Need Dump ZTE MF910+ Djezzy

[rafik23]

Hi ,
after flashing my ZTE 910 With telia 09 firmware without taking a dump from my router , now i loose in it internet connection and wifi originaly it was destinated for Djezzy algeria
who can help me for restoring it ?
the difference is the telia firmware work with oled screen and mine work with led lights for showing state , then it isnt same firmware and some difference in hardware.
the method for getting dump is :
1- getting qtools_win.zip
2 - extract the zip file in directory ex: c:\qtools_win
3 - logon on your modem in http://192.168.0.1
4- launch in another page
http://192.168.0.1/goform/goform_pro...tchCmd=FACTORY
it change the router to modem
5- in device manager you find something seem like this :



then you launch rawdump9x25.cmd it will ask de diag port



the result file names rawdump.bin is approx 500 Mb after compress with 7 zip it dont exceed 100 Mb .

and thanx in advance

[malek_bh]

plz explaine how to ?

[WASHIMKAR82]

Hello plese active me

[miseajour87]

here is the dump
https:// mega. nz/ #!z8sUlaQQ!xtFPh227BnHXdtdVIApMIowdS-FC-jbBlzdk9a8YtBk

[Veikko]

Originally Posted by rafik23

Hi ,
after flashing my ZTE MF910 With telia 09 firmware without taking a dump from my router , now i loose in it internet connection and wifi originaly it was destinated for Djezzy algeria
who can help me for restoring it ?
the difference is the telia firmware work with oled screen and mine work with led lights for showing state , then it isnt same firmware and some difference in hardware.
the method for getting dump is :
1- getting qtools_win.zip
2 - extract the zip file in directory ex: c:\qtools_win
3 - logon on your modem in http://192.168.0.1
4- launch in another page
http://192.168.0.1/goform/goform_pro...tchCmd=FACTORY
it change the router to modem
5- in device manager you find something seem like this :



then you launch rawdump9x25.cmd it will ask de diag port



the result file names rawdump.bin is approx 500 Mb after compress with 7 zip it dont exceed 100 Mb .

and thanx in advance

What about changing to connect on another PC?

[bentchek]

hi pleas help me to unlock my zte 910 + for all operator

[kakah2011]

Hi please can you help me to exit fastboot mode on this modem ?
The modem is detest as Android Sooner Single ADB Interface
I tried a lot of commands as ''fastboot reboot reboot'' but nothing, is stucks on this mode
Please help

[miress]

Originally Posted by miseajour87

here is the dump
https:// mega. nz/ #!z8sUlaQQ!xtFPh227BnHXdtdVIApMIowdS-FC-jbBlzdk9a8YtBk

thanks you my friend
How use its in my mf910+ please help me

[rafik23]

Originally Posted by miress

thanks you my friend
How use its in my mf910+ please help me

hi
the method is explain in 1st post but you must make save nvram with qpst
after reflash restore nvram

thx for the dump but the problem has been resolved

[coolirc]

Originally Posted by rafik23

hi
the method is explain in 1st post but you must make save nvram with qpst
after reflash restore nvram

thx for the dump but the problem has been resolved

hi rafik can you post the nvram that worked for you i have the same situation 3G and 4G does not work i must restore nvram but i did not save it from the start.

thanks

[TeaMGeekz]

I have ZTE MF910+ running Maxis firmware and i want to remove the Maxis and have original ZTE firmware in it. I have another ZTE MF910+ running the Original ZTE firmware that i need. Is there a way to extract and flash it on the Maxis device ? Someone help pls

[kamikazizs]

Originally Posted by TeaMGeekz

I have ZTE MF910+ running Maxis firmware and i want to remove the Maxis and have original ZTE firmware in it. I have another ZTE MF910+ running the Original ZTE firmware that i need. Is there a way to extract and flash it on the Maxis device ? Someone help pls

You are in the right post you have to do exactly the descreption so you can extrat the original firmware from one modem to upload it to the other but remembere that you have to change the IMEi after that else you have two modem with the same IMEI

[TeaMGeekz]

Originally Posted by kamikazizs

You are in the right post you have to do exactly the descreption so you can extrat the original firmware from one modem to upload it to the other but remembere that you have to change the IMEi after that else you have two modem with the same IMEI

If i got it right, the post Only explains how to get / extract the dump file, someone explain how to upload it to the other modem please, which command/ tool to use ?


Thanks

[TeaMGeekz]

I also have 2pcs ZTE MF920V Optus Logo soft bricked - interrupted during update and therefore will power on and connect for 5 seconds then go OFF and Signal indicator remains flashing.
If anyone can help me restore it.

[kamikazizs]

Originally Posted by TeaMGeekz

If i got it right, the post Only explains how to get / extract the dump file, someone explain how to upload it to the other modem please, which command/ tool to use ?


Thanks

Originally Posted by TeaMGeekz

I also have 2pcs ZTE MF920V Optus Logo soft bricked - interrupted during update and therefore will power on and connect for 5 seconds then go OFF and Signal indicator remains flashing.
If anyone can help me restore it.

You have right ; You do the same think with this command but you must have the dump file in the folder and copy this command "restorrawdump 9x25"to the same folder""qtools" and for the other modem MF920V i have no idea!
https://mega.nz/#!Q8BGnYAJ!4o3a2DHrfEXxw8YnE5Al1OmI3hq0FE2j4D0brdy YcfU