Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[GSM.WIZARD]

Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[22]Detected: MediaTek PreLoader USB VCOM (Android) (COM22)
\\?\usb#vid_0e8d&pid_2000#6&1ebcc5fd&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[26]META Port Detected: USB Serial Device (COM26)
USB\VID_17EF&PID_74ED&MI_02\7&18E7C52D&0&0002
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6752,S01
[AP]APP_VER: alps-mp-m0.mp1-V2.39_lenovo6752.65.m
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6752, E00
[META]SW_VER : K50T5.M.LTG.V7
[META]HW_VER : LENOVO6752_65_M_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 866046024234813
Phone imei[1] : 866046024234813
IMEI to repair: [2] 866046024234821
Phone imei[2] : 866046024234821
Clean Boot flag ok.
All done.

[sajid01913]

Factory Reset Done Huawei Y3II

Action : Reset to factory default.
Selected Model: Huawei:Ascend Y3 II[LUA-U22]
Exe version: NCKDongle AndroidMTK 2.5.8.2
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[194]Detected: PreLoader USB VCOM Port (COM194)
\\?\usb#vid_0e8d&pid_2000#us89rghyi7krcikz#{a5dcbf 10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[409]META Port Detected: MediaTek USB VCOM (Android) (COM409)
USB\VID_0E8D&PID_2007\6&8CA65F9&0&2
Start sync target, waiting responce.....
Resetting phone, wait....
Resetting phone step 2, wait....
Reset to factory default ok.
All done.

[sajid01913]

Huawei Y3II FRP Reset Done!!!

Exe version: NCKDongle AndroidMTK 2.5.8.2
Selected model: Ascend Y3 II[LUA-U22]
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM194)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

[georgebz]

ZTE BLADE L110 Removing frp

EXE: NckDongle Spreadtrum Module 0.5
SELECTED: SC7731G_EMMC 5.x
ACTION: Reset FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM29)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Reconnecting phone...
Detected: SCI USB2Serial (COM29)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: ZTE
Hardware: SP7731GEA_V1.0.0
Platform: sc8830
Board: sp7731gea
Build Id: LMY47D
Model: ZTE BLADE L110
Android Release: 5.1
Android Version: ORA_RO_QB18D_L110V1.0.4
IMEI 1: 862945039------
IMEI 2: 862945039------
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Removing frp, wait...
Format OK.
Total Time: 00:00:28
Done.

[GSM.WIZARD]

Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM208)
MODEL FROM PROINFO: 9008X-2ATWIE1
SECRO FROM PROINFO: X3F0CP03CK00
OTP IMEI: 354983080494247
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Locked (remain:10)
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Locked (remain:10)
Block4(C): Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
All done.

[sajid01913]

Huawei Y5II Factory Reset Done!!!

Action : Reset to factory default.
Selected Model: Huawei:Ascend Y5 II[CUN-U29]
Exe version: NCKDongle AndroidMTK 2.5.8.2
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[156]Detected: MediaTek PreLoader USB VCOM (Android) (COM156)
\\?\usb#vid_0e8d&pid_2000#6&8ca65f9&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[409]META Port Detected: MediaTek USB VCOM (Android) (COM409)
USB\VID_0E8D&PID_2007\6&8CA65F9&0&2
Start sync target, waiting responce.....
Resetting phone, wait....
Resetting phone step 2, wait....
Reset to factory default ok.
All done.

[sajid01913]

Huawei Y5II FRP Reset Done!!!

Exe version: NCKDongle AndroidMTK 2.5.8.2
Selected model: Ascend Y5 II[CUN-U29]
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM156)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E3132 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

[GSM.WIZARD]

USB Connection selected.
EXE VERSION: NCKBox MTK Tool 4.0
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM373
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 356124051489431
IMEI[2]: 356124051489431
Start read, wait....
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

[rasgula]

G7 L03 unlock

Phone must be on, USB debugging must be enabled.
If Phone ask for SU, allow.
Found Device, reading info..
Brand:  Huawei
Model:  HUAWEI G7-L03
Build ID:  HuaweiG7-L03
Platform ID:  msm8916
OS version:  4.4.4
Build version:  G7-L03V100R001C113B277
SU binary present.
Starting unlock, wait...
Using metod 3.
Reading simlock info, wait....
SIMLOCK[0]: Locked
SIMLOCK[1]: Unlocked
SIMLOCK[2]: Unlocked
Unlocking phone....
Write simlock succes.


Restarting phone, wait.....
If phone not restarted, please restart manually .
All done.

[salekborhan]

MT6580__RX-1__RX-1__RX-1__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29
download firmware here without password: https://drive.google.com/uc?id=1V3CW...xport=download

[zvrrr]

Selected : GT-I8190
Searching for phone, wait....
PHONE LCD must be on.
If phone ask for SU, please allow.
If phone ask for auth please confirm.
MODEL : GT-I8190
BOARD ID : DB8520H
PLATFORM ID : montblanc
OS VERSION : 4.1.2
BUILD ID : JZO54K
BUILD DATE : SunApr21153949KST2013
BUILD VERSION : JZO54K.I8190XXAMD3
SOFTWARE VERSION : I8190XXAMD3
Phone Subscriber Info:
Phone Type = GSM
Device ID = 354916051091840

(GSM)RIL VERSION : SamsungRIL(IPC)v2.0
(GSM)BASEBAND : I8190XXAMD3
(RIL)SERIAL NUMBER : RF1CC19T7BL
(RIL)SW VERSION : I8190XXAMD3
Checking SU: True
Checking Root access: True
Unlocking,wait...
Starting AT, wait..
Bypassing MSL, wait.
If phone ask for code use 11111111.
Unlock Done, Restarting Phone!
Total Time: 00:00:28
--------------------------
Log saved to: C:\Users\Zvr\Documents\nck_samsung\logs\GT-I8190_unlock__5.txt

[razib143]

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: MT6580
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM81)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) KSI 0x454838454134
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045483845 : 000000000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
IMEI[1]: 35823507771AAA3
IMEI[2]: 35823507790AAA0
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

[ibrajinja]

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.8.2
Selected model: MT6572_EMMC
Action: Unlock
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[13]Detected: MediaTek PreLoader USB VCOM (Android) (COM13)
\\?\usb#vid_0e8d&pid_2000#5&1f775297&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: MediaTek USB VCOM (Android) (COM19)
USB\VID_0E8D&PID_2007\5&1F775297&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6572,S01
[AP]APP_VER: ALPS.KK1.MP7.V1.7
[META]BaseBand CPU : MT6572, E01
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V47.P5
[META]HW_VER : HEXING72_CWET_KK_HSPA_HW
Phone imei[1] : 359767058042350
Phone imei[2] : 359767058144859
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done.

[sajid01913]

Symphony P7 PRO Read Firmware Done

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM156)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 15010052453142 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Build ID: MRA58K
Display ID: P7PRO_HW1_V10
Version: 6.0
Build Date: Wed Jul 26 15:46:35 CST 2017
Model: Symphony P7 PRO
Brand: Symphony
Device: P7_PRO
Manufacturer: Symphony
Mediatek Version Release: B3698_DB36981_SYMPHONY-P7-PRO_L107
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 357228080434257
IMEI[2] from NVRAM: 357228080484260
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start procesing trustzone
Start procesing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xb000000 - LEN: 0xbb800000
Saved to : C:\Users\Amit\Documents\Android_MTK\firmware_backu p\MT6737M_EMMC_Symphony_Symphony P7 PRO_6_0_B3698_DB36981_SYMPHONY-P7-PRO_L107(2017_11_25_12_37)
Wait untill phone will start charging.
All done.

[sajid01913]

Walton RM3 factory default done!!!

Action : Reset to factory default.
Selected Model: 0-By CPU:MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.8.2
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[156]Detected: MediaTek PreLoader USB VCOM (Android) (COM156)
\\?\usb#vid_0e8d&pid_2000#6&8ca65f9&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[409]META Port Detected: MediaTek USB VCOM (Android) (COM409)
USB\VID_0E8D&PID_2007\6&8CA65F9&0&2
Start sync target, waiting responce.....
Resetting phone, wait....
Resetting phone step 2, wait....
Reset to factory default ok.