6: 
6/13/2012 3:28:27 PM > File ?7: 
6/13/2012 3:28:27 PM > File ?8: 
6/13/2012 3:28:27 PM > File ?9: 
6/13/2012 3:28:27 PM > File ?10: 
6/13/2012 3:28:27 PM > File ?11: 
6/13/2012 3:28:27 PM > Platform: LG Qualcomm
6/13/2012 3:28:28 PM > Result file: C:\Users\USER\Downloads\Compressed\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0.oct
6/13/2012 3:28:28 PM > Converting "BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0.dz"
6/13/2012 3:29:08 PM > Deleting directory "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\amss.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\amsshd.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\appsboot.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\appsboothd.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\boot_OPEN_EU.img"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\oemsbl.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\oemsblhd.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\partition.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\qcsbl.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\qcsblhd_cfgdata.mbn"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\recovery.img"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\splash.img"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\system.mbn_.bin"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\system_OPEN_EU.bin"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\system_OPEN_EU.mbn_0"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\system_OPEN_EU.mbn_1"...
6/13/2012 3:29:08 PM > Deleting file "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\system_OPEN_EU.mbn_2"...
6/13/2012 3:29:08 PM > Deleting directory "C:\Users\USER\AppData\Local\Temp\BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0\" OK!
6/13/2012 3:29:28 PM > --------------------------------------------------------------------------------
6/13/2012 3:29:28 PM > Platform: LG Qualcomm
6/13/2012 3:29:28 PM > Selected port: COM3
6/13/2012 3:29:28 PM > Selected model: E510
6/13/2012 3:29:28 PM > Reading info...6/13/2012 3:29:31 PM > Failed!
6/13/2012 3:29:31 PM > Could not detect mode.
6/13/2012 3:29:42 PM > --------------------------------------------------------------------------------
6/13/2012 3:29:42 PM > Platform: LG Qualcomm
6/13/2012 3:29:42 PM > Selected port: COM126
6/13/2012 3:29:42 PM > Selected model: E510
6/13/2012 3:29:42 PM > Reading info...6/13/2012 3:29:42 PM > OK
6/13/2012 3:29:42 PM > Mode: Normal
6/13/2012 3:29:42 PM > Model ID: E510
6/13/2012 3:29:42 PM > Firmware compiled date: May 25 2011
6/13/2012 3:29:42 PM > Firmware compiled time: 06:00:00
6/13/2012 3:29:42 PM > Firmware released date: Nov  4 2011
6/13/2012 3:29:42 PM > Firmware released time: 22:04:12
6/13/2012 3:29:42 PM > IMEI: 358688-04-407991-1
6/13/2012 3:29:42 PM > Bluetooth address: F0:1C:13:D5:6A:24
6/13/2012 3:29:49 PM > --------------------------------------------------------------------------------
6/13/2012 3:29:49 PM > Platform: LG Qualcomm
6/13/2012 3:29:49 PM > Selected port: COM126
6/13/2012 3:29:49 PM > Selected model: E510
6/13/2012 3:29:49 PM > Reading info...6/13/2012 3:29:49 PM > OK
6/13/2012 3:29:49 PM > Mode: Normal
6/13/2012 3:29:49 PM > Model ID: E510
6/13/2012 3:29:49 PM > Firmware compiled date: May 25 2011
6/13/2012 3:29:49 PM > Firmware compiled time: 06:00:00
6/13/2012 3:29:49 PM > Firmware released date: Nov  4 2011
6/13/2012 3:29:49 PM > Firmware released time: 22:04:12
6/13/2012 3:29:49 PM > IMEI: 358688-04-407991-1
6/13/2012 3:29:49 PM > Bluetooth address: F0:1C:13:D5:6A:24
6/13/2012 3:29:49 PM > Opening "BIN_LGE510AT-00-V10c-ESA-XX-NOV-04-2011+0.oct"...6/13/2012 3:29:49 PM > OK
6/13/2012 3:29:49 PM > Switching to Download mode...6/13/2012 3:29:52 PM > OK
6/13/2012 3:29:52 PM > Checking partition...6/13/2012 3:29:52 PM > OK
6/13/2012 3:29:52 PM > Write BootLoaders: No
6/13/2012 3:29:52 PM > Writing AMSS...6/13/2012 3:30:36 PM > OK
6/13/2012 3:30:36 PM > Writing Boot image...6/13/2012 3:30:45 PM > OK
6/13/2012 3:30:45 PM > Writing System...6/13/2012 3:39:57 PM > OK
6/13/2012 3:39:57 PM > Writing Recovery image...6/13/2012 3:40:07 PM > OK
6/13/2012 3:40:07 PM > Writing Splash image...6/13/2012 3:40:08 PM > OK
6/13/2012 3:40:08 PM > Finalizing...6/13/2012 3:40:10 PM > OK
6/13/2012 3:40:10 PM > Writing firmware done!
6/13/2012 3:40:10 PM > To finish the operation please power on phone and wait 3 minutes

Nadoui · 06-13-2012, 23:40

Welcome to Octopus Box LG Software version 2.1.1
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM7
Selected baudrate: 921600
Selected model: GT400
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359828-03-365491-5
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Unlocking...OK
Sending APP flash loader...OK
Finalizing...OK
Phone successfully unlocked!
Disconnected.

Nadoui · 06-15-2012, 00:06

Platform: LG Infineon
Selected port: COM7
Selected baudrate: 921600
Selected model: GW520
Please reconnect battery, press and hold power button...
Phone found.
Release power button.
Sending loader...OK
Reading info. Please wait...
IMEI: 353638-03-281152-3
Unlocking...
Reading security area...
Backup saved to
"GW520-353638032811523_14-06-2012_10-40-05.eep"
Writing security area...
Phone successfully unlocked!
Reading codes. Please wait...
Backup saved to
"GW520-353638032811523_14-06-2012_10-40-12.eep"
--------------------------------------------------------------------------------
NCK : 9601 1648 7211 0650
NSCK : 5148 9237 5377 0454
SPCK : 5552 7615 0092 6698
CCK : 1060 7104 8168 5382
SIM : 0656 8823 5463 0968
MCC: 208 (France)
MNC: 20
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Go to menu>Settings>Security>SIMLOCK and enter the code.

sirnavid2010 · 06-15-2012, 10:21

Welcome to Octopus Box LG Software version 2.1.3
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: A133
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: 8981
Flash type: Intel
Reading info. Please wait...
IMEI: 357028-04-618373-7
Reading codes. Please wait...
--------------------------------------------------------------------------------
NCK : 9771 3432 7953 8285
NSCK : 9041 2495 7365 2838
SPCK : 5341 2610 3405 7218
CCK : 8948 3233 1655 7455
SIM : 9162 4259 0861 3118
To finish the operation, please perform the following steps:
1. Power phone ON without SIM card and type 2945#*133#
2. Enter code.
Selecting output file...
Reading EEPROM into file "A133-357028046183737.EEP"...
Reading EEPROM done!
Opening "ROM_LGA133AT-00-V10b-IRN-XXX-OCT-09-2010+0.oct"...OK
Erasing...Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.

fredinho · 06-15-2012, 16:18

Welcome to Octopus Box LG Software version 2.1.2
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM15
Selected baudrate: 921600
Selected model: A180
Please reconnect battery...
Phone found.
Sending preloader...OK
Sending loader...OK
Reading info. Please wait...
Flash ID: F8001632
Flash type: Fidelix
IMEI: 357600-04-862691-1
Opening "A180AT-00-V10a-202-XXX-MAY-04-2011+0.oct"...OK
Erasing. Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.

jatchaminda · 06-16-2012, 06:45

Lg ku9100 unlock ok ......................

fredinho · 06-18-2012, 23:47

GW825v flashed successfully

Welcome to Octopus Box LG Software version 2.1.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM15
Selected model: GW825
Phone not detected. Please try again.
--------------------------------------------------------------------------------
To write firmware, please put phone into Emergency mode. To perform this, power phone off, disconnect cable, press and hold Space key and at the same time connect cable to phone.
Phone not detected. Please try again.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM151
Selected model: GW825
Phone model: GW825
Mode: Emergency
Opening "GW825AT-02-V10c-302-220-NOV-08-2009+3.oct"...OK
Writing Firmware...
Checking partition...OK
Writing APPS boot...OK
Writing APPS...OK
Writing DSP1...OK
Writing AMSS...OK
Writing Windows Mobile...OK
Writing Firmware done!
To finish the operation please power on phone and wait 3 minutes

fredinho · 06-18-2012, 23:49

GD570 flashed successfully

Welcome to Octopus Box LG Software version 2.1.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM5
Selected model: GD570
Please connect the phone with acceptable SIM card or Motorola test card
and select "Data service" in connection menu.
--------------------------------------------------------------------------------
Phone not detected. Please try again.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM5
Selected model: GD570
Please connect the phone with acceptable SIM card or Motorola test card
and select "Data service" in connection menu.
--------------------------------------------------------------------------------
Phone not detected. Please try again.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM188
Selected model: GD570
Please connect the phone with acceptable SIM card or Motorola test card
and select "Data service" in connection menu.
--------------------------------------------------------------------------------
Mode: Normal
Phone model: GD570
SW Version: GD570-MSM260140T-V10g-JUN-04-2010-TMO-US
IMEI: 012276-00-064459-3
Bluetooth address: 8C:54:1D

E:7B:B0
Opening "GD570AQAT-00-V10g-310-260-JUN-04-2010+0.oct"...OK
Reading NVM...OK
Saved to "GD570-012276000644593_18-06-2012_22-18-37.nvm"
Switching to Download mode...OK
Writing Firmware...
Checking partition...OK
Writing QCSBL...OK
Writing AMSS...OK
Writing EFS GANG...OK
Writing Firmware done!
--------------------------------------------------------------------------------

fredinho · 06-19-2012, 21:59

Welcome to Octopus Box LG Software version 2.1.3
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM5
Selected baudrate: 921600
Selected model: A180
Please reconnect battery...
Disconnected.
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM15
Selected baudrate: 921600
Selected model: A180
Please reconnect battery...
Phone found.
Sending preloader...OK
Sending loader...OK
Reading info. Please wait...
Flash ID: F8001632
Flash type: Fidelix
IMEI: 357600-04-876741-8
Opening "A180AT-00-V10a-202-XXX-MAY-04-2011+0.oct"...OK
Erasing. Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.

amyll · 06-20-2012, 03:14

Welcome to Octopus Box LG Software version 2.1.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM142
Selected model: KH1200
Mode: Normal
Phone model: KW120609
SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR
IMEI: 354207-01-211324-0
Bluetooth address: 00:12:56:9E:0E:B4
Firmware compiled date: Aug 14 2006
Firmware compiled time: 11:00:00
Firmware released date: Mar 26 2007
Firmware released time: 12:49:21
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM142
Selected model: KH1200
Mode: Normal
Phone model: KW120609
SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR
IMEI: 354207-01-211324-0
Bluetooth address: 00:12:56:9E:0E:B4Canceled!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM142
Selected model: KH1200
Mode: Normal
Phone model: KW120609
SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR
IMEI: 354207-01-211324-0
Bluetooth address: 00:12:56:9E:0E:B4
--------------------------------------------------------------------------------
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs. To avoid errors in
the flashing process, use a clean PC (without any installed drivers for
other Qualcomm-based devices). You should not run any other
programs or attach new devices to your computer during the flashing!

Please, follow these simple precautions to avoid damaging your
phone.
--------------------------------------------------------------------------------
Opening "KW120615_00.oct"...OK
Reading NVM...
Reading NVM done!
Backup saved to "KH1200-354207012113240_17-06-2012_15-22-
26.nvm"
Switching to Download mode...OK
Erasing EFS...OK
Writing Firmware...OK
Phone startup...OK
Writing NVM...
Writing NVM done!
Writing Firmware done!
Rebooting phone...
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM142
Selected model: KH1200
Mode: Normal
Phone model: KW120615
SW Version: KH1200-M6250D-V10l-APR-07-2009-KKR
IMEI: 354207-01-211324-0
Bluetooth address: 00:12:56:9E:0E:B4
Checking security...OK
Sending loader...OK
Switching to test mode...
Wait phone startup...OK
Searching signatures...
Signature #1...OK, not patched
Patching...
Signature #1...OK
Phone successfully unlocked!
Rebooting phone...

06-09-2012, 13:18	#1967 (permalink)
champions1 Freak Poster Join Date: Nov 2009 Location: U.K (leeds) Posts: 137 Member: 1157490 Status: Offline Sonork: 100.1638346 Thanks Meter: 74	LG-E400 successfully unlocked. just connect with usb cable turned off phone and install drivers. press unlock and wait untill all done . Platform: LG Qualcomm Selected port: COM186 Selected model: E400 Reading info...OK Mode: Normal Model ID: E400 Firmware compiled date: Nov 17 2011 Firmware compiled time: 22:00:00 Firmware released date: Mar 31 2012 Firmware released time: 01:10:16 IMEI: 351895-05-425206-7 Bluetooth address: 10:F9:6F:0B:5C:38 Switching to Download mode...OK Unlocking... To avoid damaging your phone, please, follow these simple precautions: Use a clean PC (without any installed drivers and software for BlackBerry phones, modem Dashboard software, Phone PC suites software). Please, make sure the phone's battery is fully charged. You should not run any other programs or attach new devices to your computer during this operation! Sending loader...OK Searching security area...OK Reading security area...OK Backup saved to "E400_09-06-2012_12-55-32.SEC" Analyzing security...OK IMEI: 351895-05-425206-7 Bluetooth address: 10:F9:6F:0B:5C:38 Unlocking...OK Writing security area...OK Switching to Normal mode...OK Found model E400 at port COM186 Finalizing...OK Rebooting phone...OK Phone successfully unlocked! Rebooting phone...

06-18-2012, 23:49	#1978 (permalink)
fredinho No Life Poster Join Date: Feb 2009 Location: https://jabaunlock.com/ Posts: 1,348 Member: 975275 Status: Offline Sonork: 100.1607001 Thanks Meter: 221	GD570 flashed successfully Welcome to Octopus Box LG Software version 2.1.3 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM5 Selected model: GD570 Please connect the phone with acceptable SIM card or Motorola test card and select "Data service" in connection menu. -------------------------------------------------------------------------------- Phone not detected. Please try again. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM5 Selected model: GD570 Please connect the phone with acceptable SIM card or Motorola test card and select "Data service" in connection menu. -------------------------------------------------------------------------------- Phone not detected. Please try again. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM188 Selected model: GD570 Please connect the phone with acceptable SIM card or Motorola test card and select "Data service" in connection menu. -------------------------------------------------------------------------------- Mode: Normal Phone model: GD570 SW Version: GD570-MSM260140T-V10g-JUN-04-2010-TMO-US IMEI: 012276-00-064459-3 Bluetooth address: 8C:54:1DE:7B:B0 Opening "GD570AQAT-00-V10g-310-260-JUN-04-2010+0.oct"...OK Reading NVM...OK Saved to "GD570-012276000644593_18-06-2012_22-18-37.nvm" Switching to Download mode...OK Writing Firmware... Checking partition...OK Writing QCSBL...OK Writing AMSS...OK Writing EFS GANG...OK Writing Firmware done! --------------------------------------------------------------------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlocked a2 phones	3lsheikh	SETool2	10	03-04-2011 02:48
Successfully Unlock Z240 Phone Freeze	jhepoy_org	UST Pro II	13	12-02-2009 06:03
Successfully unlock BB5 phones with bb5king	Mjabbar	BB5KING	0	11-29-2008 14:13
Successfully unlock BB5 phones with bb5king	Mjabbar	BB5KING	2	11-26-2008 11:54
PB2 - Successfully unlocked LG phones CU/KU ...	DOUHAL	PolarBox 3	72	11-05-2008 18:21

06-09-2012, 10:04	#1966 (permalink)
Nadoui No Life Poster Join Date: Jan 2010 Location: Paris Age: 48 Posts: 3,137 Member: 1202782 Status: Offline Sonork: 100.1608261 Thanks Meter: 634	Welcome to Octopus Box LG Software version 2.1.1 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM49 Selected model: KF700 Mode: Normal Phone model: KF700 SW Version: KF700-MSM6280-V10e-JUL-01-2008-XX IMEI: 353357-02-050842-7 Bluetooth address: 00:1F:6B:BF:6F:A4 Firmware compiled date: FEB 22 2008 Firmware compiled time: 09:00:00 Firmware released date: Jun 30 2008 Firmware released time: 21:09:29 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM49 Selected model: KF700 Mode: Normal Phone model: KF700 SW Version: KF700-MSM6280-V10e-JUL-01-2008-XX IMEI: 353357-02-050842-7 Bluetooth address: 00:1F:6B:BF:6F:A4 Checking security...OK Unlocking... Prepairing loader...OK Sending loader...OK Reading security area... Backup saved to "KF700-353357020508427_09-06-2012_11-00-13.sec" Erasing security area...OK Writing security area...OK Phone successfully unlocked! Rebooting phone...

06-11-2012, 23:26	#1968 (permalink)
Nadoui No Life Poster Join Date: Jan 2010 Location: Paris Age: 48 Posts: 3,137 Member: 1202782 Status: Offline Sonork: 100.1608261 Thanks Meter: 634	Platform: LG Qualcomm Selected port: COM49 Selected model: KU990 Mode: Normal Phone model: KU990 SW Version: KU990-MSM6280-V10g-AUG-12-2008-XX IMEI: 354935-02-191383-4 Bluetooth address: 00:1F:E3:CF:C6:2D Checking security...OK Unlocking... Prepairing loader...OK Sending loader...OK Reading security area...OK Backup saved to "KU990-354935021913834_11-06-2012_14-48-46.sec" Checking security... Warning: Security signs are not valid.OK Patching security...OK Writing security area...OK Phone successfully unlocked! Rebooting phone...

06-13-2012, 00:10	#1970 (permalink)
Nadoui No Life Poster Join Date: Jan 2010 Location: Paris Age: 48 Posts: 3,137 Member: 1202782 Status: Offline Sonork: 100.1608261 Thanks Meter: 634	Platform: LG Infineon Selected port: COM7 Selected baudrate: 921600 Selected model: KP501 Please reconnect battery, press and hold power button... Phone found. Release power button. Sending loader...OK Reading info. Please wait... IMEI: 357014-03-713267-7 Unlocking... Reading security area... Backup saved to "KP501-357014037132677_12-06-2012_11-13-03.eep" Writing security area... Phone successfully unlocked! Reading codes. Please wait... -------------------------------------------------------------------------------- Unlock code: 1863 1206 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*71001# 2. Go to menu>Settings>Security>SIMLOCK and enter the code.

06-13-2012, 23:40	#1972 (permalink)
Nadoui No Life Poster Join Date: Jan 2010 Location: Paris Age: 48 Posts: 3,137 Member: 1202782 Status: Offline Sonork: 100.1608261 Thanks Meter: 634	Welcome to Octopus Box LG Software version 2.1.1 -------------------------------------------------------------------------------- Platform: LG SEMC Selected port: COM7 Selected baudrate: 921600 Selected model: GT400 Use Testpoint/Jumper: No -------------------------------------------------------------------------------- For correct working the battery must be fully charged! Please, reconnect battery, press and hold volume-up button and connect USB cable. If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). Starting... Phone found! Chip ID: 0xD9000401FFFFFFFF Chipset: DB3200 BootROM mode detected Sending ACC preloader...OK Sending APP preloader...OK CID: 54 IMEI: 359828-03-365491-5 Color: Red Sending ACC production loader...OK Sending APP production loader...OK Unlocking...OK Sending APP flash loader...OK Finalizing...OK Phone successfully unlocked! Disconnected.

06-15-2012, 00:06	#1973 (permalink)
Nadoui No Life Poster Join Date: Jan 2010 Location: Paris Age: 48 Posts: 3,137 Member: 1202782 Status: Offline Sonork: 100.1608261 Thanks Meter: 634	Platform: LG Infineon Selected port: COM7 Selected baudrate: 921600 Selected model: GW520 Please reconnect battery, press and hold power button... Phone found. Release power button. Sending loader...OK Reading info. Please wait... IMEI: 353638-03-281152-3 Unlocking... Reading security area... Backup saved to "GW520-353638032811523_14-06-2012_10-40-05.eep" Writing security area... Phone successfully unlocked! Reading codes. Please wait... Backup saved to "GW520-353638032811523_14-06-2012_10-40-12.eep" -------------------------------------------------------------------------------- NCK : 9601 1648 7211 0650 NSCK : 5148 9237 5377 0454 SPCK : 5552 7615 0092 6698 CCK : 1060 7104 8168 5382 SIM : 0656 8823 5463 0968 MCC: 208 (France) MNC: 20 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*71001# 2. Go to menu>Settings>Security>SIMLOCK and enter the code.

06-15-2012, 10:21	#1974 (permalink)
sirnavid2010 No Life Poster Join Date: May 2008 Location: persian Age: 43 Posts: 3,820 Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824	Welcome to Octopus Box LG Software version 2.1.3 -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: USB Selected model: A133 Disconnect battery and connect USB cable to phone... Phone found. Sending preloader...OK Sending loader...OK Initializing flash...OK Flash ID: 8981 Flash type: Intel Reading info. Please wait... IMEI: 357028-04-618373-7 Reading codes. Please wait... -------------------------------------------------------------------------------- NCK : 9771 3432 7953 8285 NSCK : 9041 2495 7365 2838 SPCK : 5341 2610 3405 7218 CCK : 8948 3233 1655 7455 SIM : 9162 4259 0861 3118 To finish the operation, please perform the following steps: 1. Power phone ON without SIM card and type 2945#*133# 2. Enter code. Selecting output file... Reading EEPROM into file "A133-357028046183737.EEP"... Reading EEPROM done! Opening "ROM_LGA133AT-00-V10b-IRN-XXX-OCT-09-2010+0.oct"...OK Erasing...Please wait...OK Writing Firmware...OK Writing Firmware done! Disconnected.

06-15-2012, 16:18	#1975 (permalink)
fredinho No Life Poster Join Date: Feb 2009 Location: https://jabaunlock.com/ Posts: 1,348 Member: 975275 Status: Offline Sonork: 100.1607001 Thanks Meter: 221	Welcome to Octopus Box LG Software version 2.1.2 -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM15 Selected baudrate: 921600 Selected model: A180 Please reconnect battery... Phone found. Sending preloader...OK Sending loader...OK Reading info. Please wait... Flash ID: F8001632 Flash type: Fidelix IMEI: 357600-04-862691-1 Opening "A180AT-00-V10a-202-XXX-MAY-04-2011+0.oct"...OK Erasing. Please wait...OK Writing Firmware...OK Writing Firmware done! Disconnected.

06-18-2012, 23:47	#1977 (permalink)
fredinho No Life Poster Join Date: Feb 2009 Location: https://jabaunlock.com/ Posts: 1,348 Member: 975275 Status: Offline Sonork: 100.1607001 Thanks Meter: 221	GW825v flashed successfully Welcome to Octopus Box LG Software version 2.1.3 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM15 Selected model: GW825 Phone not detected. Please try again. -------------------------------------------------------------------------------- To write firmware, please put phone into Emergency mode. To perform this, power phone off, disconnect cable, press and hold Space key and at the same time connect cable to phone. Phone not detected. Please try again. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM151 Selected model: GW825 Phone model: GW825 Mode: Emergency Opening "GW825AT-02-V10c-302-220-NOV-08-2009+3.oct"...OK Writing Firmware... Checking partition...OK Writing APPS boot...OK Writing APPS...OK Writing DSP1...OK Writing AMSS...OK Writing Windows Mobile...OK Writing Firmware done! To finish the operation please power on phone and wait 3 minutes

06-19-2012, 21:59	#1979 (permalink)
fredinho No Life Poster Join Date: Feb 2009 Location: https://jabaunlock.com/ Posts: 1,348 Member: 975275 Status: Offline Sonork: 100.1607001 Thanks Meter: 221	Welcome to Octopus Box LG Software version 2.1.3 -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM5 Selected baudrate: 921600 Selected model: A180 Please reconnect battery... Disconnected. -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM15 Selected baudrate: 921600 Selected model: A180 Please reconnect battery... Phone found. Sending preloader...OK Sending loader...OK Reading info. Please wait... Flash ID: F8001632 Flash type: Fidelix IMEI: 357600-04-876741-8 Opening "A180AT-00-V10a-202-XXX-MAY-04-2011+0.oct"...OK Erasing. Please wait...OK Writing Firmware...OK Writing Firmware done! Disconnected.

06-20-2012, 03:14	#1980 (permalink)
amyll No Life Poster Join Date: May 2007 Location: Islamic city of Marawi Posts: 620 Member: 502507 Status: Offline Sonork: 100.1648947 Thanks Meter: 154	Welcome to Octopus Box LG Software version 2.1.3 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM142 Selected model: KH1200 Mode: Normal Phone model: KW120609 SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR IMEI: 354207-01-211324-0 Bluetooth address: 00:12:56:9E:0E:B4 Firmware compiled date: Aug 14 2006 Firmware compiled time: 11:00:00 Firmware released date: Mar 26 2007 Firmware released time: 12:49:21 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM142 Selected model: KH1200 Mode: Normal Phone model: KW120609 SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR IMEI: 354207-01-211324-0 Bluetooth address: 00:12:56:9E:0E:B4Canceled! -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM142 Selected model: KH1200 Mode: Normal Phone model: KW120609 SW Version: KH1200-M6250D-V10f-MAR-26-2007-KKR IMEI: 354207-01-211324-0 Bluetooth address: 00:12:56:9E:0E:B4 -------------------------------------------------------------------------------- Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. -------------------------------------------------------------------------------- Opening "KW120615_00.oct"...OK Reading NVM... Reading NVM done! Backup saved to "KH1200-354207012113240_17-06-2012_15-22- 26.nvm" Switching to Download mode...OK Erasing EFS...OK Writing Firmware...OK Phone startup...OK Writing NVM... Writing NVM done! Writing Firmware done! Rebooting phone... -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM142 Selected model: KH1200 Mode: Normal Phone model: KW120615 SW Version: KH1200-M6250D-V10l-APR-07-2009-KKR IMEI: 354207-01-211324-0 Bluetooth address: 00:12:56:9E:0E:B4 Checking security...OK Sending loader...OK Switching to test mode... Wait phone startup...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone...