GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > NCK Team products > NCK Box

Reply
 
LinkBack Thread Tools Display Modes
Old 05-03-2016, 12:00   #1 (permalink)
No Life Poster
 
dereje's Avatar
 
Join Date: Feb 2007
Location: Earth
Posts: 1,352
Member: 449991
Status: Offline
Thanks Meter: 860
huawei y360-u31 hung logo solved by nck box [USER REPORT] ★★★★★


first read file from working phone
red flash

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM256)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 40:00:00:00:00:00:00:00
EMMC CID: 45010053454D30 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM376)
IMEI[1]: 866838020456089
IMEI[2]: 866838020456089
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing MBR
Reading: BEGIN: 0xc00000 - LEN: 0x200
Start procesing EBR1
Reading: BEGIN: 0xc80000 - LEN: 0x200
[0]Start procesing proinfo
Reading: BEGIN: 0xd00000 - LEN: 0x1000
Start procesing nvram
IMEI[1] from NVRAM:
IMEI[2] from NVRAM:
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1500000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1f00000 - LEN: 0xa00000
Start procesing UBOOT ......
Start processing BOOTIMG
Reading: BEGIN: 0x2980000 - LEN: 0x596000
Start processing RECOVERY
Reading: BEGIN: 0x3980000 - LEN: 0x5ee800
Start procesing secro
Start procesing LOGO ......
Start procesing EBR2
Reading: BEGIN: 0x5300000 - LEN: 0x200
Start procesing GLOBAL_CUST ......
Reading: BEGIN: 0x5d80000 - LEN: 0xc800000
Start procesing ROOTM ......
Reading: BEGIN: 0x12580000 - LEN: 0x400000
Start procesing system
Reading: BEGIN: 0x12980000 - LEN: 0x51400000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Saved to : C:\Users\dereje\Documents\Android_MTK\firmware_bac kup\MT6582_S01_EMMC_05_03_2016_13_43_33
Wait untill phone will start charging.
All done.

flash phone with bucup then problem solved


Flash files count is :15
Action : Firmware update.
Selected Model: Huawei: Ascend Y360-U31
Exe version: NCKBox AndroidMTK 1.8.6.7
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM256)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM376)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
  Reply With Quote
Old 12-02-2016, 15:52   #2 (permalink)
No Life Poster
 
zakiyyboss's Avatar
 
Join Date: May 2004
Location: Mauritius
Posts: 3,227
Member: 64823
Status: Offline
Thanks Meter: 411
Donate money to this user
Quote:
Originally Posted by dereje View Post
first read file from working phone
red flash

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM256)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 40:00:00:00:00:00:00:00
EMMC CID: 45010053454D30 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM376)
IMEI[1]: 866838020456089
IMEI[2]: 866838020456089
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing MBR
Reading: BEGIN: 0xc00000 - LEN: 0x200
Start procesing EBR1
Reading: BEGIN: 0xc80000 - LEN: 0x200
[0]Start procesing proinfo
Reading: BEGIN: 0xd00000 - LEN: 0x1000
Start procesing nvram
IMEI[1] from NVRAM:
IMEI[2] from NVRAM:
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1500000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1f00000 - LEN: 0xa00000
Start procesing UBOOT ......
Start processing BOOTIMG
Reading: BEGIN: 0x2980000 - LEN: 0x596000
Start processing RECOVERY
Reading: BEGIN: 0x3980000 - LEN: 0x5ee800
Start procesing secro
Start procesing LOGO ......
Start procesing EBR2
Reading: BEGIN: 0x5300000 - LEN: 0x200
Start procesing GLOBAL_CUST ......
Reading: BEGIN: 0x5d80000 - LEN: 0xc800000
Start procesing ROOTM ......
Reading: BEGIN: 0x12580000 - LEN: 0x400000
Start procesing system
Reading: BEGIN: 0x12980000 - LEN: 0x51400000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Saved to : C:\Users\dereje\Documents\Android_MTK\firmware_bac kup\MT6582_S01_EMMC_05_03_2016_13_43_33
Wait untill phone will start charging.
All done.

flash phone with bucup then problem solved


Flash files count is :15
Action : Firmware update.
Selected Model: Huawei: Ascend Y360-U31
Exe version: NCKBox AndroidMTK 1.8.6.7
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM256)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM376)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
Please Can you post the backup FILE.. thank you..... !!
  Reply With Quote
The Following User Says Thank You to zakiyyboss For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 22:14.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.21234 seconds with 7 queries

SEO by vBSEO