GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > NCK Team products > NCK Box Premium v2

Reply
 
LinkBack Thread Tools Display Modes
Old 09-04-2018, 14:00   #1 (permalink)
No Life Poster
 
bright hlatini's Avatar
 
Join Date: Jul 2011
Location: malawi
Posts: 1,121
Member: 1614640
Status: Offline
Thanks Meter: 468
...::::world first sq smart n1 6.0 read info and firmware done [USER REPORT] ★★★★★


Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.3
Will be used loader: DAxxxxxx.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
This phone have FRP partition.
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_1xxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_xxx
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_1xxxx
IMEI[1]: 355xxxxxxxxxxxx
IMEI[2]: 355xxxxxxxxxxxx
Wait untill phone will start charging.
All done.


Will be used loader: DA_XXXXXXX.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_sq_xxx
Manufacturer: SSTX
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxxx
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355xxxxxxxxxx
IMEI[2] from NVRAM: 355xxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing teksunhw ......
Reading: BEGIN: 0xa800000 - LEN: 0x100000
Start processing txd ......
Reading: BEGIN: 0xa900000 - LEN: 0xcf00000
Start processing system
Reading: BEGIN: 0x17800000 - LEN: 0x79000000
Saved to : C:\Users\xxxxxxx\Documents\Android_MTK\firmware_ba ckup\MT6580_EMMC_SSTX_N1_6_0_H827W_V1_V_SSTX_S40WV A_SQxxxxxx(2018_09_04_14_46)
Wait untill phone will start charging.
All done.
  Reply With Quote
The Following 2 Users Say Thank You to bright hlatini For This Useful Post:
Old 10-20-2018, 09:52   #2 (permalink)
No Life Poster
 
johnmadzeka1's Avatar
 
Join Date: Apr 2015
Location: Hatfield Harare Zimbabwe
Age: 42
Posts: 923
Member: 2377686
Status: Offline
Sonork: 100.1668474
Thanks Meter: 315
Donate money to this user
Exclamation

Quote:
Originally Posted by bright hlatini View Post
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.3
Will be used loader: DAxxxxxx.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
This phone have FRP partition.
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_1xxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_xxx
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_1xxxx
IMEI[1]: 355xxxxxxxxxxxx
IMEI[2]: 355xxxxxxxxxxxx
Wait untill phone will start charging.
All done.


Will be used loader: DA_XXXXXXX.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_sq_xxx
Manufacturer: SSTX
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxxx
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355xxxxxxxxxx
IMEI[2] from NVRAM: 355xxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing teksunhw ......
Reading: BEGIN: 0xa800000 - LEN: 0x100000
Start processing txd ......
Reading: BEGIN: 0xa900000 - LEN: 0xcf00000
Start processing system
Reading: BEGIN: 0x17800000 - LEN: 0x79000000
Saved to : C:\Users\xxxxxxx\Documents\Android_MTK\firmware_ba ckup\MT6580_EMMC_SSTX_N1_6_0_H827W_V1_V_SSTX_S40WV A_SQxxxxxx(2018_09_04_14_46)
Wait untill phone will start charging.
All done.

How a u Bro what DA Boot did you use ? Please share
  Reply With Quote
Old 10-20-2018, 10:28   #3 (permalink)
No Life Poster
 
johnmadzeka1's Avatar
 
Join Date: Apr 2015
Location: Hatfield Harare Zimbabwe
Age: 42
Posts: 923
Member: 2377686
Status: Offline
Sonork: 100.1668474
Thanks Meter: 315
Donate money to this user
Unhappy

Quote:
Originally Posted by bright hlatini View Post
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.3
Will be used loader: DAxxxxxx.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
This phone have FRP partition.
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_1xxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_xxx
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_1xxxx
IMEI[1]: 355xxxxxxxxxxxx
IMEI[2]: 355xxxxxxxxxxxx
Wait untill phone will start charging.
All done.


Will be used loader: DA_XXXXXXX.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM100)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Build ID: MRA58K
Display ID: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxx_20170405
Version: 6.0
Build Date: 2017年 04月 06日 星期四 00:08:50 CST
Model: N1
Brand: SSTX
Device: h827w_v1_v_sstx_s40wva_sq_xxx
Manufacturer: SSTX
Mediatek Version Release: H827W_V1_V_SSTX_S40WVA_SQ_xxxxxxx
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355xxxxxxxxxx
IMEI[2] from NVRAM: 355xxxxxxxxxx
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing teksunhw ......
Reading: BEGIN: 0xa800000 - LEN: 0x100000
Start processing txd ......
Reading: BEGIN: 0xa900000 - LEN: 0xcf00000
Start processing system
Reading: BEGIN: 0x17800000 - LEN: 0x79000000
Saved to : C:\Users\xxxxxxx\Documents\Android_MTK\firmware_ba ckup\MT6580_EMMC_SSTX_N1_6_0_H827W_V1_V_SSTX_S40WV A_SQxxxxxx(2018_09_04_14_46)
Wait untill phone will start charging.
All done.

Help


Code:
 Exe version: NCKDongle AndroidMTK 2.5.9.3
 Selected model: ELBRUS
 Action: Reset Privacy
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM53)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 First stage DA fail, aborting
 BBCHIP MT6580
 [SECURE BOOT]Not supported by exe or wrongly selected, aborting
 If model is listed, please select correct model
 If model is not listed, use custom DA from phone firmware
 Boot Fail.!!!.
 All done.
  Reply With Quote
Old 10-30-2018, 20:48   #4 (permalink)
Junior Member
 
Join Date: Jan 2016
Location: Zimbabwe
Age: 41
Posts: 25
Member: 2521972
Status: Offline
Thanks Meter: 8
Donate money to this user
What da boot did you use bro
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 08:49.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.17202 seconds with 8 queries

SEO by vBSEO