Alcatel OT-9008T unlock done with great NCK box [SUCCESS REPORT] ★★★★★ - GSM-Forum

unlock phones · 02-21-2018, 08:57

Alcatel OT-9008T unlock done

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.7
Selected model: OT-9008T
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM17)
Boot mode: Brom
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) TOSIBA 0x303136473330
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030313647 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Preloader SEC version: 2
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM18)
-Reading GPT Drive OK
MODEL FROM PROINFO: 9008T-2AVDAU1
SECRO FROM PROINFO: X3F0OV02CK00
OTP IMEI: 357245080064801
OTP IMEI: 357245080064819
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:99)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:99)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
All done.

JPYRO · 04-18-2018, 04:25

problem unlocking

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: OT-9008T
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM7)
Boot mode: Brom
All done.

unlock phones · 04-18-2018, 06:36

Quote:

Originally Posted by JPYRO

problem unlocking

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: OT-9008T
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM7)
Boot mode: Brom
All done.

install correct drivers and disable high speed port in the nck box exe

**orbita** · 04-18-2018, 07:47

You have problem with drivers.
Aditionally try meta mode connection.
Some user reported unlock using meta mode.

02-21-2018, 08:57	#1 (permalink)
unlock phones No Life Poster Join Date: Apr 2011 Posts: 3,207 Member: 1552610 Status: Offline Sonork: 100.1604734 Thanks Meter: 1,370	Alcatel OT-9008T unlock done with great NCK box [SUCCESS REPORT] ★★★★★ Alcatel OT-9008T unlock done Selected connection metod: FLASH Mode Exe version: NCKBox AndroidMTK 1.8.8.7 Selected model: OT-9008T Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM17) Boot mode: Brom Phone detected...Please wait Sending DA agent, please wait... Using Algo 2. ---------------------------------------------------- BaseBand CPU :MT6737M BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : FE ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (117Gb+16384Mb) TOSIBA 0x303136473330 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 11010030313647 : 000000000000000000 EMMC UA SIZE: 0x3ab400000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3ac000000 [14.688 GB] Preloader SEC version: 2 Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM Port (COM18) -Reading GPT Drive OK MODEL FROM PROINFO: 9008T-2AVDAU1 SECRO FROM PROINFO: X3F0OV02CK00 OTP IMEI: 357245080064801 OTP IMEI: 357245080064819 Reading security, wait... SIM[1]: Block1(N): Locked (remain:99) Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Locked (remain:99) Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Unlocking target...please wait. [0]Unlock finished. [1]Unlock finished. Wait untill phone will start charging. All done.

04-18-2018, 04:25	#2 (permalink)
JPYRO Junior Member Join Date: Jul 2010 Age: 34 Posts: 16 Member: 1346968 Status: Offline Sonork: 2eb97a7e4968a1dfd04079371 Thanks Meter: 1	problem unlocking Selected connection metod: FLASH Mode Exe version: NCKBox AndroidMTK 1.8.8.8 Selected model: OT-9008T Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM7) Boot mode: Brom All done.

04-18-2018, 07:47	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	You have problem with drivers. Aditionally try meta mode connection. Some user reported unlock using meta mode.