No Service RSIM8+ Sprint iPhone 4S iOS 7.0.1 - GSM-Forum

twsim · 10-03-2013, 02:07

Hello,

I received my R-SIM8+ today and have been unable to get it working. I am using a new (cut) Straight Talk (AT&T) SIM. I initially inserted the R-SIM+SIM, but the phone did not detect the SIM. I then installed the iR0seTool following the directions on the rsim5 site.

After completing these steps, the phone was then able to detect the SIM when inserted. When the menu popped up, I selected "MODE1 FOR ios6 i4S", then "US Sprint". This appeared to complete successfully and I then restarted the phone.

The phone now shows "No Service". I then went through the entire process again, with a "real" AT&T nano SIM and also receive no service. Both SIMs work fine in my Nexus 4 with a nano-to-micro adapter.

I do not have any more SIMs and cannot get the menu (where I selected MODE1) to come back up. I'm not sure what to try next. Thank you.

LuizinhoMN · 10-03-2013, 05:08

It takes about five minutes to sign appears, you're waiting for that time?

twsim · 10-03-2013, 09:53

Yes, I have waited 10+ minutes. The only thing that I've seen happen after some amount of time is that the phone shows a message that it could not be activated.

ogel2 · 10-03-2013, 10:00

Quote:

Originally Posted by twsim

Yes, I have waited 10+ minutes. The only thing that I've seen happen after some amount of time is that the phone shows a message that it could not be activated.

so the problem is your phone is not active yet. try resetting your rsim and use manual imsi .

imran4u5 · 10-03-2013, 10:19

try with different sim! it will work

try to use a uncut sim
good luck
cheers

twsim · 10-03-2013, 21:56

I have tried with 3 sims, including one uncut sim. I do not have any more and am unable to get the menu to reappear. Is there anyway to get the menu back without using a new sim?

AlphaRoX · 10-03-2013, 23:20

Turn on wireless internet, that works for me.

Saharatw · 10-04-2013, 07:12

The problem may came from radio baseband not read the sim data specially on iOS 7.x.

My worked is before put any sim in just patch with iRoseTool and re-boot the phone. After that put the R-Sim+phone SIM into and wait for awhile will pop-up the R-SIM menu for carrier setting-up.

Hope can help, goodluck...

twsim · 10-05-2013, 18:10

Thank you all for your help. Unfortunately, after 6 SIMs (2 uncut AT&T, 2 cut AT&T and 2 cut Straight talk), the RSIM8+ was unsuccessful at unlocking the phone. After the 100s of insertions/removals while trying to get it working, the RSIM must have become bent and jammed in the phone and was damaged during removal.

solop · 10-07-2013, 22:21

Sounds bad. Regret!

I tried r-sim 8+ but got the same issue: no carrier selection menu popped up for Sprint i4s, IOS 6.1.3 on uncut nano AT&T.

I heard some succeed with r-sim 7+ and miliki (product support r-sim) recommends r-sim air for iOS 4s.

And I'm looking around to unlock my Sprint 4s.

10-03-2013, 02:07	#1 (permalink)
twsim Junior Member Join Date: Oct 2013 Posts: 4 Member: 2038848 Status: Offline Thanks Meter: 0	No Service RSIM8+ Sprint iPhone 4S iOS 7.0.1 Hello, I received my R-SIM8+ today and have been unable to get it working. I am using a new (cut) Straight Talk (AT&T) SIM. I initially inserted the R-SIM+SIM, but the phone did not detect the SIM. I then installed the iR0seTool following the directions on the rsim5 site. After completing these steps, the phone was then able to detect the SIM when inserted. When the menu popped up, I selected "MODE1 FOR ios6 i4S", then "US Sprint". This appeared to complete successfully and I then restarted the phone. The phone now shows "No Service". I then went through the entire process again, with a "real" AT&T nano SIM and also receive no service. Both SIMs work fine in my Nexus 4 with a nano-to-micro adapter. I do not have any more SIMs and cannot get the menu (where I selected MODE1) to come back up. I'm not sure what to try next. Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2013, 05:08	#2 (permalink)
LuizinhoMN Freak Poster Join Date: Sep 2013 Location: Rio de Janeiro Age: 45 Posts: 141 Member: 2032687 Status: Offline Thanks Meter: 37	It takes about five minutes to sign appears, you're waiting for that time?

10-03-2013, 09:53	#3 (permalink)
twsim Junior Member Join Date: Oct 2013 Posts: 4 Member: 2038848 Status: Offline Thanks Meter: 0	Yes, I have waited 10+ minutes. The only thing that I've seen happen after some amount of time is that the phone shows a message that it could not be activated.

10-03-2013, 10:19	#5 (permalink)
imran4u5 Insane Poster Join Date: Dec 2009 Location: where people love each other Posts: 78 Member: 1185485 Status: Offline Thanks Meter: 8	try with different sim! it will work try to use a uncut sim good luck cheers

10-03-2013, 21:56	#6 (permalink)
twsim Junior Member Join Date: Oct 2013 Posts: 4 Member: 2038848 Status: Offline Thanks Meter: 0	I have tried with 3 sims, including one uncut sim. I do not have any more and am unable to get the menu to reappear. Is there anyway to get the menu back without using a new sim?

10-03-2013, 23:20	#7 (permalink)
AlphaRoX Junior Member Join Date: Sep 2013 Posts: 30 Member: 2031123 Status: Offline Thanks Meter: 4	Turn on wireless internet, that works for me.

10-04-2013, 07:12	#8 (permalink)
Saharatw Freak Poster Join Date: Aug 2008 Location: Bangkok Thailand Posts: 471 Member: 830167 Status: Offline Thanks Meter: 82	The problem may came from radio baseband not read the sim data specially on iOS 7.x. My worked is before put any sim in just patch with iRoseTool and re-boot the phone. After that put the R-Sim+phone SIM into and wait for awhile will pop-up the R-SIM menu for carrier setting-up. Hope can help, goodluck...

10-05-2013, 18:10	#9 (permalink)
twsim Junior Member Join Date: Oct 2013 Posts: 4 Member: 2038848 Status: Offline Thanks Meter: 0	Thank you all for your help. Unfortunately, after 6 SIMs (2 uncut AT&T, 2 cut AT&T and 2 cut Straight talk), the RSIM8+ was unsuccessful at unlocking the phone. After the 100s of insertions/removals while trying to get it working, the RSIM must have become bent and jammed in the phone and was damaged during removal.

10-07-2013, 22:21	#10 (permalink)
solop Junior Member Join Date: May 2010 Posts: 39 Member: 1314237 Status: Offline Thanks Meter: 2	Sounds bad. Regret! I tried r-sim 8+ but got the same issue: no carrier selection menu popped up for Sprint i4s, IOS 6.1.3 on uncut nano AT&T. I heard some succeed with r-sim 7+ and miliki (product support r-sim) recommends r-sim air for iOS 4s. And I'm looking around to unlock my Sprint 4s.