Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 476 - GSM-Forum

sajid01913 · 04-02-2019, 07:27

Symphony V110 FRP Remove Done

EXE: NckDongle Spreadtrum Module 0.8
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Symphony
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731cea
Build Id: MRA58K
Model: V110
Android Release: 6.0
Android Version: V110_HW1_V11
Country: US
Removing frp, wait...
Format OK.
Total Time: 00:00:36
Done.

DupleX · 04-03-2019, 15:28

Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:ZY322FF4QH
Model: Moto G (5)
Platform Id: msm8937
OS Version: 8.1.0
Build Id: OPPS28.85-13-2
Build version: OPPS28.85-13-2
(GSM)RIL VERSION: Qualcomm RIL 1.0
Resetting FRP, wait....
Reset Done.

thanks for the good work

marcelofigado · 04-04-2019, 14:26

Exe version: NCKDongle AndroidMTK 2.5.9.9
Selected model: Alcatel OT-5033J
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM15)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Loading Custom Preloader
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100464E3632 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Phone have OTP partition.
MODEL FROM PROINFO: 5033J-PATLBR1
SECRO FROM PROINFO: X7L0QP02CT20
OTP IMEI: 356XXXXXXXXXXXX
Starting alcatel helio frp, not disconnect phone untill done
[HELIO]Format partition, please wait...
[0]FRP Reset Done.
[HELIO]Format partition, please wait...
[1]FRP Reset Done.
[HELIO]Format partition, please wait...
[2]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done

sajid01913 · 04-04-2019, 17:02

Itel A16 Plus FRP Remove Done

EXE: NckDongle Spreadtrum Module 0.8
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Custom loader: itel a16.loader
Start Detect phone...
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Removing frp, wait...
Format OK.
Total Time: 00:00:14
Done.

frankcelular1 · 04-05-2019, 22:25

EXE: NckBox Spreadtrum Module 0.8
SELECTED: ZTE L110
ACTION: Erase FRP
Start Detect phone...
Detected: SCI USB2Serial (COM61)
Sending loader, keep boot key untill loader start.
Reconnecting .
Detected: SCI USB2Serial (COM61)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: ZTE
Hardware: SP7731GEA_V1.0.0
Platform: sc8830
Board: sp7731gea_gollumarlin
Build Id: LMY47D
Model: ZTE Blade L110
Android Release: 5.1
Android Version: ATT_MX_QB25S_L110V1.0.2
Removing frp, wait...
Format OK.
Total Time: 00:00:10
Done.

fokal2008 · 04-07-2019, 14:41

HUAWEI Y360-U31 UNLOCK DONE

fokal2008 · 04-07-2019, 14:44

ITEL S32 LITE FRP RESET DONE

fokal2008 · 04-07-2019, 14:46

ITEL S31 FLASHING OK

sajid01913 · 04-10-2019, 07:47

OPPO F1s FRP Remove Done

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: OPPO F1S
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek USB Port (COM14)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6755 1 cb00
Using Algo 3.
Helio MT6755 phone detected, swithing to helio api
Loading Custom Preloader
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6755
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 13014E51334A39 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

frankcelular1 · 04-10-2019, 21:44

Exe version: NCKBox AndroidMTK 1.8.9.9
Selected model: Alcatel OT-5041C
Action: Unlock
Will be used database connection.
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[253]Detected: MediaTek USB Port (COM253)
\\?\usb#vid_0e8d&pid_0003#6&2895f386&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[463]META Port Detected: MediaTek USB VCOM (Android) (COM463)
USB\VID_0E8D&PID_200E&MI_01\7&2121549E&0&0001
ChipID: MT6739,S01
Using Algo 5.
Starting META using port[COM463], wait...
BaseBand CPU : MT6739
MODEM SW Version : MOLY.LR12A.R3.MP.V10.3.P8
MODEM HW Version : TK_MD_L4_HW
IMEI location: OTP
IMEI[1] : 015163001z
IMEI[2] : 000000000000000
Loading database ok
[1]Reading simlock info:

Block1(N): Locked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[1]Unlocking target, wait

Direct Unlock Done.
[2]Reading simlock info:

Block1(N): Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2]Unlocking target, wait

Direct Unlock Done.
[0]All done.

jeilyscell · 04-11-2019, 00:49

w377
PHONE: Qualcomm Generic
Exe Version: NckDongle Qualcomm Module 0.12.5
Port: REACH Android Diag 7A01 (COM140)
Build id: 76XXU-UDMCKOLYM-11452303
Compile Date: Oct 23 2013
Compile time: 19:21:38
Release date: Jun 12 2012
Release time: 02:00:00
IMEI: ***********
SECOND IMEI: *****************
IMEI 1 for repair: **************
Reading imei.
IMEI: *************
IMEI 2 for repair: ****************
Reading imei.
SECOND IMEI: *************
If phone not restart, restart phone manually.
Without removing usb.
Done.

amko · 04-11-2019, 10:18

Exe version: NCKDongle AndroidMTK 2.5.9.8
Selected model: 0-By CPU MT6735
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x513858534142
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 150100513858534142 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

iAnell87 · 04-11-2019, 19:39

ACTION: Unlock Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys
Serial number: LA051843004766
IMEI 1: 35807409xxxxxxxxx
IMEI 2: 358074095xxxx
BT: 44D3AD34xxxxxx0
WIFI: 44D3xxxxxxx6470
Reading simlock, wait....

[0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10]
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 88190863
Sim 2 Unlock Code: 88191743
Warning, this is factory key, some opperators can modify factory key.
Saved to: C:\Users\AnellK\Documents\spreadtrum_module\backup \spd_simlock_nvram_backup\358074xxxxxxx6888__W_K12 0SUN_user_8_1_0_OPM2_171019_012_1536724428_release _keys_LA051843004766\
Writing simlock...
Writing simlock ok
Done.

sultan_gsm · 04-12-2019, 17:13

Karbonn K9 Smart 4G Indus Flashed Success
Flash files count is :13
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.9
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM21)
Backup preloader saved in firmware directory.
[2]FORMAT - BEGIN: 0x4f80000 - LEN: 0x80000
[2]FORMAT - BEGIN: 0x6b00000 - LEN: 0x2000000
[2]FORMAT - BEGIN: 0xb0000000 - LEN: 0x19000000
[2]FORMAT - BEGIN: 0xb0000000 - LEN: 0x19000000
[2]FORMAT - BEGIN: 0xc9000000 - LEN: 0x107f80000
Starting flash.
Send preloader...
Wait untill phone will start charging.
[0]All done.

core17 · 04-13-2019, 09:08

Thank you sir .works perfect on NCK dongle.

04-03-2019, 15:28	#7127 (permalink)
DupleX Freak Poster Join Date: Apr 2002 Location: Sofia Age: 48 Posts: 152 Member: 10948 Status: Offline Thanks Meter: 14	moto xt1676 remove frp Phone must be on, USB debugging must be enabled. If Phone ask,accept authorization on screen. Found Device:ZY322FF4QH Model: Moto G (5) Platform Id: msm8937 OS Version: 8.1.0 Build Id: OPPS28.85-13-2 Build version: OPPS28.85-13-2 (GSM)RIL VERSION: Qualcomm RIL 1.0 Resetting FRP, wait.... Reset Done. thanks for the good work

04-05-2019, 22:25	#7130 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	ZTE L110 frp success EXE: NckBox Spreadtrum Module 0.8 SELECTED: ZTE L110 ACTION: Erase FRP Start Detect phone... Detected: SCI USB2Serial (COM61) Sending loader, keep boot key untill loader start. Reconnecting . Detected: SCI USB2Serial (COM61) Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: ZTE Hardware: SP7731GEA_V1.0.0 Platform: sc8830 Board: sp7731gea_gollumarlin Build Id: LMY47D Model: ZTE Blade L110 Android Release: 5.1 Android Version: ATT_MX_QB25S_L110V1.0.2 Removing frp, wait... Format OK. Total Time: 00:00:10 Done.

04-07-2019, 14:41	#7131 (permalink)
fokal2008 No Life Poster Join Date: Jan 2009 Location: cameroon Posts: 1,773 Member: 953931 Status: Offline Sonork: 1652252 Thanks Meter: 897	huawei y360-u31 unlock network done HUAWEI Y360-U31 UNLOCK DONE

04-10-2019, 21:44	#7135 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	5041C unlock success Exe version: NCKBox AndroidMTK 1.8.9.9 Selected model: Alcatel OT-5041C Action: Unlock Will be used database connection. Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [253]Detected: MediaTek USB Port (COM253) \\?\usb#vid_0e8d&pid_0003#6&2895f386&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [463]META Port Detected: MediaTek USB VCOM (Android) (COM463) USB\VID_0E8D&PID_200E&MI_01\7&2121549E&0&0001 ChipID: MT6739,S01 Using Algo 5. Starting META using port[COM463], wait... BaseBand CPU : MT6739 MODEM SW Version : MOLY.LR12A.R3.MP.V10.3.P8 MODEM HW Version : TK_MD_L4_HW IMEI location: OTP IMEI[1] : 015163001z IMEI[2] : 000000000000000 Loading database ok [1]Reading simlock info: Block1(N): Locked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [1]Unlocking target, wait Direct Unlock Done. [2]Reading simlock info: Block1(N): Unlocked Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [2]Unlocking target, wait Direct Unlock Done. [0]All done.

04-11-2019, 00:49	#7136 (permalink)
jeilyscell Freak Poster Join Date: Oct 2007 Location: colombia Posts: 311 Member: 603138 Status: Offline Thanks Meter: 100	w377 PHONE: Qualcomm Generic Exe Version: NckDongle Qualcomm Module 0.12.5 Port: REACH Android Diag 7A01 (COM140) Build id: 76XXU-UDMCKOLYM-11452303 Compile Date: Oct 23 2013 Compile time: 19:21:38 Release date: Jun 12 2012 Release time: 02:00:00 IMEI: ********* SECOND IMEI: ************* IMEI 1 for repair: ********** Reading imei. IMEI: ********* IMEI 2 for repair: ************ Reading imei. SECOND IMEI: *********** If phone not restart, restart phone manually. Without removing usb. Done. Last edited by jeilyscell; 04-11-2019 at 00:57.

04-02-2019, 07:27	#7126 (permalink)
sajid01913 No Life Poster Join Date: Jul 2008 Location: Bangladesh Posts: 1,255 Member: 821462 Status: Offline Thanks Meter: 833	Symphony V110 FRP Remove Done EXE: NckDongle Spreadtrum Module 0.8 SELECTED: SC7731C_EMMC ACTION: Erase FRP Start Detect phone... Detected: SPRD U2S Diag (COM7) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. FileSystem: EMMC Manufacturer: Symphony Hardware: SP7731C_V1.0.0 Platform: sc8830 Board: sp7731cea Build Id: MRA58K Model: V110 Android Release: 6.0 Android Version: V110_HW1_V11 Country: US Removing frp, wait... Format OK. Total Time: 00:00:36 Done.

04-04-2019, 14:26	#7128 (permalink)
marcelofigado Freak Poster Join Date: May 2016 Location: BRAZIL Posts: 239 Member: 2578528 Status: Offline Thanks Meter: 139	Exe version: NCKDongle AndroidMTK 2.5.9.9 Selected model: Alcatel OT-5033J [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM15) Boot mode: Brom Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 5. Helio MT6739 phone detected, swithing to helio api Loading Custom Preloader Helio enabled DRAM in First Da: TRUE BBCHIP MT6739 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100464E3632 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Phone have OTP partition. MODEL FROM PROINFO: 5033J-PATLBR1 SECRO FROM PROINFO: X7L0QP02CT20 OTP IMEI: 356XXXXXXXXXXXX Starting alcatel helio frp, not disconnect phone untill done [HELIO]Format partition, please wait... [0]FRP Reset Done. [HELIO]Format partition, please wait... [1]FRP Reset Done. [HELIO]Format partition, please wait... [2]FRP Reset Done. [helio]Wait untill phone will start charging. [0]All done

04-04-2019, 17:02	#7129 (permalink)
sajid01913 No Life Poster Join Date: Jul 2008 Location: Bangladesh Posts: 1,255 Member: 821462 Status: Offline Thanks Meter: 833	Itel A16 Plus FRP Remove Done EXE: NckDongle Spreadtrum Module 0.8 SELECTED: SC7731C_EMMC ACTION: Erase FRP Custom loader: itel a16.loader Start Detect phone... Detected: SPRD U2S Diag (COM7) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. Removing frp, wait... Format OK. Total Time: 00:00:14 Done.

04-07-2019, 14:44	#7132 (permalink)
fokal2008 No Life Poster Join Date: Jan 2009 Location: cameroon Posts: 1,773 Member: 953931 Status: Offline Sonork: 1652252 Thanks Meter: 897	ITEL S32 LITE FRP RESET DONE

04-07-2019, 14:46	#7133 (permalink)
fokal2008 No Life Poster Join Date: Jan 2009 Location: cameroon Posts: 1,773 Member: 953931 Status: Offline Sonork: 1652252 Thanks Meter: 897	ITEL S31 FLASHING OK

04-10-2019, 07:47	#7134 (permalink)
sajid01913 No Life Poster Join Date: Jul 2008 Location: Bangladesh Posts: 1,255 Member: 821462 Status: Offline Thanks Meter: 833	OPPO F1s FRP Remove Done Exe version: NCKDongle AndroidMTK 2.5.9.8 Selected model: OPPO F1S [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Keep VOL+ button untill inserting USB cable. Detected : MediaTek USB Port (COM14) Boot mode: Brom Phone detected...Please wait BBCHIP: 6755 1 cb00 Using Algo 3. Helio MT6755 phone detected, swithing to helio api Loading Custom Preloader Helio enabled DRAM in First Da: TRUE BBCHIP MT6755 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 13014E51334A39 : 000000000000000000 EMMC UA SIZE: 0x747c00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x748800000 [29.133 GB] Checking data, wait... Writing FRP, wait... FRP Reset Done. [helio]Wait untill phone will start charging. [0]All done.

04-11-2019, 10:18	#7137 (permalink)
amko Freak Poster Join Date: Jul 2006 Location: Serbia Age: 46 Posts: 127 Member: 303852 Status: Offline Thanks Meter: 32	lenovo tab 2 A8-50LC FRP Exe version: NCKDongle AndroidMTK 2.5.9.8 Selected model: 0-By CPU MT6735 [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM (Android) (COM3) Boot mode: Preloader BBCHIP: 321 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6735 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x513858534142 EMMC FW VERSION: 05:00:00:00:00:00:00:00 EMMC CID: 150100513858534142 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Checking data, wait... Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. [0]All done.

04-11-2019, 19:39	#7138 (permalink)
iAnell87 No Life Poster Join Date: Feb 2016 Location: BA Posts: 503 Member: 2531176 Status: Offline Thanks Meter: 225	wiko sunny 3 unlock ACTION: Unlock Phone. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Platform Version MOCORTM_17C_W18.23.4_P2_DebugProject Version pike2_pubBASE Version FM_BASE_17C_W18.23.4_P2HW Version sc7731e_modem06-20-2018 111140 Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1536724428 release-keys Serial number: LA051843004766 IMEI 1: 35807409xxxxxxxxx IMEI 2: 358074095xxxx BT: 44D3AD34xxxxxx0 WIFI: 44D3xxxxxxx6470 Reading simlock, wait.... [0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10] [3]Simlock Type: 0 0 Sim 1 Unlock Code: 88190863 Sim 2 Unlock Code: 88191743 Warning, this is factory key, some opperators can modify factory key. Saved to: C:\Users\AnellK\Documents\spreadtrum_module\backup \spd_simlock_nvram_backup\358074xxxxxxx6888__W_K12 0SUN_user_8_1_0_OPM2_171019_012_1536724428_release _keys_LA051843004766\ Writing simlock... Writing simlock ok Done.

04-12-2019, 17:13	#7139 (permalink)
sultan_gsm Junior Member Join Date: Nov 2018 Location: Earth Age: 36 Posts: 24 Member: 2878734 Status: Offline Thanks Meter: 2	Karbonn K9 Smart 4G Indus Flashed Success Flash files count is :13 Action : Firmware update. Selected Model: 0-By CPU: ELBRUS Exe version: NCKDongle AndroidMTK 2.5.9.9 Scenario: [1]Full Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM10) Boot mode: Preloader BBCHIP: 335 0 ca00 Using Algo 2. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6737M BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 150100464E58324D42 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM21) Backup preloader saved in firmware directory. [2]FORMAT - BEGIN: 0x4f80000 - LEN: 0x80000 [2]FORMAT - BEGIN: 0x6b00000 - LEN: 0x2000000 [2]FORMAT - BEGIN: 0xb0000000 - LEN: 0x19000000 [2]FORMAT - BEGIN: 0xb0000000 - LEN: 0x19000000 [2]FORMAT - BEGIN: 0xc9000000 - LEN: 0x107f80000 Starting flash. Send preloader... Wait untill phone will start charging. [0]All done.

04-13-2019, 09:08	#7140 (permalink)
core17 Junior Member Join Date: Sep 2013 Posts: 2 Member: 2015711 Status: Offline Sonork: popongsky Thanks Meter: 0	Thank you sir .works perfect on NCK dongle.