GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > SIM Solution Products > R-SIM & SAM SIM

Reply
 
LinkBack Thread Tools Display Modes
Old 11-02-2019, 11:27   #1 (permalink)
Product Manager
 
Join Date: Mar 2013
Location: CH
Posts: 1,006
Member: 1907775
Status: Offline
Sonork: 1653265:unlocker
Thanks Meter: 2,085
Instruction For R-SIM15


(Two SIM card two program in one, Two SIM card two program, Freely change to the unlocking mode you need)
Video: https://www.youtube.com/watch?v=nZ3n...ture=*********

Insert SIM Card and R-SIM15 ( wait around 30s), choose relative carrier or press ‘IccidActivation’, input relative ICCID Code, (ICCID should be valid activating code), then choose relative unlocking mode ( usually choose “TMSI MANUAL”)

Choose “Iccid Activation”


Choose unlocking mode


ICCID Setting





Type 1: apply ICCID code activate unlocking operation instruction
TMSI AUTO  Use TMSI auto unlocking Mode ( Suggest this auto unlocking mode)
Insert unlocking card, pop out menu Choose“IccidActivationChoose ”TMSI MANUAL”  Pop out “Input ICCID Menu”( No need to revise ICCID, use default code ) Press Send Pop out “Setup OK”menu, press “Accept”, enter into activate mode  Press Activate  Wait for activating  after activated then choose TMSI AUTO  Mobile will Search signal automatically, following page will appear.


Enter into unlocking mode, then wait for signal to appear. ( It may flashback Shortly when enter into activating mode during this period, as following pic)
Signal appeared at upper Left Corner appeared

Last edited by kinglock; 11-02-2019 at 12:00.
  Reply With Quote
Old 11-02-2019, 11:27   #2 (permalink)
Product Manager
 
Join Date: Mar 2013
Location: CH
Posts: 1,006
Member: 1907775
Status: Offline
Sonork: 1653265:unlocker
Thanks Meter: 2,085
Wait it back to home page

Wait signal to appear (PS: Under this unlocking mode, if appeared “ No Service”, enter into SIM card Application menu and press “Regain SIM Signal” to acquire signal.)

2:TMSI MANUAL MODE  ICCID TMSI MANUAL UNLOCKING MODE
Detailed operation steps please refer to manual unlocking mode video


Then enter into “SIM card Application”, press“Regain SIM Signal” Wait for signal and “3G” symbol appeared, then dial “112” immediately, as following pic:


Dialing 112, do not hang up, pull the card and then insert , waiting for the signa



Type 2 Unlocking Mode: Choose Carrier unlocking instruction ( If ICCID blocked, apply following carrier unlocking way instructions)
  Reply With Quote
Old 11-02-2019, 11:27   #3 (permalink)
Product Manager
 
Join Date: Mar 2013
Location: CH
Posts: 1,006
Member: 1907775
Status: Offline
Sonork: 1653265:unlocker
Thanks Meter: 2,085
TMSI AUTO  Apply to choose carrier TMSI auto unlocking mode

(Detailed operations please refer to auto unlocking mode video instruction)

Insert card, pop out menu,choose carrierChoose TMSI AUTOPop out “input ICCID “ Menu ( No need to revise ICCID, Use default data)  Press” send”  Enter into unlocking mode automatically to unlock,

if activate page appeared, it shows chose wrong carrier, have to choose a correct carrier again

Enter into Unlocking Mode, wait for signal to appear. ( Auto flashback will appear shortly when entered into activate mode during this process, as following pic )
Upper left corner appeared signal



Wait it back to mobile home page

Wait signal to appear. (PS: Under this mode, if “no serve” appeared, enter into SIM card application menu, press “Regain SIM Signal”to acquire signal).
  Reply With Quote
Old 11-02-2019, 11:27   #4 (permalink)
Product Manager
 
Join Date: Mar 2013
Location: CH
Posts: 1,006
Member: 1907775
Status: Offline
Sonork: 1653265:unlocker
Thanks Meter: 2,085
2.TMSI MANUAL MODE  Apply to choose carrier TMSI manual unlocking mode
(Detailed operations please refer to manual unlocking video)
Choose Carrier  Choose TMSI MANUAL  Pop out ICCID input menu ( No need to revise ICCID, use Default )  Press Send mobile enter into following image


Enter into SIM Card application press “Regain SIM Signal” wait signal and “3G” symbol appeared, dial “112” immediately, as following pic

Do not hang up after dialing “112”, Pull out card and insert it, wait for signal to appear.


Type 3 Unlocking Mode: ICCID unlocking mode ( USA use only, perfect unlocking )

Pop out unlocking mode menuā

Choose ICCID UNLOCK  Input Valid ICCID CODE  Moible Power off and then start mobile,activate mobile and wait signal to appear ( USA use only, perfect unlocking )
  Reply With Quote
The Following User Says Thank You to kinglock For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:47.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.22712 seconds with 7 queries

SEO by vBSEO