Tecno Camon CM frp done [SUCCESS REPORT] ★★★★★ - GSM-Forum

skidotech · 03-22-2018, 20:59

Exe version: NCKBox AndroidMTK 1.8.8.4
Selected model: MT6571_EMMC
Action: Reset FRP
Will be used loader: ca6 DA file .bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 15010051453633 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.

Boot info
https://s14.postimg.org/74iv5300h/Untitled.png

MimiTena · 03-28-2018, 06:30

Quote:

Originally Posted by skidotech

Exe version: NCKBox AndroidMTK 1.8.8.4
Selected model: MT6571_EMMC
Action: Reset FRP
Will be used loader: ca6 DA file .bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 15010051453633 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.

Boot info
https://s14.postimg.org/74iv5300h/Untitled.png

Can you share DA file you use?

skidotech · 03-28-2018, 09:21

For security it can not be shared like that but am pleading on behalf of nck team to provide where we will be uploading file like Da files only nck user

UNL0CKSURE · 04-03-2018, 12:37

tryied lot of time... phone not connect to pc... can you share DA file

nduka · 04-03-2018, 20:01

Quote:

Originally Posted by UNL0CKSURE

tryied lot of time... phone not connect to pc... can you share DA file

I think you can't write DA file when system not recognizing USB port
So why asking for file?

**orbita** · 04-03-2018, 20:08

Quote:

Originally Posted by skidotech

For security it can not be shared like that but am pleading on behalf of nck team to provide where we will be uploading file like Da files only nck user

You can send me link directly in pm, and will add in exe.

hotech · 04-11-2018, 19:13

Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: ELBRUS
Action: Reset FRP
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

hotech · 04-18-2018, 14:00

Hello
Decided to share the link with you
Link here

Password: HOTechCMMTKDA10

Pres thanks

03-22-2018, 20:59	#1 (permalink)
skidotech Insane Poster Join Date: Jan 2017 Location: LAGOS NIGERIA Posts: 84 Member: 2669023 Status: Offline Thanks Meter: 17	Tecno Camon CM frp done [SUCCESS REPORT] ★★★★★ Exe version: NCKBox AndroidMTK 1.8.8.4 Selected model: MT6571_EMMC Action: Reset FRP Will be used loader: ca6 DA file .bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM5) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... Using Algo 2. ---------------------------------------------------- BaseBand CPU :MT6737T BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 15010051453633 : 000000000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone will start charging. Boot info https://s14.postimg.org/74iv5300h/Untitled.png Last edited by skidotech; 03-22-2018 at 21:01. Reason: Miss spell

04-18-2018, 14:00	#8 (permalink)
hotech Freak Poster Join Date: Nov 2010 Location: Cameroon Posts: 166 Member: 1433726 Status: Offline Sonork: 100.1644838 Thanks Meter: 106	Hello Decided to share the link with you Link here Password: HOTechCMMTKDA10 Pres thanks Last edited by hotech; 04-18-2018 at 14:10.

03-28-2018, 09:21	#3 (permalink)
skidotech Insane Poster Join Date: Jan 2017 Location: LAGOS NIGERIA Posts: 84 Member: 2669023 Status: Offline Thanks Meter: 17	For security it can not be shared like that but am pleading on behalf of nck team to provide where we will be uploading file like Da files only nck user

04-03-2018, 12:37	#4 (permalink)
UNL0CKSURE Freak Poster Join Date: Feb 2018 Location: New Zealand Posts: 222 Member: 2810585 Status: Offline Thanks Meter: 198	tryied lot of time... phone not connect to pc... can you share DA file

04-11-2018, 19:13	#7 (permalink)
hotech Freak Poster Join Date: Nov 2010 Location: Cameroon Posts: 166 Member: 1433726 Status: Offline Sonork: 100.1644838 Thanks Meter: 106	Exe version: NCKBox AndroidMTK 1.8.8.8 Selected model: ELBRUS Action: Reset FRP Will be used loader: MTK_AllInOne_DA_SP.bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM5) Boot mode: Preloader Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6737T BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100514536334D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM10) -Reading GPT Drive OK Checking data, wait... Erasing FRP, wait... FRP Reset Done. Wait untill phone will start charging. All done.