x525baw stuck on logo after repair [Answered]

[bananin]

phone stick on logo after repair cant be finished

--------------------------------------------------------------------------------
Connecting to server ...OK
Username: 4ykv4u6
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM111
Selected baudrate: 0
Selected model: X525BAW
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable 
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and 
connect USB cable.Canceled!
Performed by 3.0.2 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM111
Selected baudrate: 0
Selected model: X525BAW
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable 
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and 
connect USB cable.
Phone found at port COM38
Mode: Emergency
Initializing flash...OK
Model ID: LM-X525BAW
Platform: mt6765
Android version: 9
SW version: LMX525BAWAT-00-V10d-SCA-XXX-DEC-16-2019+0
LAF Version: 1.1
Product ID: 96RWAN69BJ6U013L2
IMEI: 355496-10-xxxxx-8
Target operator: LAO
Hardware: rev_10
Battery level: 15%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 355496-10-xxxxx-8
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with 
latest firmware versions. If you'll encounter any problem during 
Repair IMEI operation - you won't be able to restore the phone to 
it's initial state, so proceed at your own risk.

Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: 4ykv4u6
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Repair IMEI" operation you need to have 100 credits.
Fixing IMEI...
New IMEI A: x
New IMEI B: x
Patching security...
Writing security area...OK
Removing write protection...OK
Reconnecting phone...
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" 
buttons.
3. Hold "Vol+" until phone enter in Download mode, then press 
"OK" button.
Phone found at port COM38
Mode: Emergency
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Reconnecting phone...
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" 
buttons.
3. Hold "Vol+" until phone enter in Download mode, then press 
"OK" button.
Phone found at port COM38
Mode: Emergency
Initializing flash...OK
Restore write protection...OK
Erasing part 2...
Reconnecting phone...
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" 
buttons.
3. Hold "Vol+" until phone enter in Download mode, then press 
"OK" button.Failed!
Could not detect mode.
Warning: If your device were stuck at logo, after operation was 
completed, then please, don't reflash your device, first contact with 
Support via Skype or create thread at forum!
Performed by 3.0.2 Software version.
--------------------------------------------------------------------------------
Connecting to server ...OK
Username: 4ykv4u6
Authorizing...OK
Checking balance...OK
Your balance: 0 credits.

[Octopus box]

Hello.

We've added You one more attempt, please repeat operation once again and post here full Software log