Itel it1553 mt6572 nand reset privacy protection and read firmware not supported - GSM-Forum

zwanaboy · 05-17-2018, 13:42

Brand: alps
Board: a8_base
Model: 1553
Name: a8_base
Release: IT1553-20170608
Version: 5.1
Mediatek Version: ALPS.KK1.MP7.V1.5
Branch: KK1.MP7
Platform: MT6572
Reading imei
IMEI[1]: 3570
IMEI[2]: 35708
Modem Version: WR8.W1315.MD.WG.MP MT6572_WE_KK_GP

Exe version: NCKBox AndroidMTK 1.8.9.0
Selected model: ELBRUS
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno S9320AE PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Micron] MT29C4G96MAZAPCJA_5IT
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 2048 SpareSize: 64 BMT Blocks 80
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : Tinno S9320AE DA USB VCOM (Android) (COM35)
Searching partiton table, wait..
Wait untill phone will start charging.

johnmadzeka1 · 05-17-2018, 14:57

Quote:

Originally Posted by zwanaboy

Brand: alps
Board: a8_base
Model: 1553
Name: a8_base
Release: IT1553-20170608
Version: 5.1
Mediatek Version: ALPS.KK1.MP7.V1.5
Branch: KK1.MP7
Platform: MT6572
Reading imei
IMEI[1]: 3570
IMEI[2]: 35708
Modem Version: WR8.W1315.MD.WG.MP MT6572_WE_KK_GP

Exe version: NCKBox AndroidMTK 1.8.9.0
Selected model: ELBRUS
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno S9320AE PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Micron] MT29C4G96MAZAPCJA_5IT
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 2048 SpareSize: 64 BMT Blocks 80
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : Tinno S9320AE DA USB VCOM (Android) (COM35)
Searching partiton table, wait..
Wait untill phone will start charging.

How a you my Brother bring it to my shop i will help you do it.

4mula · 05-18-2018, 11:35

Where is your shop?,just asking in case I need some jobs done.I am based in Greencroft

**orbita** · 05-18-2018, 12:35

This forum have comerial section, you can use it to promote your shop.
Closed.

05-17-2018, 13:42	#1 (permalink)
zwanaboy Registered User Join Date: Jul 2013 Location: Harare Posts: 437 Member: 1972271 Status: Offline Sonork: zwanaz Thanks Meter: 164	Itel it1553 mt6572 nand reset privacy protection and read firmware not supported Brand: alps Board: a8_base Model: 1553 Name: a8_base Release: IT1553-20170608 Version: 5.1 Mediatek Version: ALPS.KK1.MP7.V1.5 Branch: KK1.MP7 Platform: MT6572 Reading imei IMEI[1]: 3570 IMEI[2]: 35708 Modem Version: WR8.W1315.MD.WG.MP MT6572_WE_KK_GP Exe version: NCKBox AndroidMTK 1.8.9.0 Selected model: ELBRUS Action: Reset Privacy Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : Tinno S9320AE PreLoader USB VCOM (Android) (COM8) Boot mode: Preloader Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6572 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 256 MB DRAM ---------------------------------------------------- NAND: (4Gb+2048Mb) [Micron] MT29C4G96MAZAPCJA_5IT BOOT STYLE : NAND BOOT Size: 0x20000000 [0.500 GB] BlockSize: 2048 SpareSize: 64 BMT Blocks 80 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : Tinno S9320AE DA USB VCOM (Android) (COM35) Searching partiton table, wait.. Wait untill phone will start charging.

05-18-2018, 11:35	#3 (permalink)
4mula Freak Poster Join Date: Jan 2014 Location: Zimbabwe Posts: 225 Member: 2100642 Status: Offline Thanks Meter: 46	Shop location Where is your shop?,just asking in case I need some jobs done.I am based in Greencroft

05-18-2018, 12:35	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	This forum have comerial section, you can use it to promote your shop. Closed.