samsung b239 & other cdma model no incoming & outgoing very big problem - GSM-Forum

nakshatra · 11-01-2009, 04:52

Hi to all

Now these days , we observe , very frequently coming

incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc.

If any one have this soloution for it plz post here.

what we have tried is :-

1. full flash
2. rebuild
3. nam change

but no soloution

except PA change (we got success after change pa).

but PA availability in the market is very rare.

so we need any other solution.

thanks in advance.

pallumobile · 11-01-2009, 11:21

Quote:

Originally Posted by nakshatra

Hi to all

Now these days , we observe , very frequently coming

incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc.

If any one have this soloution for it plz post here.

what we have tried is :-

1. full flash
2. rebuild
3. nam change

but no soloution

except PA change (we got success after change pa).

but PA availability in the market is very rare.

so we need any other solution.

thanks in advance.

U r right bro. I also got the same problem many times before but fail to solve them. I also done all the available trick e.g. flash with the og file, full rebuild, write the mmc file for nam settings but the same condition. Need the working solution for this model.

m k singh · 01-09-2010, 06:31

u also lg 3500 pa use dear.

mehuldedhia · 01-24-2010, 16:17

Quote:

Originally Posted by nakshatra

Hi to all

Now these days , we observe , very frequently coming

incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc.

If any one have this soloution for it plz post here.

what we have tried is :-

1. full flash
2. rebuild
3. nam change

but no soloution

except PA change (we got success after change pa).

but PA availability in the market is very rare.

so we need any other solution.

thanks in advance.

the only solution is by changing PA no other solution so please try to find PA jumpers

ranagaurav · 01-25-2010, 16:22

where is location in board of pa any pic

m_salunkhe2007 · 03-09-2010, 05:46

Quote:

Originally Posted by nakshatra

Hi to all

Now these days , we observe , very frequently coming

incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc.

If any one have this soloution for it plz post here.

what we have tried is :-

1. full flash
2. rebuild
3. nam change

but no soloution

except PA change (we got success after change pa).

but PA availability in the market is very rare.

so we need any other solution.

thanks in advance.

Does anybody have a solution for this problem except changing PA.

..::BobbyMobiles::.. · 03-09-2010, 06:31

hello chinauncom file flash 100% work but not wrny

mehuldedhia · 03-14-2010, 18:47

No way when u touch the pa it gets hot.i have replaced PA from dead set and mobile is working fine so do not wast time. the only solution for all cdma sets with same problem is change PA. this problem comes in all cdma. so please try to find jumper for PA

~AKSingh~ · 03-14-2010, 18:58

Quote:

Originally Posted by nakshatra

Hi to all

Now these days , we observe , very frequently coming

incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc.

If any one have this soloution for it plz post here.

what we have tried is :-

1. full flash
2. rebuild
3. nam change

but no soloution

except PA change (we got success after change pa).

but PA availability in the market is very rare.

so we need any other solution.

thanks in advance.

if hardware has been checked thourghly
here is the solution

open any rebuilding software
connect cable by usb to serial or simple serial interface
click rebuild
notice Auto test appears on screen remove cable atonce
now set showing only auto test
now >
all test commands u can visit or go through
find rx tx gain u have to calibrate it
have a good set to compare
u can easily calibrate the network

thats all

br,

loverajgoyal · 03-15-2010, 10:01

use full reblid tool

http://www.megaupload.com/?d=970O28I4

use thanks

etool30 · 03-15-2010, 19:42

Instead of Using USB Cable to rebuild models like b239 and b259; remove the serial number sticker, You will find the IF Jack for SW & rebuild below this Sticker. Use rx tx & gnd connections. Connect it infinity and use infinity post in pst, use SCH-S269 PST to rebuild the set. Your problem will be solved. Don't tamper hardware by changing pa, etc. This solution is already tested by me. Screenshot or log cannot be posted for this complaint. You guys too can test and post your valuable report for the other users of this great forum.

Regards,

Etool30

avijeet · 03-16-2010, 04:08

post board image i past the pa jumper..............

***MyGSM World*** · 07-23-2010, 21:31

Quote:

Originally Posted by etool30

Instead of Using USB Cable to rebuild models like b239 and b259; remove the serial number sticker, You will find the IF Jack for SW & rebuild below this Sticker. Use rx tx & gnd connections. Connect it infinity and use infinity post in pst, use SCH-S269 PST to rebuild the set. Your problem will be solved. Don't tamper hardware by changing pa, etc. This solution is already tested by me. Screenshot or log cannot be posted for this complaint. You guys too can test and post your valuable report for the other users of this great forum.

Regards,

Etool30

I Tried Completely Your Solution But Problem Not Solve Need Other Solution

etool30 · 07-24-2010, 10:01

Quote:

Originally Posted by mygsm world

I Tried Completely Your Solution But Problem Not Solve Need Other Solution

This is the one and only procedure I have been using successfully for the last 4 months. If problem repeats by using Pst S269, use pst of the particular model you have.

achintya · 07-24-2010, 12:16

this is not perfect solution , i have tried all of this but only pa change can solve this problem............

11-01-2009, 04:52	#1 (permalink)
nakshatra Registered User Join Date: Jan 2008 Location: India Posts: 642 Member: 690799 Status: Offline Thanks Meter: 157	samsung b239 & other cdma model no incoming & outgoing very big problem Hi to all Now these days , we observe , very frequently coming incoming & outgoing call problem ever there is a full network in Samsung CDma handsets like B239 etc. If any one have this soloution for it plz post here. what we have tried is :- 1. full flash 2. rebuild 3. nam change but no soloution except PA change (we got success after change pa). but PA availability in the market is very rare. so we need any other solution. thanks in advance.

03-15-2010, 10:01	#10 (permalink)
loverajgoyal Crazy Poster Join Date: Nov 2004 Age: 46 Posts: 55 Member: 91651 Status: Offline Thanks Meter: 7	10000000000%ok use full reblid tool http://www.megaupload.com/?d=970O28I4 use thanks Last edited by loverajgoyal; 03-15-2010 at 10:09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Haier c2000/3010/5000/6000 etc, full network but no incoming & outgoing call	nakshatra	Various CDMA/TDMA Cell Phones	12	10-04-2013 20:16
1100 no incomeing & no outgoing	hasanphone	Nokia Hardware & Hardware Repair	2	02-13-2008 16:12
3105 no incoming only outgoing.	shoeb7	Nokia CDMA	3	08-07-2006 20:31
TM 100 no incoming & outgoing calls !!!!!	Yashaka	Sharp	4	11-10-2004 17:31
t100 no incomeing & outgoing	SATISH	Samsung Hardware Repair	5	08-09-2004 09:28

01-09-2010, 06:31	#3 (permalink)
m k singh Major Poster Join Date: Oct 2008 Posts: 43 Member: 878797 Status: Offline Thanks Meter: 11	u also lg 3500 pa use dear.

01-25-2010, 16:22	#5 (permalink)
ranagaurav No Life Poster Join Date: Nov 2008 Location: gsm hosting Posts: 5,609 Member: 907098 Status: Offline Sonork: 100.1601140 Thanks Meter: 705	where is location in board of pa any pic

03-09-2010, 06:31	#7 (permalink)
..::BobbyMobiles::.. Freak Poster Join Date: Nov 2008 Location: BHIMAVARAM Age: 36 Posts: 281 Member: 900602 Status: Offline Thanks Meter: 99	hello chinauncom file flash 100% work but not wrny

03-14-2010, 18:47	#8 (permalink)
mehuldedhia Junior Member Join Date: Jul 2006 Posts: 19 Member: 312822 Status: Offline Thanks Meter: 3	No way when u touch the pa it gets hot.i have replaced PA from dead set and mobile is working fine so do not wast time. the only solution for all cdma sets with same problem is change PA. this problem comes in all cdma. so please try to find jumper for PA

03-15-2010, 19:42	#11 (permalink)
etool30 Freak Poster Join Date: Oct 2004 Location: KADAPA, A.P. INDIA. Age: 52 Posts: 324 Member: 86802 Status: Offline Thanks Meter: 457	Instead of Using USB Cable to rebuild models like b239 and b259; remove the serial number sticker, You will find the IF Jack for SW & rebuild below this Sticker. Use rx tx & gnd connections. Connect it infinity and use infinity post in pst, use SCH-S269 PST to rebuild the set. Your problem will be solved. Don't tamper hardware by changing pa, etc. This solution is already tested by me. Screenshot or log cannot be posted for this complaint. You guys too can test and post your valuable report for the other users of this great forum. Regards, Etool30

03-16-2010, 04:08	#12 (permalink)
avijeet Freak Poster Join Date: Jun 2007 Posts: 200 Member: 520588 Status: Offline Thanks Meter: 58	post board image i past the pa jumper..............

07-24-2010, 12:16	#15 (permalink)
achintya No Life Poster Join Date: Jul 2007 Location: kolkata, india Posts: 939 Member: 553420 Status: Offline Sonork: 100.1624012 Thanks Meter: 129	this is not perfect solution , i have tried all of this but only pa change can solve this problem............