Post Here successful reports with Avengers Box - Page 8 - GSM-Forum

SMflasher · 03-20-2016, 08:37

Selected connection metod: Adb Connection
Exe version: Avengers Box MTK 0.2.5
Selected phone: MT6571_EMMC
Action : IMEI REPAIR.
IMEI for write : 353458745896548
Repair IMEI Start.
Phone lcd must be on and unlocked.
If ask for SU acces, accept it.
Device have root
---NVRAM IMEI----

PHONE IMEI 1 : ***************

PHONE IMEI 2 : ***************

---------

WRITING IMEI[2] :3534***************

---------

Writed OK.

Br
SM-TEAM

SMflasher · 03-20-2016, 09:42

Read Info Meta Mode

Code:

 Action : Meta Info.
 Selected Model: 0-By CPU:MT6572_EMMC
 Exe version: Avengers Box MTK 0.2.5
 Curent Platform: MT6572
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [15]Detected: PreLoader USB VCOM (Android) (COM15) 
 \\?\usb#vid_0e8d&pid_2000#5&21f6e2ab&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [20]META Port Detected: Gadget CDC VCOM Driver (COM20) 
 USB\VID_0E8D&PID_2007\5&21F6E2AB&0&3 
 Start sync target, waiting responce.....
 Starting META using port[COM20], wait...
 BaseBand CPU : MT6582, E01
 MODEM SW Version : MOLY.WR8.W1315.MD.WG.MP.V34.P6
 MODEM HW Version : HUAQIN82_WET_B2A_KK_HSPA_HW
 IMEI[1] : 866130029917612
 IMEI[2] : 866130029917620
 BRAND: LENOVO
 MODEL: Lenovo A328
 NAME: Lenovo_A328
 VERSION: 4.4.2
 All done.

After Read Info Formit Now Recover All
HAng LOGo
Pasword
Pattren
Etc Locks

Code:

Action : Format UserData.
 Selected 0-By CPU:MT6572_EMMC
 Exe version: Avengers Box MTK 0.2.5
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM (Android) (COM15)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A48344731 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM27)
 Detecting format adress....wait!
 
 FORMAT EMMC FLASH :  BEGIN: 0x63d00000       - LEN: 0x7e00000       
 FORMAT EMMC FLASH :  BEGIN: 0x6bb00000       - LEN: 0x7cc00000      
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

BR
SM-Team

s a dot com · 03-25-2016, 00:54

samung read info succes with avanger box

Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Acer PreLoader USB VCOM (Android) (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E355530 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000 [3.645 GB]
[NVRAM]MAP Size: 15872 DAT Size: 35442
IMEI[1] from NVRAM: 352311072733087
IMEI[2] from NVRAM: 352312072733085
Wait untill phone will start charging.
All done.

kabul · 03-26-2016, 13:58

Samsung Galaxy S4 GT-i9505 Show

Only Download Mode Flash lollipop

V5.0.1 Successfully Done,

Feel The Power Time 04:43"

.:: BY ::.
..::: Avengers Box :::..

Flashing Logs

Code:

 
  Model Selected: GT-I9505
 Device detected OK: Modem (COM34)
 Downloading..
 Total Size: 2671019992
 Get PIT for mapping..
 Chipset: MSM8960
 Firmware update start..
 Loading: aboot.mbn, wait.
 Processing: aboot.mbn Size: [1.25 MB] [1313312]
 Loading: sbl2.mbn, wait.
 Processing: sbl2.mbn Size: [148.6 KB] [152168]
 Loading: sbl3.mbn, wait.
 Processing: sbl3.mbn Size: [264.32 KB] [270664]
 Loading: rpm.mbn, wait.
 Processing: rpm.mbn Size: [150.09 KB] [153696]
 Loading: tz.mbn, wait.
 Processing: tz.mbn Size: [211.98 KB] [217068]
 Loading: boot.img, wait.
 Processing: boot.img Size: [8.33 MB] [8734992]
 Loading: recovery.img, wait.
 Processing: recovery.img Size: [9.45 MB] [9908496]
 Loading: system.img.ext4, wait.
 Processing: system.img.ext4 Size: [2.28 GB] [2447068176]
 lastSequenceBytes: 24857616
 Loading: cache.img.ext4, wait.
 Processing: cache.img.ext4 Size: [78.23 MB] [82026860]
 lastSequenceBytes: 19112300
 Loading: hidden.img.ext4, wait.
 Processing: hidden.img.ext4 Size: [54.09 MB] [56721952]
 lastSequenceBytes: 25264672
 Loading: modem.bin, wait.
 Processing: modem.bin Size: [49.88 MB] [52304896]
 lastSequenceBytes: 20847616
 Loading: NON-HLOS.bin, wait.
 Processing: NON-HLOS.bin Size: [11.58 MB] [12147712]
 Resetting, wait until phone restart.
 Total Time: 00:04:43

kabul · 03-26-2016, 16:13

Samsung Galaxy Win GT-i8552 Unfortunately

android has stopped Flash Successfully Done,

Feel The Power Time 04:06"

.:: BY ::.
..::: Avengers Box :::..

Flashing Logs

Code:

 
   Model Selected: GT-I8552
 Device detected OK: Modem (COM34)
 Downloading..
 Total Size: 1261286412
 Get PIT for mapping..
 Chipset: MSM8x25
 Firmware update start..
 Loading: boot.img, wait.
 Processing: boot.img Size: [4.84 MB] [5075200]
 Loading: recovery.img, wait.
 Processing: recovery.img Size: [5.52 MB] [5787904]
 Loading: system.img.ext4, wait.
 Processing: system.img.ext4 Size: [1.04 GB] [1112271448]
 lastSequenceBytes: 11266648
 Loading: fat.bin, wait.
 Processing: fat.bin Size: [19.3 MB] [20235520]
 Loading: cache.img.ext4, wait.
 Processing: cache.img.ext4 Size: [45.33 MB] [47534480]
 lastSequenceBytes: 16077200
 Loading: hidden.img.ext4, wait.
 Processing: hidden.img.ext4 Size: [67.12 MB] [70381860]
 lastSequenceBytes: 7467300
 Resetting, wait until phone restart.
 Total Time: 00:04:06

syed ubaid · 03-29-2016, 19:52

Code:

Exe Version: Avengers Tool v1.9
Detecting phone, wait..
Detected: Modem (COM20)
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Done
Chipset: SPRD8735
Data Found, processing...
Resetting FRP, wait..
FRP OFF... Done
Now you can wipe phone to remove remaining data...
Restarting Phone
Restart Ok
All Done
Done.

kabul · 03-31-2016, 15:51

Samsung Galaxy Grand Neo GT-i9060 ORG Hang

Logo Flash Successfully Done,

Feel The Power Time 02:40"

.:: BY ::.
..::: Avengers Box :::..

Flashing Logs

Code:

 
   Model Selected: GT-I9060
 Device detected OK: Modem (COM32)
 Downloading..
 Total Size: 1564815976
 Get PIT for mapping..
 Chipset: BaffinLi
 Firmware update start..
 Loading: sboot.bin, wait.
 Processing: sboot.bin Size: [632.11 KB] [647276]
 Loading: param.lfs, wait.
 Processing: param.lfs Size: [600 KB] [614400]
 Loading: dt-blob, wait.
 Processing: dt-blob Size: [2.38 KB] [2440]
 Loading: boot.img, wait.
 Processing: boot.img Size: [5.22 MB] [5472768]
 Loading: recovery.img, wait.
 Processing: recovery.img Size: [6.61 MB] [6935040]
 Loading: system.img, wait.
 Processing: system.img Size: [1.31 GB] [1403785940]
 lastSequenceBytes: 19665620
 Loading: BcmCP.img, wait.
 Processing: BcmCP.img Size: [17.25 MB] [18087936]
 Loading: cache.img, wait.
 Processing: cache.img Size: [116.2 MB] [121839848]
 lastSequenceBytes: 27468008
 Loading: hidden.img, wait.
 Processing: hidden.img Size: [7.09 MB] [7430328]
 Resetting, wait until phone restart.
 Total Time: 00:02:40
 ************************************* 
 Log saved:
 C:\Users\Kabul\Documents\Avengers\Saved_Logs\GT-I9060_flashing_log_1.txt

EjazATF · 04-01-2016, 10:28

QMobile
i5

Security Item Restored Successfully

Code:

 Action: Restore Security Items
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A48344731 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM60)
 Start writing PROTECT_F, wait.......
 Start writing PROTECT_S, wait.......
 Wait untill phone will start charging.
 All done.

EjazATF · 04-01-2016, 15:43

QMobile
X2

Low Space Problem Has Been Solved via Format Method

Code:

 Action : Format UserData.
 Selected Qmobile:Q Mobile Noir x6
 Exe version: Avengers Box MTK 0.2.6
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6571_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1 
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 4096 SpareSize: 208  BMT Blocks 80
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM60)
 Searching partiton table, wait..
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000        
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x100000        
 [2]Part: NVRAM Begin: 0x200000         Len: 0x300000        
 [3]Part: PROTECT_F Begin: 0x500000         Len: 0x300000        
 [4]Part: SECCFG Begin: 0x800000         Len: 0x40000         
 [5]Part: UBOOT Begin: 0x840000         Len: 0x80000         
 [6]Part: BOOTIMG Begin: 0x8c0000         Len: 0x600000        
 [7]Part: RECOVERY Begin: 0xec0000         Len: 0x600000        
 [8]Part: SEC_RO Begin: 0x14c0000        Len: 0x40000         
 [9]Part: MISC Begin: 0x1500000        Len: 0xc0000         
 [10]Part: LOGO Begin: 0x15c0000        Len: 0x100000        
 [11]Part: EXPDB Begin: 0x16c0000        Len: 0x200000        
 [12]Part: FAT Begin: 0x18c0000        Len: 0x1400000       
 [13]Part: ANDROID Begin: 0x2cc0000        Len: 0x12c00000      
 [14]Part: CACHE Begin: 0x158c0000       Len: 0x180000        
 [15]Part: USRDATA Begin: 0x15a40000       Len: 0x9740000       
 [16]Part: BMTPOOL Begin: 0xffff0038       Len: 0x0             
 Offset: 0x1efc0000       Count: 17
 Detecting format adress....wait!
 
 FORMAT NAND FLASH :  BEGIN: 0x158c0000       - LEN: 0x180000        
 FORMAT NAND FLASH :  BEGIN: 0x15a40000       - LEN: 0x9740000       
Format Range: 0X15A40000       ~ 0X1F17FFFF      
Format Size: 1.18Gb

Bad Blocks: 0
Error Blocks: 2
Total Blocks: 605

Bad/Error Block Ratio: (0.331%)

 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

kabul · 04-04-2016, 13:34

Q Mobile Noir i6 Only Blue Display

Recovery Successfully Done,

Feel The Power Time 04:20"

.:: BY ::.
..::: Avengers Box :::..

Meta info

EjazATF · 04-04-2016, 14:56

Samsung
J700F

FRP Removal Completed Successfully

Code:

Exe Version: Avengers Tool v1.9
Detecting phone, wait..
Detected: Modem (COM12)
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Done
Chipset: LSI7580
Data Found, processing...
Resetting FRP, wait..
FRP OFF... Done
Now you can wipe phone to remove remaining data...
Restarting Phone
Restart Ok
All Done
Done.

tousgsm · 04-06-2016, 00:06

flash acer z500 done with ..::: Avengers Box :::..

firmware
MT6582_scatter_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1. txt

Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM20)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330 : 000000000000000000
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000 [3.606 GB]
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x50d80000 - LEN: 0x10000000
FORMAT EMMC FLASH : BEGIN: 0x60d80000 - LEN: 0x849a0000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.

fash done in 3:19s

tousgsm · 04-06-2016, 00:15

unlock acer z500 ..::: Avengers Box :::.. done in 1:29sec

Selected connection metod: META Mode
Exe version: Avengers Box MTK 0.2.6
Selected model: Liquid Z500
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6582
Phone must be off with battery inside.
Please insert USB cable now...
[20]Detected: MediaTek PreLoader USB VCOM Port (COM20)
\\?\usb#vid_0e8d&pid_2000#5&c4f6ec7&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[63]META Port Detected: Android Gadget VCOM Driver (COM63)
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V39.P2
HW_VER : CCI82_WET_NJ_KK_HSPA_HW
Clean Boot flag ok.
All done.

MTK CHIP · 04-09-2016, 19:51

Thankx to Avenger Box. Only single click and reset frp done.

Code:

PHONE SELECTED: Alcatel One Touch POP 2
Exe Version: Avengers Tool v1.9
Phone Detected.
SM-J700F
Model: SM-J700F
Base: SM-N900
Version: J700FXXU1AOK8/J700FODD1AOK4/J700FXXU1AOK6/J700FXXU1AOK8
PRD: SM-J700FZWDINS
SN: RZ8******PP
IMEI: 356 MTK CHIP 6912
+FACTORST:0
OK

Phone Will Reboot When Done.

Gsm.Universal · 04-10-2016, 07:43

Huawei Honor Holly U19 Flash Done with Avengers Box

Flash files count is :12
Action : Firmware update.
Selected Model: Huawei: Honor Holly-U19
Exe version: Avengers Box MTK 0.2.6
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM15)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) HYNIX 0x484147346404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48414734 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM19)
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x50d00000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x58b00000 - LEN: 0x352400000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.

03-20-2016, 08:37	#106 (permalink)
SMflasher Freak Poster Join Date: Dec 2015 Location: Mere Liye Allah He KAfi HAi Posts: 273 Member: 2495965 Status: Offline Sonork: 100.1646709 Thanks Meter: 218	Huawei G610-u00 Write imei Success W/o Bootloder Unlock Tahnks Team Selected connection metod: Adb Connection Exe version: Avengers Box MTK 0.2.5 Selected phone: MT6571_EMMC Action : IMEI REPAIR. IMEI for write : 353458745896548 Repair IMEI Start. Phone lcd must be on and unlocked. If ask for SU acces, accept it. Device have root ---NVRAM IMEI---- PHONE IMEI 1 : ************* PHONE IMEI 2 : *********** --------- WRITING IMEI[2] :3534************* --------- Writed OK. Br SM-TEAM

04-09-2016, 19:51	#119 (permalink)
MTK CHIP Freak Poster Join Date: Mar 2010 Location: In Search of free BB5 rpl Posts: 468 Member: 1248595 Status: Offline Sonork: 100.1607313 Thanks Meter: 99	Samsung J7 Reset frp successful......Thankx to AVB :D Thankx to Avenger Box. Only single click and reset frp done. Code: PHONE SELECTED: Alcatel One Touch POP 2 Exe Version: Avengers Tool v1.9 Phone Detected. SM-J700F Model: SM-J700F Base: SM-N900 Version: J700FXXU1AOK8/J700FODD1AOK4/J700FXXU1AOK6/J700FXXU1AOK8 PRD: SM-J700FZWDINS SN: RZ8****PP IMEI: 356 MTK CHIP** 6912 +FACTORST:0 OK Phone Will Reboot When Done.

03-25-2016, 00:54	#108 (permalink)
s a dot com Freak Poster Join Date: Jul 2012 Location: karachi Age: 31 Posts: 296 Member: 1779651 Status: Offline Sonork: 100.1603336 Thanks Meter: 97	samung read info succes with avanger box Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : Acer PreLoader USB VCOM (Android) (COM3) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d EMMC FW VERSION: 02:00:00:00:00:00:00:00 EMMC CID: 1501004E355530 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9420000 [3.645 GB] [NVRAM]MAP Size: 15872 DAT Size: 35442 IMEI[1] from NVRAM: 352311072733087 IMEI[2] from NVRAM: 352312072733085 Wait untill phone will start charging. All done.

04-04-2016, 13:34	#115 (permalink)
kabul No Life Poster Join Date: Jan 2007 Posts: 4,633 Member: 433097 Status: Offline Sonork: 100.1661890 Thanks Meter: 8,074	Q Mobile Noir i6 Only Blue Display Recovery Successfully Done, Feel The Power Time 04:20" *.:: BY ::. ..:::* Avengers Box *:::..* Meta info

04-06-2016, 00:06	#117 (permalink)
tousgsm Freak Poster Join Date: Apr 2009 Location: morocco Posts: 252 Member: 1012961 Status: Offline Thanks Meter: 37	flash acer z500 done with ..::: Avengers Box :::.. firmware MT6582_scatter_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1. txt Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM20) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6582_S01 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (28Gb+8192Mb) KSI 0x4d4d43303447 EMMC FW VERSION: 58:00:00:00:00:00:00:00 EMMC CID: 7001004D4D4330 : 000000000000000000 EMMC UA SIZE: 0xe6800000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe6c20000 [3.606 GB] Flash EMMC Algo Start. Preloader backup already exist, skip saving. Starting flash. FORMAT EMMC FLASH : BEGIN: 0x50d80000 - LEN: 0x10000000 FORMAT EMMC FLASH : BEGIN: 0x60d80000 - LEN: 0x849a0000 Send preloader... Download firmware to flash now... Wait untill phone will start charging. All done. fash done in 3:19s

04-06-2016, 00:15	#118 (permalink)
tousgsm Freak Poster Join Date: Apr 2009 Location: morocco Posts: 252 Member: 1012961 Status: Offline Thanks Meter: 37	unlock acer z500 ..::: Avengers Box :::.. done in 1:29sec Selected connection metod: META Mode Exe version: Avengers Box MTK 0.2.6 Selected model: Liquid Z500 Action: Unlock Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6582 Phone must be off with battery inside. Please insert USB cable now... [20]Detected: MediaTek PreLoader USB VCOM Port (COM20) \\?\usb#vid_0e8d&pid_2000#5&c4f6ec7&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [63]META Port Detected: Android Gadget VCOM Driver (COM63) USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&0&0002 Start sync target, waiting responce..... BaseBand CPU : MT6582, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V39.P2 HW_VER : CCI82_WET_NJ_KK_HSPA_HW Clean Boot flag ok. All done.

04-10-2016, 07:43	#120 (permalink)
Gsm.Universal No Life Poster Join Date: Feb 2011 Location: Pakistan & UAE (Dubai) Age: 34 Posts: 3,011 Member: 1526738 Status: Offline Sonork: 100.1607644 Thanks Meter: 6,688	Huawei Honor Holly U19 Flash Done with Avengers Box Flash files count is :12 Action : Firmware update. Selected Model: Huawei: Honor Holly-U19 Exe version: Avengers Box MTK 0.2.6 Scenario: Full Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM15) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6582_S01 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (117Gb+8192Mb) HYNIX 0x484147346404 EMMC FW VERSION: 05:00:00:00:00:00:00:00 EMMC CID: 90014A48414734 : 000000000000000000 EMMC UA SIZE: 0x3ab800000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3ac400000 [14.691 GB] Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM19) Flash EMMC Algo Start. Preloader saved in firmware directory. Starting flash. FORMAT EMMC FLASH : BEGIN: 0x50d00000 - LEN: 0x7e00000 FORMAT EMMC FLASH : BEGIN: 0x58b00000 - LEN: 0x352400000 Send preloader... Download firmware to flash now... Wait untill phone will start charging.