GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octopus LG/Octoplus LG

Reply
 
LinkBack Thread Tools Display Modes
Old 12-02-2018, 17:58   #5776 (permalink)
No Life Poster
 
anrmobile's Avatar
 
Join Date: Oct 2011
Location: online
Posts: 793
Member: 1680232
Status: Offline
Sonork: 100.1611221
Thanks Meter: 193
LS993 unlock successfully done


Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-ZVA-SPR-US-DEC-26-2017+00
Kernel version: 3.18.31-perf-gd7d6855-00004-g8f3c1e9 ([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Dec 26 11:43:29 KST 201
Android version: 7.0
Hardware: Qualcomm Technologies, Inc MSM8996pro AArch64 Processor rev 1 (aarch64)
Please, select Unlock Method!
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.

Last edited by Octopus box; 12-03-2018 at 04:58.
  Reply With Quote
The Following User Says Thank You to anrmobile For This Useful Post:
Old 12-02-2018, 21:17   #5777 (permalink)
No Life Poster
 
Gambitv01's Avatar
 
Join Date: Dec 2010
Location: Romania
Posts: 1,515
Member: 1475064
Status: Offline
Thanks Meter: 345
Donate money to this user
LMX210CM and LMX210APM successfully unlocked

Checking data...OK
Platform: LG Qualcomm
Selected port: COM637
Selected model: LMX210CM
Reading info...
Model ID: LM-X210CM
IMEI: 354376-09-518638-9
Android version: 7.1.2
Battery level: 50%
SW Version: X210CM10h
Mode: Normal
Firmware compiled date: Jun 20 2018
Firmware compiled time: 06:00:00
Firmware released date: Jul 5 2018
Firmware released time: 20:00:53
SW Version: MPSS.JO.3.0.c12-00013-8937_GENNS_PACK-1
IMEI: 354376-09-518638-9
Bluetooth address: 00:57:C1:2E:A9:E6
Wi-Fi MAC address: 00:57:C17:6F:A7
SPC: 000000
Unlocking...
Initializing ADB...OK
Waiting for phone...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Gambitv01
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 110 credits.
To perform "Unlock" operation you need to have 50 credits.
Write security backup function doesn't work for this device with latest
firmware versions. If you'll encounter any problem during Unlock operation
- you won't be able to restore the phone to it's initial state, so proceed at
your own risk.

Continue?
Skip Read/Write QCN
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "LMX210CM_354376095186389_02-12-2018_14-28-
31.SEC"
Writing security area...OK
Switching to Normal mode...
Found model LMX210CM* h at port COM637
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Gambitv01
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Finalizing...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM641
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-182749-6
Android version: 7.1.2
Battery level: 2%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun 4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-182749-6
Bluetooth address: 00:57:C1:18B:EC
Wi-Fi MAC address: 00:57:C1:C1:23:BF
SPC: 000000
Unlocking...
Initializing ADB...OK
Waiting for phone...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Gambitv01
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 60 credits.
To perform "Unlock" operation you need to have 50 credits.
Write security backup function doesn't work for this device with latest
firmware versions. If you'll encounter any problem during Unlock operation
- you won't be able to restore the phone to it's initial state, so proceed at
your own risk.

Continue?
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "LMX210APM_353934091827496_02-12-2018_14-48-
09.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "LMX210APM_353934091827496_02-12-2018_14-54-
37.SEC"
Writing security area...OK
Switching to Normal mode...
Found model LMX210AP* h at port COM641
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: Gambitv01
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Finalizing...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.

Last edited by Octopus box; 12-03-2018 at 05:05.
  Reply With Quote
The Following User Says Thank You to Gambitv01 For This Useful Post:
Old 12-03-2018, 08:43   #5778 (permalink)
Freak Poster
 
Join Date: Feb 2014
Posts: 402
Member: 2131081
Status: Offline
Sonork: 76543322223
Thanks Meter: 36
Thumbs up VS501 "Write Firmware" successfully done

lg vs 501 flash successful


Quote:
IMEI: 355275-08-869123-2
Target operator: VZW
Hardware: rev_10
Opening "VS50118A_01_0718.kdz"...OK
Firmware version: VS50118A_01_ARB00
Firmware model: VS501
Firmware type: 0100
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing 1/78 PrimaryGPT_0.bin...OK
Writing 2/78 modem_16384.bin...OK
Writing 3/78 aboot_196608.bin...OK
Writing 4/78 abootbak_200704.bin...OK
Writing 5/78 tz_204800.bin...OK
Writing 6/78 tzbak_208896.bin...OK
Writing 7/78 sbl1_212992.bin...OK
Writing 8/78 sbl1bak_215040.bin...OK
Writing 9/78 rpm_217088.bin...OK
Writing 10/78 rpmbak_218112.bin...OK
Writing 11/78 devcfg_219136.bin...OK
Writing 12/78 devcfgbak_220160.bin...OK
Writing 13/78 cmnlib_221184.bin...OK
Writing 14/78 cmnlibbak_222208.bin...OK
Writing 15/78 cmnlib64_223232.bin...OK
Writing 16/78 cmnlib64bak_224256.bin...OK
Writing 17/78 keymaster_225280.bin...OK
Writing 18/78 keymasterbak_226304.bin...OK
Writing 19/78 dsp_278528.bin...OK
Writing 20/78 sec_397312.bin...OK
Writing 22/78 apdp_402432.bin...OK
Writing 23/78 msadp_403456.bin...OK
Writing 24/78 boot_409600.bin...OK
Writing 25/78 laf_475136.bin...OK
Writing 26/78 lafbak_540672.bin...OK
Writing 27/78 recovery_606208.bin...OK
Writing 28/78 recoverybak_671744.bin...OK
Writing 29/78 factory_737280.bin...OK
Writing 30/78 raw_resources_851968.bin...OK
Writing 31/78 raw_resourcesbak_860160.bin...OK
Writing 32/78 persist_868352.bin...OK
Writing 33/78 system_999424.bin...OK
Writing 34/78 system_1263752.bin...OK
Writing 35/78 system_1267776.bin...OK
Writing 36/78 system_1527736.bin...OK
Writing 37/78 system_1785856.bin...OK
Writing 38/78 system_1788040.bin...OK
Writing 39/78 system_1792064.bin...OK
Writing 40/78 system_2052024.bin...OK
Writing 41/78 system_2310144.bin...OK
Writing 42/78 system_2312328.bin...OK
Writing 43/78 system_2316352.bin...OK
Writing 44/78 system_2576312.bin...OK
Writing 45/78 system_2836616.bin...OK
Writing 46/78 system_2840640.bin...OK
Writing 47/78 system_3100600.bin...OK
Writing 48/78 system_3360904.bin...OK
Writing 49/78 system_3364928.bin...OK
Writing 50/78 system_3624888.bin...OK
Writing 51/78 system_3883008.bin...OK
Writing 52/78 system_3887032.bin...OK
Writing 53/78 system_4145152.bin...OK
Writing 54/78 system_4149176.bin...OK
Writing 55/78 system_4411320.bin...OK
Writing 56/78 system_4673464.bin...OK
Writing 57/78 system_4935608.bin...OK
Writing 58/78 system_5197752.bin...OK
Writing 59/78 system_5459896.bin...OK
Writing 60/78 system_5722040.bin...OK
Writing 61/78 system_5984184.bin...OK
Writing 62/78 system_6246328.bin...OK
Writing 63/78 system_6508472.bin...OK
Writing 64/78 system_6770616.bin...OK
Writing 65/78 system_7032760.bin...OK
Writing 66/78 system_7294904.bin...OK
Writing 67/78 system_7555208.bin...OK
Writing 68/78 system_7559232.bin...OK
Writing 69/78 system_7819192.bin...OK
Writing 70/78 system_8079496.bin...OK
Writing 71/78 system_8083520.bin...OK
Writing 72/78 system_8343480.bin...OK
Writing 73/78 system_8605624.bin...OK
Writing 74/78 system_8867768.bin...OK
Writing 75/78 system_9129912.bin...OK
Writing 76/78 system_9392056.bin...OK
Writing 77/78 system_9653248.bin...OK
Writing 78/78 BackupGPT_15236096.bin...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.9 Software version.

Last edited by Octopus box; 12-03-2018 at 08:51.
  Reply With Quote
The Following User Says Thank You to austin0 For This Useful Post:
Old 12-03-2018, 14:49   #5779 (permalink)
Freak Poster
 
Join Date: May 2008
Location: LAGOS NIGERIA
Posts: 375
Member: 773516
Status: Offline
Sonork: 100.1583311
Thanks Meter: 69
Smile lmx210apm unlock successful

Code:
Welcome to Octoplus/Octopus Box LG Software version 2.8.9.91
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM76
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LMX210APMAT-01-V10c-310-410-JUN-04-2018-ARB01+0
Android version: 7.1.2
LAF Version: 1.1
Product ID: VS01S180727006734
IMEI: 353934-09-093179-4
Target operator: ATT
Hardware: rev_10
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM76
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LMX210APMAT-01-V10c-310-410-JUN-04-2018-ARB01+0
Android version: 7.1.2
LAF Version: 1.1
Product ID: VS01S180727006734
IMEI: 353934-09-093179-4
Target operator: ATT
Hardware: rev_10
Unlocking...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in 
PC Device Manager.
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun  4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-093179-4
Bluetooth address: 08:D4:6A:9B:8D:14
Wi-Fi MAC address: 00:57:C1:9F:9A:E8
SPC: 000000
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun  4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-093179-4
Bluetooth address: 08:D4:6A:9B:8D:14
Wi-Fi MAC address: 00:57:C1:9F:9A:E8
SPC: 000000
Unlocking...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in 
PC Device Manager.
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: bolutic
Authorizing...OK
Checking balance...OK
Your balance: 50 credits.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210EM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210EM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210EM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210EM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210EM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM13
Selected model: LMX210APM
Reading info...Failed!
Port busy
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun  4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-093179-4
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
SPC: 000000
Unlocking...
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in 
PC Device Manager.OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: bolutic
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 50 credits.
To perform "Unlock" operation you need to have 50 credits.
Write security backup function doesn't work for this device with latest 
firmware versions. If you'll encounter any problem during Unlock operation 
- you won't be able to restore the phone to it's initial state, so proceed at 
your own risk.

Continue?
Skip Read/Write QCN
Switching to Download mode...Failed!
Please perform the following steps:
1. Disconnect cable
2. Put phone into download mode manually (Power phone OFF (reconnect 
battery), press and hold "Vol+" button and connect the cable (or P999 
cable))
3. Connect cable and press "Ok" button.
Initializing flash...
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun  4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-093179-4
Bluetooth address: 08:D4:6A:9B:8D:14
Wi-Fi MAC address: 00:57:C1:9F:9A:E8
SPC: 000000
Unlocking...
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in 
PC Device Manager.
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM74
Selected model: LMX210APM
Reading info...
Model ID: LM-X210APMX210APM10c
IMEI: 353934-09-093179-4
Android version: 7.1.2
Battery level: 100%
SW Version: X210APM10c
Mode: Normal
Firmware compiled date: Dec 21 2017
Firmware compiled time: 05:00:00
Firmware released date: Jun  4 2018
Firmware released time: 18:54:00
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 353934-09-093179-4
Bluetooth address: 08:D4:6A:9B:8D:14
Wi-Fi MAC address: 00:57:C1:9F:9A:E8
SPC: 000000
Unlocking...
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in 
PC Device Manager.OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: bolutic
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 50 credits.
To perform "Unlock" operation you need to have 50 credits.
Write security backup function doesn't work for this device with latest 
firmware versions. If you'll encounter any problem during Unlock operation 
- you won't be able to restore the phone to it's initial state, so proceed at 
your own risk.

Continue?
Skip Read/Write QCN
Switching to Download mode...Failed!
Please perform the following steps:
1. Disconnect cable
2. Put phone into download mode manually (Power phone OFF (reconnect 
battery), press and hold "Vol+" button and connect the cable (or P999 
cable))
3. Connect cable and press "Ok" button.
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "LMX210APM_353934090931794_03-12-2018_15-37-
19.SEC"
Writing security area...OK
Switching to Normal mode...
Found model LMX210AP*    h at port COM74
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: bolutic
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Finalizing...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.9.91 Software version.
  Reply With Quote
The Following User Says Thank You to bolutic For This Useful Post:
Old 12-03-2018, 19:49   #5780 (permalink)
No Life Poster
 
anrmobile's Avatar
 
Join Date: Oct 2011
Location: online
Posts: 793
Member: 1680232
Status: Offline
Sonork: 100.1611221
Thanks Meter: 193
H901 Write Firmware successfully done

Code:
Opening "H90130c_00_0914.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing pmic...OK
Writing sbl1...OK
Writing tz...OK
Writing sdi...OK
Writing hyp...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing pmicbak...OK
Writing hypbak...OK
Writing tzbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing sdibak...OK
Writing persist...OK
Writing sec...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing factory...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.0 Software version.

Last edited by Octopus box; 12-04-2018 at 04:51.
  Reply With Quote
The Following User Says Thank You to anrmobile For This Useful Post:
Old 12-04-2018, 08:47   #5781 (permalink)
Freak Poster
 
Join Date: Jan 2004
Location: india
Age: 55
Posts: 114
Member: 49062
Status: Offline
Thanks Meter: 52
Thumbs up H830 Reset FRP successfully done

LG G5 H830 Frp done in minutes


Last edited by Octopus box; 12-04-2018 at 09:13.
  Reply With Quote
The Following User Says Thank You to nazeer For This Useful Post:
Old 12-04-2018, 11:16   #5782 (permalink)
No Life Poster
 
Join Date: Feb 2016
Location: GREAT Country Pakistan
Posts: 1,820
Member: 2537939
Status: Offline
Sonork: 100.1670350
Thanks Meter: 682
Thumbs up LS755 unlocked done

Welcome to Octoplus/Octopus Box LG Software version 2.8.9.8
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: LS755
Selected USB connection type
Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)
Phone found at port COM24
Mode: Emergency
Initializing flash...OK
Model ID: LGLS755
Platform: mt6755
Android version: 6.0.1
SW version: LS755ZVA_03
LAF Version: 1.1
Product ID: CD23S170720003738
IMEI: 359820-08-147278-7
Target operator: SPR
Hardware: rev_11
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359820-*******-7
MEID: 359820-*******8
Bluetooth address: 88:36:5F:50:89:98
Wi-Fi MAC address: 88:36:5F1B:88
SPC: 533476
--------------------------------------------------------------------------------
Detecting writing method...OK
Reading Carrier...OK
Unlocking...OK
Writing Carrier...OK
Phone successfully unlocked!
Performed by 2.8.9.8 Software version.

Last edited by Octopus box; 12-04-2018 at 11:21.
  Reply With Quote
The Following User Says Thank You to lerner_ For This Useful Post:
Old 12-04-2018, 11:38   #5783 (permalink)
Freak Poster
 
shaikh_shoeb50's Avatar
 
Join Date: May 2011
Location: ..:Inside UR Brain:..
Age: 30
Posts: 435
Member: 1586370
Status: Offline
Sonork: 100.1618206
Thanks Meter: 125
Successfully Unlocked TMB LM-X212TA Aristo 2 Plus

Successfully Unlocked TMB LM-X212TA Aristo 2 Plus Via Server

Quote:
Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: *********
Authorizing...OK
Checking balance...OK
Your balance: 150 credits.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM20
Selected model: LMX212TA
Reading info...
Model ID: LM-X212TA
IMEI: 356351-09-124942-2
Android version: 7.1.2
Battery level: 31%
SW Version: X212TA10k
Trying to enable Diagnostics ports...
Found model LMX212TA:h at port COM20
Checking root access...
Initializing ADB...OK
Waiting for phone...OK
Phone is already rooted.
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: *********
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 150 credits.
To perform "Unlock" operation you need to have 100 credits.
Sending exploit...OK
Executing exploit...OK
Sending data to server...OK
Calculating. Please Wait...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.



Thanks Octopus Team...

Last edited by Octopus box; 12-04-2018 at 13:29.
  Reply With Quote
The Following User Says Thank You to shaikh_shoeb50 For This Useful Post:
Old 12-05-2018, 09:47   #5784 (permalink)
No Life Poster
 
Unlocker AL's Avatar
 
Join Date: Mar 2001
Location: ALBANIA(Tirana)
Age: 47
Posts: 5,053
Member: 3617
Status: Offline
Thanks Meter: 482
Flashing and downgraden ok LG M160 by Octpus

Flashing and downgraden ok LG M160
Attached Images
File Type: png m160.png (120.7 KB, 2 views)
  Reply With Quote
The Following User Says Thank You to Unlocker AL For This Useful Post:
Old 12-05-2018, 11:03   #5785 (permalink)
No Life Poster
 
deeptelecomzira's Avatar
 
Join Date: Jul 2014
Location: INDIA
Age: 24
Posts: 2,227
Member: 2218251
Status: Offline
Thanks Meter: 1,070
Arrow Lg gs101 direct unlock done by octopus box

LG GS101 DIRECT UNLOCK DONE BY OCTOPUS BOX



BR
iUnlockingStore
  Reply With Quote
The Following User Says Thank You to deeptelecomzira For This Useful Post:
Old 12-05-2018, 12:52   #5786 (permalink)
Freak Poster
 
Join Date: Nov 2017
Posts: 194
Member: 2776492
Status: Offline
Thanks Meter: 42
Thumbs up LS755 no APN done with Great Octoplus LG Software

Welcome to Octoplus/Octopus Box LG Software version 2.8.9.91
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 0
Selected model: LS755
Selected USB connection type
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS755
Model ID: LGLS755
Hardware: MT6755M ARMv7 Processor rev 2 (v7l)
Phone firmware version: LS755ZVF
Baseband version:
MOLY.LR11.W1552.MD.TC01.PH1K6PNA.SP.W16.28.LTE.P1. P10.T31,
2018/08/06 10:52
Kernel version: 3.18.22 ([email protected]) (gcc version 4.8 (GCC) )
#1 SMP PREEMPT Mon Aug 6 11:01:12 KST 201
Android version: 6.0.1
Disable Hands Free Activation operation is currently not supported for your
phone's firmware.
Performed by 2.8.9.91 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: LS755
Selected USB connection type
Power phone OFF (reconnect battery), press and hold "Vol+" button and
connect the cable (or P999 cable)
Phone found at port COM45
Mode: Emergency
Initializing flash...OK
Model ID: LGLS755
Platform: mt6755
Android version: 6.0.1
SW version: LS755ZVF_02
LAF Version: 1.1
Product ID: CT01S170612004111
IMEI: 359820-08-027360-8
Target operator: SPR
Hardware: rev_11
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359820-08-027360-8
MEID: 359820-08-027360
Bluetooth address: 88:36:5F:00:EB:62
Wi-Fi MAC address: 04:1B:6D:F1:9F:36
SPC: 101385
--------------------------------------------------------------------------------
Detecting writing method...OK
Reading Carrier...OK
Unlocking...OK
Writing Carrier...OK
Phone successfully unlocked!
Performed by 2.8.9.91 Software version.


phone was unable to add apn ,,,,now ok,,,thanks octoplus

Last edited by Octopus box; 12-05-2018 at 13:02.
  Reply With Quote
The Following User Says Thank You to charsaddagsm For This Useful Post:
Old 12-05-2018, 22:59   #5787 (permalink)
No Life Poster
 
ThePhoneTechDoc's Avatar
 
Join Date: Jan 2017
Location: Jamaica
Posts: 528
Member: 2673816
Status: Online
Thanks Meter: 452
Smile K550 "Unlock" successfully done

Welcome to Octoplus/Octopus Box LG Software version 2.8.9.8
Checking data...OK
Platform: LG Qualcomm
Selected port: COM918
Selected model: K550
Reading info...
Model ID: LG-K550
IMEI: 358XX9-07-XX17XX-9
Android version: 6.0.1
Battery level: 15%
SW Version: K55010r
Mode: Normal
Firmware compiled date: May 18 2016
Firmware compiled time: 02:00:00
Firmware released date: Mar 18 2017
Firmware released time: 14:13:22
SW Version: MPSS.JO.1.2.c2.1-00013-8937_GENNS_PACK-
1.56217.3.56578.1
IMEI: 358XX9-07-XX17XX-9
SPC: 000000
Checking root access...
Initializing ADB...OK
Waiting for phone...OK
Phone is already rooted.
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: the.phone.tech.doc
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Sending exploit...OK
Executing exploit...OK
Sending data to server...OK
Calculating. Please Wait...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.9.8 Software version.

Last edited by Octopus box; 12-06-2018 at 04:56.
  Reply With Quote
The Following User Says Thank You to ThePhoneTechDoc For This Useful Post:
Old 12-06-2018, 08:18   #5788 (permalink)
No Life Poster
 
Join Date: Jul 2014
Location: Nowshera imeipk
Posts: 861
Member: 2217500
Status: Offline
Sonork: 100.1597179
Thanks Meter: 311
Smile LGM320AT Reset FRP successfully done

Welcome to Octoplus/Octopus Box LG Software version 2.8.9
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS775
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM40
Selected model: LS775
Reading info...
IMEI:
Android version:
Battery level: 50%
SW Version: M32010f
Mode: Emergency
Initializing flash...OK
Platform: mt6750
SW version: LGM320AT-00-V10f-AME-XX-SEP-04-2018+0
Android version: 7.0
LAF Version: 1.1
Product ID: CT01S170619004318
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM40
Selected model: LS775
Please, put the phone into download mode manually (Power phone OFF
(reconnect battery), press and hold "Vol+" button and connect the cable
(or P999 cable)).
Reading info...
IMEI:
Android version:
Battery level: 50%
SW Version: M32010f
Mode: Emergency
Initializing flash...OK
Platform: mt6750
SW version: LGM320AT-00-V10f-AME-XX-SEP-04-2018+0
Android version: 7.0
LAF Version: 1.1
Product ID: CT01S170619004318
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Resetting Screen Lock...OK
Resetting screen lock successfully completed!
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS775
Please, put the phone into download mode manually (Power phone OFF
(reconnect battery), press and hold "Vol+" button and connect the cable
(or P999 cable)).
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.8.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM38
Selected baudrate: 0
Selected model: M320
Selected USB connection type
Power phone OFF, press and hold "Vol+" button and connect the cable
Phone found at port COM38
Mode: Emergency
Initializing flash...OK
Model ID: LG-M320
Platform: mt6750
Android version: 7.0
SW version: LGM320AT-00-V10f-AME-XX-SEP-04-2018+0
LAF Version: 1.1
Product ID: CT01S170619004318
IMEI:
Target operator: GLOBAL
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI A: 357569-08-119675-3
IMEI B: 357569-08-119676-1
Bluetooth address: 88:36:5F:0E:31:B8
Wi-Fi MAC address: 04:1B:6D:FD:F3:BD
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reset FRP operation for M320 will delete all user data on the phone
(contacts, pictures and others)!
Do You want to continue?
Resetting FRP Lock...
Writing loader...OK
Writing userdata...OK
Formating encrypt...OK
Restoring loader...OK
Resetting FRP lock successfully completed!
Rebooting phone...
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).
Performed by 2.8.9 Software version.

Last edited by Octopus box; 12-06-2018 at 08:36.
  Reply With Quote
The Following User Says Thank You to ximasim For This Useful Post:
Old 12-07-2018, 16:58   #5789 (permalink)
No Life Poster
 
chipscell25's Avatar
 
Join Date: Mar 2011
Location: dominican republic
Age: 41
Posts: 1,913
Member: 1537078
Status: Offline
Sonork: celular center
Thanks Meter: 491
LS992 Unlock successfully done

Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS992
Reading info...Failed!
Port busy
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...OK
Model ID: LGLS992
Phone firmware version: LGLS992AT-00-ZVF-SPR-US-FEB-01-2018+00
Kernel version: 3.18.31-perf-gc6c4459-00014-g0e7b500
([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #
1 SMP PREEMPT Thu Feb 1 10:09:39 KST 201
Android version: 7.0
Hardware: Qualcomm Technologies, Inc MSM8996 AArch64 Processor rev
2 (aarch64)
Please, select Unlock Method!
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS992
Reading info...Failed!
Port busy
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...OK
Model ID: LGLS992
Phone firmware version: LGLS992AT-00-ZVF-SPR-US-FEB-01-2018+00
Kernel version: 3.18.31-perf-gc6c4459-00014-g0e7b500
([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #
1 SMP PREEMPT Thu Feb 1 10:09:39 KST 201
Android version: 7.0
Hardware: Qualcomm Technologies, Inc MSM8996 AArch64 Processor rev
2 (aarch64)
Please, select Unlock Method!
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: chipscell25
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Too low balance to provide the security operation!
Your balance: 0 credits.
To perform "Unlock" operation you need to have 50 credits.
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: kqb7p3w
Authorizing...OK
Checking balance...OK
Your balance: 200 credits.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS992
Reading info...Failed!
Port busy
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...OK
Model ID: LGLS992
Phone firmware version: LGLS992AT-00-ZVF-SPR-US-FEB-01-2018+00
Kernel version: 3.18.31-perf-gc6c4459-00014-g0e7b500
([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #
1 SMP PREEMPT Thu Feb 1 10:09:39 KST 201
Android version: 7.0
Hardware: Qualcomm Technologies, Inc MSM8996 AArch64 Processor rev
2 (aarch64)
Please, select Unlock Method!
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: kqb7p3w
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 200 credits.
To perform "Unlock" operation you need to have 50 credits.
Sending device information...OK
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.

Last edited by Octopus box; 12-08-2018 at 08:04.
  Reply With Quote
The Following User Says Thank You to chipscell25 For This Useful Post:
Old 12-08-2018, 10:45   #5790 (permalink)
No Life Poster
 
nyakam's Avatar
 
Join Date: Apr 2006
Location: cameroon
Posts: 833
Member: 260658
Status: Offline
Thanks Meter: 179
M150 unlock successfully done

LG M150 unlock successfully done:

Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM354
Selected model: M150
Reading info...
Model ID: LG-M150
IMEI: 353712-09-771423-5
Android version: 7.0
Battery level: 84%
SW Version: M15020m
Mode: Normal
Firmware compiled date: Jul 06 2017
Firmware compiled time: 04:00:00
Firmware released date: Apr 10 2018
Firmware released time: 21:10:59
SW Version: MPSS.JO.2.0.c1.2-00020-8909_GEN_PACK-
1.92496.1.104247.1
IMEI: 353712-09-771423-5
Bluetooth address: B4:F7:A1:29:1B:24
Wi-Fi MAC address: B4:F7:A11:F4:7A
SPC: 000000
Unlocking...
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM354
Selected model: M150
Reading info...
Model ID: LG-M150
IMEI: 353712-09-771423-5
Android version: 7.0
Battery level: 84%
SW Version: M15020m
Mode: Normal
Firmware compiled date: Jul 06 2017
Firmware compiled time: 04:00:00
Firmware released date: Apr 10 2018
Firmware released time: 21:10:59
SW Version: MPSS.JO.2.0.c1.2-00020-8909_GEN_PACK-
1.92496.1.104247.1
IMEI: 353712-09-771423-5
Bluetooth address: B4:F7:A1:29:1B:24
Wi-Fi MAC address: B4:F7:A11:F4:7A
SPC: 000000
Unlocking...
Initializing ADB...OK
Waiting for phone...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: xxxxxxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 250 credits.
To perform "Unlock" operation you need to have 50 credits.
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M150_353712097714235_08-12-2018_10-58-23.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "M150_353712097714235_08-12-2018_11-08-48.SEC"
Writing security area...OK
Switching to Normal mode...
Found model LGM150AT* h ` at port COM354
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: nyakamxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Finalizing...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.0 Software version.

Last edited by Octopus box; 12-09-2018 at 09:55.
  Reply With Quote
The Following User Says Thank You to nyakam For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Post here successfully unlocked a2 phones 3lsheikh SETool2 10 03-04-2011 01:48
Successfully Unlock Z240 Phone Freeze jhepoy_org UST Pro II 13 12-02-2009 05:03
Successfully unlock BB5 phones with bb5king Mjabbar BB5KING 0 11-29-2008 13:13
Successfully unlock BB5 phones with bb5king Mjabbar BB5KING 2 11-26-2008 10:54
PB2 - Successfully unlocked LG phones CU/KU ... DOUHAL PolarBox 3 72 11-05-2008 17:21

 



All times are GMT +1. The time now is 00:43.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.76504 seconds with 9 queries

SEO by vBSEO