Micromax Q349 Frp Unlock Unsucess. need help - GSM-Forum

malka4u · 10-25-2019, 08:27

Read Info

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.1
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM110)
 Build ID: MRA58K
 Display ID: MMX_Q349_SW_V20_HW_V1.0_21072016
 Version: 6.0
 Build Date: Thu Jul 21 14:26:06 CST 2016
 Model: Micromax Q349
 Brand: Micromax
 Device: Q349
 Manufacturer: Micromax
 Mediatek Version Release: ALPS.W10.24.p0
 FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
 This phone have FRP partition.
 IMEI[1]: xxxxxxxxxxxxxxxxx
 IMEI[2]: xxxxxxxxxxxxxxxxx
 Wait untill phone will start charging.
 [0]All done.

Auto Reset FRP

Code:

 Exe version: NCKBox AndroidMTK 2.1
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Resetting userdata.
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Erase Mode Reset FRP

Code:

 Exe version: NCKBox AndroidMTK 2.1
 Selected model: 0-By CPU  ELBRUS
 [erase]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Checking data, wait...
 
 Erasing FRP, wait...
 [2]FORMAT - BEGIN: 0x4fa0000        - LEN: 0x100000        
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Write Mode Frp Reset

Code:

 Exe version: NCKBox AndroidMTK 2.1
 Selected model: 0-By CPU  ELBRUS
 [write]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

flash frp rest package

Code:

Flash files count is :4
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 2.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM110)
C:\Users\user\Documents\Android_MTK\frp_reset_package\MT6580_EMMC_MRA58K__6_0_Micromax Q349_Micromax_xxxxxxxxxxxxx_10_25_2019_13_06_40\preloader_backup_25_10_2019_13_07\preloader_p4200.bin
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.

all method try but frp remain not unlocked.

**orbita** · 10-25-2019, 09:01

This can meen read only emmc, or phone have another kind of lock, not frp.
Based on logs, all is ok, and must work.

malka4u · 10-25-2019, 09:13

Check emmc with another tool read write ok .. Phone show its frp lock .

AFTER ALL OPERATION STILL SHOW THIS

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKBox AndroidMTK 2.1
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM110)
 Build ID: MRA58K
 Display ID: MMX_Q349_SW_V20_HW_V1.0_21072016
 Version: 6.0
 Build Date: Thu Jul 21 14:26:06 CST 2016
 Model: Micromax Q349
 Brand: Micromax
 Device: Q349
 Manufacturer: Micromax
 Mediatek Version Release: ALPS.W10.24.p0
 FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
 This phone have FRP partition.
 IMEI[1]: 
 IMEI[2]: 
 Wait untill phone will start charging.
 [0]All done.

**orbita** · 10-25-2019, 09:25

Sure
In case of read only emmc will help only direct write-read checking.
This so called "Check emmc with another tool read write ok .. Phone show its frp lock" will not help you with exactly nothing.
Logic of all this is different and exactly why we not add this in our tool.
It's not real in many cases.
You have many posts in forum, i'am expected from you little more knowlege about how this work

Anyway...if other tool say all ok with emmc, you can do frp reset with other tool.
If with emmc is all ok, it must work.

malka4u · 10-25-2019, 09:28

Just another question?? If emmc readonly them full flash will be complete or not.. Version change after flash mean emmc read only or emmc is good ?

malka4u · 10-25-2019, 09:39

Code:

Flash files count is :11
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 2.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM109)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM110)
C:\Users\user\Desktop\MMX_Q349_SW_V20_HW_V2.0_21072016\preloader_backup_25_10_2019_14_06\preloader_p4200.bin
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
lk checksum is executing ...
boot checksum is executing ...
recovery checksum is executing ...
logo checksum is executing ...
secro checksum is executing ...
system checksum is executing ...
cache checksum is executing ...
userdata checksum is executing ...
Wait untill phone will start charging.
[0]All done.

AFTER FULL FLASH FRP RESET DONE.. MAY BE FIRMWARE HAVE SOMETHING BETTER LOCK.
FYI: EMMC SEEMS GOOD FOR NOW :-D

**orbita** · 10-25-2019, 09:47

In emmc flash ic exists small microcontroler what handle all storage space and we not work with storage, we work with this microcontroler, and error reporting also is handled by this microcontroler.
This is difference between nand and emmc.
If on nand storage we will have error on read only block, here microcontroler can report write ok, but block will remain not changed or changed with random data.

Your phone can have some so called bad blocks.
And deppend where this blocks is located, phone can not start after flash.
Or can start ok, here nobody can't say nothing 100%, only way to be sure 100% is to connect emmc to some jtag tool and check directly storage.
On full flash it send repartition command, it can help or phone will return after some time with same problem.
What meen this frp, if userdata checsum is ok, it was not changed, if we will modify somehow "not autorized" userdata, will be frp.
Bad blocks also can cause this "not autorized" modification.

malka4u · 10-25-2019, 09:52

Thank you sir . Please chang my post topic to unlock sucess..

10-25-2019, 09:01	#2 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	This can meen read only emmc, or phone have another kind of lock, not frp. Based on logs, all is ok, and must work.

10-25-2019, 09:25	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Sure In case of read only emmc will help only direct write-read checking. This so called "Check emmc with another tool read write ok .. Phone show its frp lock" will not help you with exactly nothing. Logic of all this is different and exactly why we not add this in our tool. It's not real in many cases. You have many posts in forum, i'am expected from you little more knowlege about how this work Anyway...if other tool say all ok with emmc, you can do frp reset with other tool. If with emmc is all ok, it must work.

10-25-2019, 09:28	#5 (permalink)
malka4u No Life Poster Join Date: Aug 2011 Location: bagmati pradesh Posts: 3,296 Member: 1626780 Status: Offline Thanks Meter: 1,275	Just another question?? If emmc readonly them full flash will be complete or not.. Version change after flash mean emmc read only or emmc is good ?

10-25-2019, 09:47	#7 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	In emmc flash ic exists small microcontroler what handle all storage space and we not work with storage, we work with this microcontroler, and error reporting also is handled by this microcontroler. This is difference between nand and emmc. If on nand storage we will have error on read only block, here microcontroler can report write ok, but block will remain not changed or changed with random data. Your phone can have some so called bad blocks. And deppend where this blocks is located, phone can not start after flash. Or can start ok, here nobody can't say nothing 100%, only way to be sure 100% is to connect emmc to some jtag tool and check directly storage. On full flash it send repartition command, it can help or phone will return after some time with same problem. What meen this frp, if userdata checsum is ok, it was not changed, if we will modify somehow "not autorized" userdata, will be frp. Bad blocks also can cause this "not autorized" modification.

10-25-2019, 09:52	#8 (permalink)
malka4u No Life Poster Join Date: Aug 2011 Location: bagmati pradesh Posts: 3,296 Member: 1626780 Status: Offline Thanks Meter: 1,275	Thank you sir . Please chang my post topic to unlock sucess..