Alcatel 2010x dead [SOLVED] ★★★★★ - GSM-Forum

bvm21 · 01-29-2015, 10:43

Phone dead.Help me please.what is this error?

DA version: 5.1316.00.00
ROOT CERTIFICATE ENABLED.
USER SELECTION : WRITE FIRMWARE.
MODEL SELECTED : OT-2010
Com port opened...Press power on
S_ROOTCERT_HANDLE_IS_NOT_READY
Error code:5072
ALL DONE.

NCKCDMA · 01-29-2015, 13:44

Possible faulty flash chip, or damaged by other tools.

Br,
NCK Team

bvm21 · 01-29-2015, 15:01

Quote:

Originally Posted by NCKCDMA

Possible faulty flash chip, or damaged by other tools.

Br,
NCK Team

NCK Box can restore phone?

NCKCDMA · 01-29-2015, 15:42

If its hardware fault, then no Software can restore it.

Also you have not yet mentioned its condition etc.

Br,
NCK Team

bvm21 · 01-30-2015, 11:23

Quote:

Originally Posted by NCKCDMA

If its hardware fault, then no Software can restore it.

Also you have not yet mentioned its condition etc.

Br,
NCK Team

Phone flash and after the phone is not included

**Fast Unlocking** · 01-30-2015, 12:59

can you post screenshot using latest version of NCK Box generic MTK module ?

need also debug log uploaded somewhere, as this log above means nothing really

bvm21 · 01-30-2015, 14:08

Quote:

Originally Posted by Fast Unlocking

can you post screenshot using latest version of NCK Box generic MTK module ?

need also debug log uploaded somewhere, as this log above means nothing really

latest version NCK box. screenshot:
https://yadi.sk/i/G0iYRp9ueM2WC

**Fast Unlocking** · 01-30-2015, 14:09

great thanks but here missing debug log...

bvm21 · 01-30-2015, 16:55

Quote:

Originally Posted by Fast Unlocking

great thanks but here missing debug log...

Log in same screenshot

NCKCDMA · 01-31-2015, 05:02

Didn't you noticed "debug" word before log?

Please check image below. Tick it and then try to write firmware. It will create debug_log file in its folder. Upload that file somewhere and post link. DONOT COPY PASTE CONTENT OF THIS FILE.

Br,
NCK Team

bvm21 · 01-31-2015, 13:09

Quote:

Originally Posted by NCKCDMA

Didn't you noticed "debug" word before log?

Please check image below. Tick it and then try to write firmware. It will create debug_log file in its folder. Upload that file somewhere and post link. DONOT COPY PASTE CONTENT OF THIS FILE.

Br,
NCK Team

sorry. I thought about not. here is the debug log :
https://yadi.sk/d/3HYERzbyeN6sc

**orbita** · 02-01-2015, 11:50

hi bvm21.
Contact me please directly using yahoo mesenger.

bvm21 · 02-03-2015, 09:26

Quote:

Originally Posted by orbita

hi bvm21.
Contact me please directly using yahoo mesenger.

Hi.I wrote to you on yahoo

**orbita** · 02-03-2015, 12:31

hi bvm21.
Contact me please directly using yahoo mesenger.

bvm21 · 02-03-2015, 15:46

This log:

DA version: 5.1316.00.00
ROOT CERTIFICATE ENABLED.
USER SELECTION : WRITE FIRMWARE.
MODEL SELECTED : OT-2010
Connect phone in boot mode ...
Com port ok : COM33
Phone detected...Please wait
Download DA now...You can release power on
DA download finished...Getting phone info
BaseBand CPU:MT6250_S0001
BaseBand CPU Secure Version : 5 (Secure baseband)
INT RAM: 424Kb
EXT RAM: 64Mb SRAM
FLASH TYPE : NOR
ID: NOR

128Mb+64Mb) [Numonyx] N25W128 size:0x01000000
CHANGE BAUDRATE SUCCES
FORMATING FLASH.
Fat empty or already formated, skip
START DOWNLOAD FLASH.
MAKE PREFLASH CONFIG, THIS CAN TAKE UP TO 1 MIN.
Process bootloader now...
Proceed preflashing.
ACTION : PROGRAMMING TARGET.
Finalization :S_DONE(0)
ALL DONE.

01-29-2015, 10:43	#1 (permalink)
bvm21 Major Poster Join Date: Mar 2011 Posts: 49 Member: 1534555 Status: Offline Thanks Meter: 1	Alcatel 2010x dead [SOLVED] ★★★★★ Phone dead.Help me please.what is this error? DA version: 5.1316.00.00 ROOT CERTIFICATE ENABLED. USER SELECTION : WRITE FIRMWARE. MODEL SELECTED : OT-2010 Com port opened...Press power on S_ROOTCERT_HANDLE_IS_NOT_READY Error code:5072 ALL DONE.

02-03-2015, 15:46	#15 (permalink)
bvm21 Major Poster Join Date: Mar 2011 Posts: 49 Member: 1534555 Status: Offline Thanks Meter: 1	This log: DA version: 5.1316.00.00 ROOT CERTIFICATE ENABLED. USER SELECTION : WRITE FIRMWARE. MODEL SELECTED : OT-2010 Connect phone in boot mode ... Com port ok : COM33 Phone detected...Please wait Download DA now...You can release power on DA download finished...Getting phone info BaseBand CPU:MT6250_S0001 BaseBand CPU Secure Version : 5 (Secure baseband) INT RAM: 424Kb EXT RAM: 64Mb SRAM FLASH TYPE : NOR ID: NOR128Mb+64Mb) [Numonyx] N25W128 size:0x01000000 CHANGE BAUDRATE SUCCES FORMATING FLASH. Fat empty or already formated, skip START DOWNLOAD FLASH. MAKE PREFLASH CONFIG, THIS CAN TAKE UP TO 1 MIN. Process bootloader now... Proceed preflashing. ACTION : PROGRAMMING TARGET. Finalization :S_DONE(0) ALL DONE. Last edited by orbita; 02-03-2015 at 16:00.

01-29-2015, 13:44	#2 (permalink)
NCKCDMA No Life Poster Join Date: Jan 2013 Location: NCK Team Posts: 1,347 Member: 1873869 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,333	Possible faulty flash chip, or damaged by other tools. Br, NCK Team

01-29-2015, 15:42	#4 (permalink)
NCKCDMA No Life Poster Join Date: Jan 2013 Location: NCK Team Posts: 1,347 Member: 1873869 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,333	If its hardware fault, then no Software can restore it. Also you have not yet mentioned its condition etc. Br, NCK Team

01-30-2015, 12:59	#6 (permalink)
Fast Unlocking Product Manager Join Date: Jan 2002 Location: NCK Team Projects Posts: 16,665 Member: 94675 Status: Offline Sonork: 100.8888 QQ3161545070 Thanks Meter: 97,254	can you post screenshot using latest version of NCK Box generic MTK module ? need also debug log uploaded somewhere, as this log above means nothing really

01-30-2015, 14:09	#8 (permalink)
Fast Unlocking Product Manager Join Date: Jan 2002 Location: NCK Team Projects Posts: 16,665 Member: 94675 Status: Offline Sonork: 100.8888 QQ3161545070 Thanks Meter: 97,254	great thanks but here missing debug log...

01-31-2015, 05:02	#10 (permalink)
NCKCDMA No Life Poster Join Date: Jan 2013 Location: NCK Team Posts: 1,347 Member: 1873869 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,333	Didn't you noticed "debug" word before log? Please check image below. Tick it and then try to write firmware. It will create debug_log file in its folder. Upload that file somewhere and post link. DONOT COPY PASTE CONTENT OF THIS FILE. Br, NCK Team

02-01-2015, 11:50	#12 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	hi bvm21. Contact me please directly using yahoo mesenger.

02-03-2015, 12:31	#14 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	hi bvm21. Contact me please directly using yahoo mesenger.