NCK Box / NCK PRO Spreadtrum Module v0.7 Update Released - [05/02/2019] - GSM-Forum

**Fast Unlocking** · 02-05-2019, 00:52

1. Added Basic support for SC6531EFM
- Supported Repair IMEI
-- Factory Reset
--- Read & Write NVRam
---- Write PAC File.

2. Added 2 Methods to service Phones in DIAG Mode.
- Old Method allow only to:
-- Read info (SimLock)/Reset phone/Repair IMEI/BT/Wifi
- New Method allow also to:
-- Perform Direct unlock in diag mode.
--- Usually new method work on phones with android 5.1 and more new.
---- It work also on SC6531EFM, possible on other generic phones too.

3. Added support for Simlock types 2,3,5 and 6 in DIAG Mode.
- For this types will be displayed sim unlock code on read info, and new phones will allow direct unlock.
-- For other types will need Simlock backup and link to phone firmware.

3. Remade PAC files Writer.

-- Now it become more universal and stable.
--- Supported EMMC and NOR phones
---- NAND phones support will be added in incoming updates.

4. Added possibility to select custom backup directory.

5. Added custom loader for wiko sunny 3 in custom folder.
This loader can be used to remove phone FRP.
To perform sim unlock is recommended to use DIAG Mode.

Official Website:

NCK BOX

Download from Support Access Software to Access Download Area

Link:

Download Area

azaanali · 02-05-2019, 03:21

Thanks for you NCK TEAM,Good Update but plz add Android 8.1.0 formate & frp...Thanks in Advance

azaanali · 02-05-2019, 03:37

Thanks for you NCK TEAM,Good Update but plz add Android 8.1.0 formate & frp...Thanks in Advance

azaanali · 02-05-2019, 03:38

Waooo verry nice update

cystemcel · 02-05-2019, 05:42

Good add frp side load qualcomm

kapilanand11 · 02-05-2019, 06:23

CK BOX & Avengers Spreadtrum Module v0.7 Update Released - [05/02/2019]

Sharif tamu · 02-05-2019, 08:34

Please team thanks for update but next time 8.1.0 needed to be suppoted too thanks for your best

mmtheo · 02-05-2019, 10:56

Quote:

Originally Posted by azaanali

Thanks for you NCK TEAM,Good Update but plz add Android 8.1.0 formate & frp...Thanks in Advance

android 8.1 format is supported already in diag mode, and More than 60% of 8.1 FRP is supported via custom loader, for example all ITEL A14,A16 8.0 ALL MOBICEL 8.1 supported too.

hunter-s · 02-05-2019, 12:08

sunny 3 unlock done

ACTION: Unlock Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 153672++++ release-keys
Serial number: LA05184+++++
IMEI 1: 35807409+++++
IMEI 2: 358074095+++++
BT: 44D3AD34+++
WIFI: 44D3AD3++++
Reading simlock, wait....

[0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10]
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 88190293
Sim 2 Unlock Code: 88191273
Warning, this is factory key, some opperators can modify factory key.
Saved to: C:\Users\hunte\Documents\spreadtrum_module\backup\ spd_simlock_nvram_backup\358074095++++++__W_K120SU N_user_8_1_0_OPM2_171019_012_1536724428_release_ke ys_LA051843004208\
Writing simlock...
Writing simlock ok
Done. Thanks in Advance

zinnou · 02-05-2019, 12:56

sunny 3 unlock done read code done

ACTION: Read Simlock Info.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Detected: SPRD U2S Diag (COM27)
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys
Serial number: LA051842001254
IMEI 1: 358074095******
IMEI 2: 358074095******
BT: 44D3AD3487F1
WIFI: 44D3AD346861
Reading simlock, wait....
[USER]Simlock Status: UNLOCKED
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 88190963
Sim 2 Unlock Code: 88191843
Warning, this is factory key, some opperators can modify factory key.
Done.

skidotech · 02-05-2019, 13:34

Most wanted update thanks nck team

flamuri · 02-05-2019, 14:54

Start Detect phone.
With powered off phone, insert usb cable
Detected: SPRD U2S Diag (COM23)
Port opened ok.
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Making 10 sec timeout..
Done.
I CANT ENTERING TO DIAG MODE PLEASE HEL ME

flamuri · 02-05-2019, 15:59

THANKS NCK BOX I UNLOCK THIS SUNNY3 AND REPAIR IMEI EXE: NckBox Spreadtrum Module 0.7
SELECTED: SC7731C_EMMC
ACTION: SimUnlock
Custom loader: wiko_Sunny3.loader
Detected: SPRD U2S Diag (COM23)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: WIKO
Hardware: k120_v1.1.0
Build Id: OPM2.171019.012
Model: Sunny3
Android Release: 8.1.0
Android Version: OPM2.171019.012 release-keys
IMEI 1: 358074095490***
IMEI 2: 358074095570***
Simlock Type: 3
Backup saved to: C:\Users\Flamuri\Documents\spreadtrum_module\backu p\spd_simlock_nvram_backup\358074095497148__W_K120 SUN_user_8_1_0_OPM2_171019_012_1536724428_release_ keys_LA051843002090\spreadtrum_module\simlock_back up_nvram\OPM2.171019.012 release-keys\w_fixnv1.bin
Start write unlock, wait...
Total Time: 00:00:19
Done.

basar · 02-06-2019, 23:42

Please HELP!

with Read Simlock Info I get this:

ACTION: Read Simlock Info.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Detected: SCI USB2Serial (COM70)
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys
Serial number: LA051843001456
IMEI 1: 358074095529676
IMEI 2: 358074095610476
BT: 44D3AD348517
WIFI: 44D3AD346587
Reading simlock, wait....

[0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10]
[0]Simlock Type: 0 0
Done.

BUT!!!
When I use Remove Simlock I get this error

ACTION: Unlock Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys
Serial number: LA051843001456
IMEI 1: 358074095529676
IMEI 2: 358074095610476
BT: 44D3AD348517
WIFI: 44D3AD346587
Reading simlock, wait....
[USER]Simlock Status: UNLOCKED
[0]Simlock Type: 0 0
Saved to: C:\Users\GB\Documents\spreadtrum_module\backup\spd _simlock_nvram_backup\358074095529676__W_K120SUN_u ser_8_1_0_OPM2_171019_012_1536724428_release_keys_ LA051843001456\

This simlock type is not supported yet.
Abort opperation.
Done.

Can You do update please for this version??

Thanks in advance

BR

Goran

farhanu · 02-08-2019, 18:24

good update we more waiting fast unlocking team

02-05-2019, 00:52	#1 (permalink)
Fast Unlocking Product Manager Join Date: Jan 2002 Location: NCK Team Projects Posts: 16,653 Member: 94675 Status: Offline Sonork: 100.8888 QQ3161545070 Thanks Meter: 97,189	NCK Box / NCK PRO Spreadtrum Module v0.7 Update Released - [05/02/2019] 1. Added Basic support for SC6531EFM - Supported Repair IMEI -- Factory Reset --- Read & Write NVRam ---- Write PAC File. 2. Added 2 Methods to service Phones in DIAG Mode. - Old Method allow only to: -- Read info (SimLock)/Reset phone/Repair IMEI/BT/Wifi - New Method allow also to: -- Perform Direct unlock in diag mode. --- Usually new method work on phones with android 5.1 and more new. ---- It work also on SC6531EFM, possible on other generic phones too. 3. Added support for Simlock types 2,3,5 and 6 in DIAG Mode. - For this types will be displayed sim unlock code on read info, and new phones will allow direct unlock. -- For other types will need Simlock backup and link to phone firmware. 3. Remade PAC files Writer. -- Now it become more universal and stable. --- Supported EMMC and NOR phones ---- NAND phones support will be added in incoming updates. 4. Added possibility to select custom backup directory. 5. Added custom loader for wiko sunny 3 in custom folder. This loader can be used to remove phone FRP. To perform sim unlock is recommended to use DIAG Mode. Official Website: NCK BOX Download from Support Access Software to Access Download Area Link: Download Area

02-05-2019, 03:37	#3 (permalink)
azaanali Freak Poster Join Date: Mar 2014 Location: PAKISTAN Posts: 240 Member: 2145475 Status: Offline Thanks Meter: 100	Thanks NCK TEAM & AVENGAR TEAM Thanks for you NCK TEAM,Good Update but plz add Android 8.1.0 formate & frp...Thanks in Advance

02-05-2019, 06:23	#6 (permalink)
kapilanand11 No Life Poster Join Date: Nov 2010 Posts: 602 Member: 1450664 Status: Offline Thanks Meter: 168	pl edit ck/nck CK BOX & Avengers Spreadtrum Module v0.7 Update Released - [05/02/2019]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-05-2019, 03:21	#2 (permalink)
azaanali Freak Poster Join Date: Mar 2014 Location: PAKISTAN Posts: 240 Member: 2145475 Status: Offline Thanks Meter: 100	Thanks for you NCK TEAM,Good Update but plz add Android 8.1.0 formate & frp...Thanks in Advance

02-05-2019, 03:38	#4 (permalink)
azaanali Freak Poster Join Date: Mar 2014 Location: PAKISTAN Posts: 240 Member: 2145475 Status: Offline Thanks Meter: 100	Waooo verry nice update

02-05-2019, 05:42	#5 (permalink)
cystemcel Insane Poster Join Date: Apr 2008 Location: Nicaragua Posts: 70 Member: 756129 Status: Offline Thanks Meter: 5	Good add frp side load qualcomm

02-05-2019, 08:34	#7 (permalink)
Sharif tamu Freak Poster Join Date: Aug 2017 Location: JOHANNESBURG Posts: 127 Member: 2749053 Status: Offline Sonork: Sharif Thanks Meter: 14	Please team thanks for update but next time 8.1.0 needed to be suppoted too thanks for your best

02-05-2019, 12:08	#9 (permalink)
hunter-s Freak Poster Join Date: Feb 2011 Location: FRANCE/Maroc Posts: 256 Member: 1509218 Status: Offline Thanks Meter: 163	sunny 3 unlock done ACTION: Unlock Phone. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140 Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 153672++++ release-keys Serial number: LA05184+++++ IMEI 1: 35807409+++++ IMEI 2: 358074095+++++ BT: 44D3AD34+++ WIFI: 44D3AD3++++ Reading simlock, wait.... [0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10] [3]Simlock Type: 0 0 Sim 1 Unlock Code: 88190293 Sim 2 Unlock Code: 88191273 Warning, this is factory key, some opperators can modify factory key. Saved to: C:\Users\hunte\Documents\spreadtrum_module\backup\ spd_simlock_nvram_backup\358074095++++++__W_K120SU N_user_8_1_0_OPM2_171019_012_1536724428_release_ke ys_LA051843004208\ Writing simlock... Writing simlock ok Done. Thanks in Advance

02-05-2019, 12:56	#10 (permalink)
zinnou Freak Poster Join Date: Jul 2008 Location: algeria Posts: 117 Member: 816596 Status: Offline Sonork: zinnou Thanks Meter: 14	sunny 3 unlock done read code done ACTION: Read Simlock Info. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Detected: SPRD U2S Diag (COM27) Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140 Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys Serial number: LA051842001254 IMEI 1: 358074095**** IMEI 2: 358074095**** BT: 44D3AD3487F1 WIFI: 44D3AD346861 Reading simlock, wait.... [USER]Simlock Status: UNLOCKED [3]Simlock Type: 0 0 Sim 1 Unlock Code: 88190963 Sim 2 Unlock Code: 88191843 Warning, this is factory key, some opperators can modify factory key. Done.

02-05-2019, 13:34	#11 (permalink)
skidotech Insane Poster Join Date: Jan 2017 Location: LAGOS NIGERIA Posts: 84 Member: 2669023 Status: Offline Thanks Meter: 17	Most wanted update thanks nck team

02-05-2019, 14:54	#12 (permalink)
flamuri Freak Poster Join Date: Jun 2008 Location: albania Posts: 373 Member: 787088 Status: Offline Thanks Meter: 22	Start Detect phone. With powered off phone, insert usb cable Detected: SPRD U2S Diag (COM23) Port opened ok. Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Making 10 sec timeout.. Done. I CANT ENTERING TO DIAG MODE PLEASE HEL ME

02-05-2019, 15:59	#13 (permalink)
flamuri Freak Poster Join Date: Jun 2008 Location: albania Posts: 373 Member: 787088 Status: Offline Thanks Meter: 22	THANKS NCK BOX I UNLOCK THIS SUNNY3 AND REPAIR IMEI EXE: NckBox Spreadtrum Module 0.7 SELECTED: SC7731C_EMMC ACTION: SimUnlock Custom loader: wiko_Sunny3.loader Detected: SPRD U2S Diag (COM23) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: WIKO Hardware: k120_v1.1.0 Build Id: OPM2.171019.012 Model: Sunny3 Android Release: 8.1.0 Android Version: OPM2.171019.012 release-keys IMEI 1: 358074095490* IMEI 2: 358074095570* Simlock Type: 3 Backup saved to: C:\Users\Flamuri\Documents\spreadtrum_module\backu p\spd_simlock_nvram_backup\358074095497148__W_K120 SUN_user_8_1_0_OPM2_171019_012_1536724428_release_ keys_LA051843002090\spreadtrum_module\simlock_back up_nvram\OPM2.171019.012 release-keys\w_fixnv1.bin Start write unlock, wait... Total Time: 00:00:19 Done.

02-06-2019, 23:42	#14 (permalink)
basar Freak Poster Join Date: Mar 2002 Location: Macedonia Age: 50 Posts: 191 Member: 10191 Status: Offline Thanks Meter: 21	Please HELP! with Read Simlock Info I get this: ACTION: Read Simlock Info. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Detected: SCI USB2Serial (COM70) Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140 Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys Serial number: LA051843001456 IMEI 1: 358074095529676 IMEI 2: 358074095610476 BT: 44D3AD348517 WIFI: 44D3AD346587 Reading simlock, wait.... [0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10] [0]Simlock Type: 0 0 Done. BUT!!! When I use Remove Simlock I get this error ACTION: Unlock Phone. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140 Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys Serial number: LA051843001456 IMEI 1: 358074095529676 IMEI 2: 358074095610476 BT: 44D3AD348517 WIFI: 44D3AD346587 Reading simlock, wait.... [USER]Simlock Status: UNLOCKED [0]Simlock Type: 0 0 Saved to: C:\Users\GB\Documents\spreadtrum_module\backup\spd _simlock_nvram_backup\358074095529676__W_K120SUN_u ser_8_1_0_OPM2_171019_012_1536724428_release_keys_ LA051843001456\ This simlock type is not supported yet. Abort opperation. Done. Can You do update please for this version?? Thanks in advance BR Goran

02-08-2019, 18:24	#15 (permalink)
farhanu Junior Member Join Date: Feb 2015 Posts: 38 Member: 2346573 Status: Offline Thanks Meter: 6	good update we more waiting fast unlocking team