wiko tommy 3 invalid imei
 

Selected connection metod: Adb connection
Exe version: NCKBox AndroidMTK 2.1
Selected phone: Wiko Darkmoon
Action : IMEI REPAIR.
IMEI[1] for write : 123456789123456
IMEI[2] for write : 123456789012345
Repair IMEI Start.
Phone lcd must be on and unlocked.
If ask for SU acces, accept it.
Device have root
"/data/local/tmp/expl": error: only position independent executables (PIE) are supported.

ADB mode is used for old cpu, for new cpu you can use meta or spmeta metod.
For new helio cpu MT6739 and above must be used database metod.

so does that mean not supported
 

Selected connection metod: Meta Connection
Exe version: NCKBox AndroidMTK 2.1
Selected phone: MT6739
Action : IMEI REPAIR.
IMEI[1] for write : 123456789123456
IMEI[2] for write : 123456789012345
Scanning for presents meta ports...
Detected(977) : MediaTek USB VCOM (Android) (COM977)
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6739,S01
[AP]APP_VER: alps-mp-n1.mp18-V1_tinno6739.35.n1_P47
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V1.P47
[META]HW_VER : TINNO6739_65_N1_HW
Meta mode conected ok, start reading phone....
Error get imei handle or phone not supported!!
[0]All done.

Read please again slow and carefully my repply.
You specially select only incompatible metods with for your phone?
And ignore my repply seems.:confused:

spmeta and the previous was meta mode
 

Selected connection metod: SpMeta Connection
Exe version: NCKBox AndroidMTK 2.1
Selected phone: MT6739
Action : IMEI REPAIR.
IMEI[1] for write : 123456789123456
IMEI[2] for write : 123456789012345
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[36]Detected: MediaTek PreLoader USB VCOM (Android) (COM36)
\\?\usb#vid_0e8d&pid_2000#5&ea77e6&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[72]META Port Detected: MediaTek USB VCOM (Android) (COM72)
USB\VID_0E8D&PID_2007\5&EA77E6&0&1
Start sync target, waiting responce.....
ChipID: MT6739,S01
Using Algo 5.
Brand: WIKO
Board: unknown
Model: W_K600
Name: W_K600
Release: alps-mp-n1.mp18-V1_tinno6739.35.n1_P47
Version: 7.1.1
Platform: MT6739
Error while backup nvram: Communication through either RS232 or IPC error.
[0]All done.

any chance to get nvram database file for wiko tommy 3

It also come together with factory firmware in mostly phones.
Also it exists in vendor or system partition directly.
If you rooted phone, you can get this file also directly from phone.

P.S.
Database file uploaded in support.

thanks
 

Selected connection metod: Meta Connection
Exe version: NCKBox AndroidMTK 2.1
Selected phone: MT6739
Action : IMEI REPAIR.
IMEI[1] for write : 356251090802439
IMEI[2] for write : 356251090962431
Will be used database connection.
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[27]Detected: MediaTek PreLoader USB VCOM (Android) (COM27)
\\?\usb#vid_0e8d&pid_2000#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[134]META Port Detected: MediaTek USB VCOM (Android) (COM134)
USB\VID_0E8D&PID_2007\6&18D0524&0&5
ChipID: MT6739,S01
Using Algo 5.
Starting META using port[COM134], wait...
ERROR[39]:[NVRAM] MAUI and DB is INCONSISTENT
BaseBand CPU : MT6739
MODEM SW Version : MOLY.LR12A.R2.MP.V1.P47
MODEM HW Version : TINNO6739_65_N1_HW
IMEI location: FAT
IMEI[1] : 323353565335539
IMEI[2] : 336344446447747
[1]Reading imei info:

Writing imei[1] : 356251090802439
Readed imei[1] : 356251090802439
[2]Reading imei info:

Writing imei[2] : 356251090962431
Readed imei[2] : 356251090962431
[0]All done.