Lava X46 AFTER FLASH MOBILE DEAD - GSM-Forum

Blackdevill · 08-26-2019, 08:21

Mobile Before Condition Restart Problem Showing Only LOGO. So, I Try To Flash This File Lava Iris X46 s803

LOG:

Code:

EXE: Avengers Spreadtrum Module 1.0
ACTION: Flash Firmware.
Selected firmware: zsl839b_lava.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SCI USB2Serial (COM20)
[00:00:00] Sending loader.
BOOT: SPRD3W
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:01] First boot done.
[00:00:01] Sending second loader.
[00:00:05] Second loader sent ok.
[00:00:05] Reading: miscdata
[00:00:05] Reading: l_fixnv1
NVRAM saved to: C:\Users\ADMIN\Documents\spreadtrum_module\backup_nvram\_911514851516318\_911514851516318_nvram_backup.tar
[00:00:12] Start write: l_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting LTE_Calibration id: 0xA05
Protecting LTE_Cali_Band1 id: 0x9C4
Protecting LTE_Cali_Band2 id: 0xA04
Protecting LTE_Cali_Band3 id: 0x9C8
Protecting LTE_Cali_Band4 id: 0x9C9
Protecting LTE_Cali_Band5 id: 0x9CA
Protecting LTE_Cali_Band6 id: 0x9CB
Protecting LTE_Cali_Band7 id: 0x9CC
Protecting LTE_Cali_Band8 id: 0x9CD
Protecting LTE_Cali_Band9 id: 0x9CE
Protecting LTE_Cali_Band10 id: 0x9CF
Protecting LTE_Cali_Band11 id: 0x9D0
Protecting LTE_Cali_Band12 id: 0x9D1
Protecting LTE_Cali_Band13 id: 0x9D2
Protecting LTE_Cali_Band14 id: 0x9D3
Protecting LTE_Cali_Band15 id: 0x9D4
Protecting LTE_Cali_Band16 id: 0x9D5
Protecting LTE_Cali_Band17 id: 0x9D6
Protecting LTE_Cali_Band18 id: 0x9D7
Protecting LTE_Cali_Band19 id: 0xA01
Protecting LTE_Cali_Band20 id: 0xA02
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:15] Start write: prodnv
[00:00:16] Format: uboot
[00:00:16] [uboot]Format OK.
[00:00:16] Start write: splloader
[00:00:16] Start write: l_modem
[00:00:18] Start write: l_ldsp
[00:00:18] Start write: l_gdsp
[00:00:19] Start write: l_warm
[00:00:19] Start write: pm_sys
[00:00:19] Start write: wcnfdl
[00:00:19] Start write: wcnmodem
[00:00:19] Start write: boot
[00:00:21] Start write: recovery
[00:00:22] Start write: system
Differ buffer size
Error write mod: 0000F022
[2E3A1000]writing system wrong responce.
[YAFFS_IMG2]Error Write: System ,aborting.
Error while writing firmware, aborting.

Showing This Error During Flashing. After Mobile Ony Showing Red Notification Light Only. Not Power ON & Not Connection Flashing Mode (Sci USB serial)

Any Solution ???

**orbita** · 08-26-2019, 14:12

Many phones with logo only have problem with emmc flash ic or phone hardware.
In flash mode it should connect even with desoldered flash ic, posible your phone have some hardware problems.
Try to check phone battery and perform flash again, flashing only system this time.

Also you not selected repartition, on dead phones this is must if you flash whole firmware.

08-26-2019, 14:12	#2 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Many phones with logo only have problem with emmc flash ic or phone hardware. In flash mode it should connect even with desoldered flash ic, posible your phone have some hardware problems. Try to check phone battery and perform flash again, flashing only system this time. Also you not selected repartition, on dead phones this is must if you flash whole firmware.