Micromax a67 all type soloution here by abhayranasingh - GSM-Forum

abhayranasingh · 07-04-2015, 13:23

HELLO
ALL FRIENDS HERE IS MICRIMAX A67 COMPLEAT SOLOUTION

HOW TO MODEFIY USB CABLE TO FLASHING MICROMAX A67
STEP BY STEP PROCESS HERE WITH IMAGE

how to write imei
Write IMEI
(Normal Mode) UserGuide
Version: 1.0.0
DocCode: TOOL-ALL-UG-0013

WriteIMEI tool

1.1 ：

2）Switch on the handset ,connect to the PC with USB data cable , press the “Mode Sel” ,and select the “Normal Mode” , then the “serial COM” would be confirmecd for your mobile.

4,Input the IMEI number then select “write”

Nature of Problem:
After flashing with latest software below issues will occur
1. Display Color Faded
2. Line in display
3. Abnormal Display
4. Having mirror image issue

Solution:
 Two different LCD vendors are available for this model
 After LCD replacement, LCD Specific HW must select while flashing
LCD Identification for HW Selection:
OLD LCD:

Please select Below HW while flashing after above LCD replacement
HW : YXD_Y82917_ILI9806C_45_HSD_SPI_KMO_SH_SHT045382BA_ msg2138a_pa287_KMOEB_A67_HW_info.img

NEW LCD:

Please select Below HW while flashing after above LCD replacement
HW : YXD_Y82917-06_ILI9806C_45_IVO_SPI_KMO_SH_SHT045382BA_msg2138a _pa287_KMOEB_A67_HW_info

For any query or suggestion, kindly write to [email protected] with subject.

abhayranasingh · 07-04-2015, 13:24

How To Upgrade?

1. Intall the driver

“choose the driver of
If your system type is of 32-bits, choose to install the driver of “X86”, Otherwise, choose to install the driver of “X64”, show as below:

Continue to click next,

and you will see this:

this message will pop up for several times, just choose to install this driver anyway! and that’it! After this, you will see the driver is installed successfully!

2. Upgrade/Downlod the SW Before Upgrading, remove the battery and plug it in again(it’s just make sure the cellphone is power off)

Second, the cellphone should be connected to the PC now but not without battery! after that,

you should click “ start”, then insert the battery after clicking the ‘download’ button.And it will be downloading the SW automatically. remind: you have to use the dedicated download cable to download the SW from PC side to the cellphone
Click this tool to start downloading SW

all credit were going only
moulnisky (S)mod
nokiancare(azam) (mod)
rahul bhutani (mod)

thanx
br
abhayranasingh

Mr.aswani · 07-04-2015, 15:23

can u explain me how dead recover processssss,,,,,,,,,,,,
tried same vers..file already change hw file.......
tried bith tool lcd tool or upgrade tool

shailccna · 07-04-2015, 15:27

can u give the solution of back up nv failed during flashing .whole forum will appericate .

abhayranasingh · 07-05-2015, 08:34

Quote:

Originally Posted by Mr.aswani

can u explain me how dead recover processssss,,,,,,,,,,,,
tried same vers..file already change hw file.......
tried bith tool lcd tool or upgrade tool

flash with og latest and tested flash file
i recover 2 dead handset with og and tested flash file
download from our best support
Welcome to the ./downloads/Micromax/00_A Serie/A67/Software Versions/ folder of GsmHosting support area

if your problem not done so this is hardware problem

thanx
br
abhayranasingh

abhayranasingh · 07-05-2015, 08:38

Quote:

Originally Posted by shailccna

can u give the solution of back up nv failed during flashing .whole forum will appericate .

1st download flash tool our support
Welcome to the ./downloads/Micromax/00_A Serie/A67/Tools/ folder of GsmHosting support area

open flashtool
select pac file in flashtool go option and uncheck all option
then start flashing

thanx
br
abhayranasingh

masusa26 · 07-06-2015, 08:33

Quote:

Originally Posted by abhayranasingh

1st download flash tool our support
Welcome to the ./downloads/Micromax/00_A Serie/A67/Tools/ folder of GsmHosting support area

open flashtool
select pac file in flashtool go option and uncheck all option
then start flashing

thanx
br
abhayranasingh

please tell us how to uncheck all options ?

abhayranasingh · 07-06-2015, 10:32

Quote:

Originally Posted by masusa26

please tell us how to uncheck all options ?

hello
bro
check here screnshoot how to unchk all option in the flashtool
1.open flash tool then go to the option

you see when you click option yousee there maney option chked like them nv and others

unchk all option and click ok flash normally your handset with modify cable

if your phone have hardware problem then this not work
thanx
br

abhayranasingh

Mr.aswani · 07-07-2015, 09:03

MR.ABHAYRANA SINGH do u know about tools ............
a67 tools r diffrent not 2.9.8004 .....only tool wrking 2.9.7003 or 2.9.7007 for hw file change option .only not any option changes.......

abhayranasingh · 07-07-2015, 10:29

Quote:

Originally Posted by Mr.aswani

MR.ABHAYRANA SINGH do u know about tools ............
a67 tools r diffrent not 2.9.8004 .....only tool wrking 2.9.7003 or 2.9.7007 for hw file change option .only not any option changes.......

i know this alerdy i alerdy all type soloution is on our support moulnisky

dont send any mis use messege

abhayranasingh · 07-07-2015, 13:16

open mircal box
go to android tab 1st adb root
then wipe data done in only few seconds
thanx
br
abhayranasingh

Mr.aswani · 07-08-2015, 13:03

if u know that so next time dont post any doubt full msgs ............
a67 patternlock its too old every new to senior users know about that

abhayranasingh · 07-08-2015, 13:33

plz read post i alerdy tell in subject here is a67 all soloution
so
dont fight

thanx
br
abhayranasingh

devesh tomar · 07-10-2015, 04:47

mr.singh thanks for information but i am not able flash a67 with any tool ,i use windows xp pack 3, tool R 2.9.7003 goes off when i load pac file and R2.9.7007,R2.9.8004 says bin packet virseon not supported, how to solve

abhayranasingh · 07-10-2015, 09:30

Quote:

Originally Posted by devesh tomar

mr.singh thanks for information but i am not able flash a67 with any tool ,i use windows xp pack 3, tool R 2.9.7003 goes off when i load pac file and R2.9.7007,R2.9.8004 says bin packet virseon not supported, how to solve

use the latest flashtool i think this is flashtool problem ya flash file is croupted

UPGRADEDOWNLOAD_R2.9.9015

thanx
br
abhayranasingh

07-04-2015, 13:23	#1 (permalink)
abhayranasingh Cheater -Don't Deal with him- Join Date: May 2015 Location: faridabad(delhi) Age: 33 Posts: 532 Member: 2388887 Status: Offline Sonork: 100.1623070 QQ 3208774531 Thanks Meter: 1,202	Micromax a67 all type soloution here by abhayranasingh HELLO ALL FRIENDS HERE IS MICRIMAX A67 COMPLEAT SOLOUTION HOW TO MODEFIY USB CABLE TO FLASHING MICROMAX A67 STEP BY STEP PROCESS HERE WITH IMAGE how to write imei Write IMEI (Normal Mode) UserGuide Version: 1.0.0 DocCode: TOOL-ALL-UG-0013 WriteIMEI tool 1.1 ： 2）Switch on the handset ,connect to the PC with USB data cable , press the “Mode Sel” ,and select the “Normal Mode” , then the “serial COM” would be confirmecd for your mobile. 4,Input the IMEI number then select “write” Nature of Problem: After flashing with latest software below issues will occur 1. Display Color Faded 2. Line in display 3. Abnormal Display 4. Having mirror image issue Solution:  Two different LCD vendors are available for this model  After LCD replacement, LCD Specific HW must select while flashing LCD Identification for HW Selection: OLD LCD: Please select Below HW while flashing after above LCD replacement HW : YXD_Y82917_ILI9806C_45_HSD_SPI_KMO_SH_SHT045382BA_ msg2138a_pa287_KMOEB_A67_HW_info.img NEW LCD: Please select Below HW while flashing after above LCD replacement HW : YXD_Y82917-06_ILI9806C_45_IVO_SPI_KMO_SH_SHT045382BA_msg2138a _pa287_KMOEB_A67_HW_info For any query or suggestion, kindly write to [email protected] with subject.

07-04-2015, 13:24	#2 (permalink)
abhayranasingh Cheater -Don't Deal with him- Join Date: May 2015 Location: faridabad(delhi) Age: 33 Posts: 532 Member: 2388887 Status: Offline Sonork: 100.1623070 QQ 3208774531 Thanks Meter: 1,202	How To Upgrade? 1. Intall the driver “choose the driver of If your system type is of 32-bits, choose to install the driver of “X86”, Otherwise, choose to install the driver of “X64”, show as below: Continue to click next, and you will see this: this message will pop up for several times, just choose to install this driver anyway! and that’it! After this, you will see the driver is installed successfully! 2. Upgrade/Downlod the SW Before Upgrading, remove the battery and plug it in again(it’s just make sure the cellphone is power off) Second, the cellphone should be connected to the PC now but not without battery! after that, you should click “ start”, then insert the battery after clicking the ‘download’ button.And it will be downloading the SW automatically. remind: you have to use the dedicated download cable to download the SW from PC side to the cellphone Click this tool to start downloading SW all credit were going only moulnisky (S)mod nokiancare(azam) (mod) rahul bhutani (mod) thanx br abhayranasingh Last edited by abhayranasingh; 07-04-2015 at 13:29.

07-07-2015, 13:16	#11 (permalink)
abhayranasingh Cheater -Don't Deal with him- Join Date: May 2015 Location: faridabad(delhi) Age: 33 Posts: 532 Member: 2388887 Status: Offline Sonork: 100.1623070 QQ 3208774531 Thanks Meter: 1,202	micromax a67 1000% patren locked soloution by mircal box open mircal box go to android tab 1st adb root then wipe data done in only few seconds thanx br abhayranasingh

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2015, 15:23	#3 (permalink)
Mr.aswani Freak Poster Join Date: May 2015 Location: rewa (m.P) Posts: 269 Member: 2390782 Status: Offline Sonork: 1661374/lucky Thanks Meter: 311	can u explain me how dead recover processssss,,,,,,,,,,,, tried same vers..file already change hw file....... tried bith tool lcd tool or upgrade tool

07-04-2015, 15:27	#4 (permalink)
shailccna No Life Poster Join Date: Sep 2006 Location: some where in india Posts: 1,306 Member: 350232 Status: Offline Thanks Meter: 207	can u give the solution of back up nv failed during flashing .whole forum will appericate .

07-07-2015, 09:03	#9 (permalink)
Mr.aswani Freak Poster Join Date: May 2015 Location: rewa (m.P) Posts: 269 Member: 2390782 Status: Offline Sonork: 1661374/lucky Thanks Meter: 311	MR.ABHAYRANA SINGH do u know about tools ............ a67 tools r diffrent not 2.9.8004 .....only tool wrking 2.9.7003 or 2.9.7007 for hw file change option .only not any option changes.......

07-08-2015, 13:03	#12 (permalink)
Mr.aswani Freak Poster Join Date: May 2015 Location: rewa (m.P) Posts: 269 Member: 2390782 Status: Offline Sonork: 1661374/lucky Thanks Meter: 311	if u know that so next time dont post any doubt full msgs ............ a67 patternlock its too old every new to senior users know about that

07-08-2015, 13:33	#13 (permalink)
abhayranasingh Cheater -Don't Deal with him- Join Date: May 2015 Location: faridabad(delhi) Age: 33 Posts: 532 Member: 2388887 Status: Offline Sonork: 100.1623070 QQ 3208774531 Thanks Meter: 1,202	plz read post i alerdy tell in subject here is a67 all soloution so dont fight thanx br abhayranasingh

07-10-2015, 04:47	#14 (permalink)
devesh tomar Freak Poster Join Date: May 2012 Posts: 474 Member: 1761266 Status: Offline Thanks Meter: 79	mr.singh thanks for information but i am not able flash a67 with any tool ,i use windows xp pack 3, tool R 2.9.7003 goes off when i load pac file and R2.9.7007,R2.9.8004 says bin packet virseon not supported, how to solve