huawei e5573cs-322 unlock done
 

Nigeria locked E5573 router carries firmware version 21.180.17.01.284 and can be unlocked easily. Newer version firmware 21.315.xx.xx by Nigeria mtn and Idea device firmware version 21.200.xx.xx can not be unlocked easily, means you have to take the help of boot shot since it gives error 19 during the firmware update.

Now in the Indian market, there is no more E5573s-322 modems are available. Both the firms, Airtel and Idea have launched E5573cs-322 router. Airtel locked E5573cs-322 device carries firmware 21.318.09.00.284 and WebUI 17.100.15.01.284, while Idea locked router comes with WebUI version 17.100.15.01.356.

Both devices are running with higher firmware and while changing the firmware, either it gives error 19 or asks for data-lock code, means in both situation you can unlock it. unlocking solution of the E5573cs-322 router. In unlocking, there is a bin file and two firmware are involved.
Externally Huawei E5573cs-322 and E5573cs-606 looks similar, but inside the device, there is a difference between chipset.
How to Unlock Huawei E5573cs-322 MiFi Router locked to mtnnigeria and Idea?

Before proceeding with steps, switch on the E5573cs-322 MiFi router and connect to your PC with USB cable. Open My Computer > Virtual CD-ROM. Install in the PC. It will automatically open the default page of the router.

Now process with further steps.

1. Download the E5573cs-322 USB loader file

2. Dismantle or unscrew the device.

3. Let the battery inside the device and switch off the router.

4. Connect USB cable to router.

5. Touch the boot pin and ground of the board from any metal / wire as shown in above image.

6. From the other hand, insert USB cable another end to PC.

7. It will produce a sound and you will see something is installing on your device.

8. Remove the metal / wire from the board.

9. Now download Balong tool.

10. Install the latest “Huawei mobile partner“ on your computer.

11. Run Balong tool.

12. Click “Detect” button. It will show COM Port with “BOOT_3G”.

13. Locate the “Loader” file which you have got in the email.

14. Click on “Load”.15. Once progress bar reaches the end, you will again notice something is installing on your PC.

Note: You can check in COM ports, you will see two Huawei ports.

16. Close the USB Balong tool now.

17. Now download E5573cs-322 firmware version 21.318.99.03.00.

18. Run the Exe file and update your device.

soliution
 

dear i am from pakistan
operater zong cm pk introduce e5573cs-322 device .first we apply loader in balong tool after we downgrade at 21.318.99 .xx fw.it is sucsessfully write but when we update another version in this device (upgrade_) then device go to dead mode/boot mode(attach bootpin+gnd) it seen 1- port pc ui interface(com4).only this problem in pakistan
have any solution ?
i trying to write through .exe >>> fail(firmware suck on geting device information)
if i write through .bin file then fw write fully but i fail again
have any solution?

it`s because u are using the wrong usbloader, it must be for e5573cs-322 before it will work.
u can follow this link to download usbloader.......[URL="http://d-h.s of luck

it`s because u are using the wrong usbloader, it must be for e5573cs-322 before it will work.
u can follow this link to download usbloader.
Dev-Host - E5573cs-322-Boot-shot-499x800.rar - The Ultimate Free File Hosting / File Sharing Service

is this loader work for
Airtel locked E5573cs-609 device carries firmware 21.318.09.00.284
this model unlock

yes it will work on any e5573cs

(In unlocking, there is a bin file and two firmware are involved. )
After 18 step we need to flash with another firmware that is second firmware
So which is that firmware plz share the link

u can update with this
Huawei_E5573cs-609_WEBUI-17.100.15.01.356_India_Idea; if is e5573cs-609

Its webui
i asking second flash firmware

This is the link for the files u need

Dev-Host - E5573Cs-322TCPU-21.318.03.00.00_Firmware_general_2.zip - The Ultimate Free File Hosting / File Sharing Service


DON`T FORGET THE THANKS

balong tool detect shows nothing
 

hello sir, when short the boot and gnd pin and insert the usb cable, it only shows usb com not successfully installed, and then when i open balong tool and click detect. it doesn't show any message. and shows nothing in com.

help me please

haha you download this usbloader from our website
routerunlock.com
and prove that you unlock this router world

which boot shot pic you show it is our website pic
and its our loader
admin kamesh unlock your router and you save all procedure

good work keep steal data

u need EC5377_Driver_pack ......
download this
Dev-Host - EC5377_Driver_pack.rar - The Ultimate Free File Hosting / File Sharing Service

Go to ur site and look for sech444 cos i was there admin kamesh was not able to unlock it and he was nt having the usbloader for e5573cs-322, so stop saying things that u doin`t know cos i know what i`m doing....
i`m doing this cos i didn`t pay a deam to anybody to unlock it, if i should give credit to somebody i will give it to GOOGLE
......https://www.google.com.ng/.......

"Hello Sir" i am from pakistan
I have Huawei E5573CS-322 4G LTE Device locked by ZONG Pakistan,
having Firmware version 21.318.03.01.306 and Web UI version:17.100.15.02.306
I Want to unlock this device for other network.
Kindly help me in this regard and give me the stepswise guidance, also tell me the two Firmware version which i downgrade/upgrade to unlock this device and how
i shall be very gladfull to you,,... for this cooperation.