Post Here successful reports with Avengers Box - Page 81 - GSM-Forum

rsa7262 · 08-26-2019, 11:50

HTC ONE S9 DUMP SCATTER FILE DONE

Code:

Action : Read Firmware.
 Selected HTC:HTC 210
 Exe version: Avengers Box MTK 0.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM14)
 Boot mode: Preloader
 BBCHIP: 6795 0 ca00
 Using Algo 4.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6795
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x414a4e423452 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100414A4E423452 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM15)
 IMEI[1]: 352325100002992
 IMEI[2]: 352325100002992
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 352325100002992
 IMEI[2] from NVRAM: 352325100002992
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing persist ......
 Reading:  BEGIN: 0x1c80000        - LEN: 0x3000000       
 Start processing lk 
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x7f80000        - LEN: 0x80000         
 Start processing trustzone
 Start processing boot 
 Start processing recovery 
 Start processing system
 Reading:  BEGIN: 0x42000000       - LEN: 0xb8000000      
 Saved to : C:\Users\rsa7262\Documents\Android_MTK\firmware_backup\MT6795_EMMC_2019_08_25_13_11)]

Yusuf Lawal · 08-28-2019, 23:21

Action : Meta Info.
Selected Model: 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.6.1
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#6&22716c98&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_2007\6&22716C98&0&3
Start sync target, waiting responce.....
ChipID: MT6753,S01
Using Algo 2.
Brand: QiKU
Board: unknown
Model: 8681-M02
Name: CP8681_M02
Release: V110
Version: 5.1
Mediatek Version: ALPS.L1.MP3.V2.95_QIKU6753.65C.L1_P61
Branch: L1.MP3
Platform: MT6735
Reading imei
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Modem Version: LR9.W1444.MD.LWTG.CMCC.MP QIKU6753h*LTTG_DSDS_CMCC
[0]All done.

Action : Reset to factory default.
Selected Model: 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.6.1
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#6&22716c98&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_2007\6&22716C98&0&3
Start sync target, waiting responce.....
ChipID: MT6753,S01
Using Algo 2.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[0]All done.

rsa7262 · 08-29-2019, 11:41

FOUR MOBILE FRP REMOVE DONE

Code:

Exe version: Avengers Box MTK 0.6.2
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM14)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 150100464E58324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Checking data, wait...
 
 writing para!
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

rsa7262 · 08-31-2019, 12:35

qmobile F.P 6531 read Password Done

Code:

ACTION: Read Password
SELECTED: SC6531
EXE: Avengers Spreadtrum Module 0.9
Start Detect phone...
Detected: SPRD U2S Diag (COM17)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: GigaDevice: [0x400000]GD25LQ32B
Reading Flash Info, wait...
Flash Size: $400000 Sector Size: $8000
IMEI 1: xxxxxxxxxxxxxxx
IMEI 2: xxxxxxxxxxxxxxx
[2D6]Password: 0000 
[2D5]Password: 1707  Inactive
[21B]Password: 0000 
Total Time: 00:00:16
Done.

ashrafgsmforum · 09-03-2019, 07:52

hi all finaly i find solution for TA-1188 LOCK
IN AVENGER TOOL CLICK META RESET TO FACTORY

LOG

Action : Reset to factory default.
Selected Model: 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.6.1
Scanning for presents meta ports...
Detected(135) : Android Gadget VCOM Driver (COM135)
Start sync target, waiting responce.....
ChipID: MT6761
Using Algo 5.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[helio]Wait untill phone will start charging.
[0]All done.
PRESS THANK BUTTON PLS

Akhtar Ali Jatt · 09-06-2019, 12:34

Exe version: Avengers Box MTK 0.6.2
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM264)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463832324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

writing para!
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

Akhtar Ali Jatt · 09-06-2019, 12:35

Action : Format UserData.
Selected 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM255)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 460001154d323238ff
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463832324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM265)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0xaa800000 length: 0x10000000
Partition: userdata begin: 0xba800000 length: 0x2e8580000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
[0]All done.

hunnyck · 09-08-2019, 12:45

INTEX-AQUA-4.5Pro format done

Action: Reset Phone.
Detecting phone, wait...
Detected: SPRD U2S Diag (COM81)
Port Opened OK.
Platform Version: MOCORTM_14B_TShark_OC_W16.10_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_15A_W16.10
HW Version: sc7731g_CP0_modem
03-01-2016 10:57:29s
IMEI 1: 9115083021
IMEI 2: 9115083021
DONE
Done.

shahzadqadri · 09-14-2019, 11:23

Honor 3C H30-U10 Hang On Logo Done With King Avengers Box

nadim electro · 09-17-2019, 08:33

Selected Model: OPPO:F3
Exe version: Avengers Box MTK 0.6.0
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[12]Detected: USB Single Port (COM12)
\\?\usb#vid_0e8d&pid_0003#5&2ab349b3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[219]META Port Detected: Preloader And Gadget Serial (COM219)
USB\VID_22D9&PID_0006\5&2F893313&0&3
Start sync target, waiting responce.....
ChipID: MT6750,S01
Using Algo 3.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[0]All done

Yusuf Lawal · 09-17-2019, 21:13

ACTION: Unlock Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Platform Version MOCORTM_17B_Release_W18.31.3_DebugProject Version sharkle_Smart_PhoneBASE Version FM_BASE_17B_Release_W18.31.3HW Version sc9832e_modem08-01-2018 120150
Build number: IMO_Q2_Plus_series-user 8.1.0 O21019 1534316701 release-keys
Serial number: Q2PlusSP18G800022540
IMEI 1: XXXXXXXXXXXXXXX
IMEI 2: XXXXXXXXXXXXXXX
BT: 300AC512AC2B
WIFI: 300AC5130A27
Reading simlock, wait....

[9:9][USER]Simlock Status: LOCKED[1] Simlock Counter:[7/10]
[2]Simlock Type: 9 9
Sim 1 Unlock Code: 10544723
Sim 2 Unlock Code: 22284497
Warning, this is factory key, some opperators can modify factory key.
Saved to: C:\Users\Yuslam Unique\Documents\spreadtrum_module\backup\spd_siml ock_nvram_backup\XXXXXXXXXXXXXXX__IMO_Q2_Plus_seri es_user_8_1_0_O21019_1534316701_release_keys_Q2Plu sSP18G800022540\
Writing simlock...
Writing simlock ok
Done.

mbiborna · 09-23-2019, 15:17

Code:

 Flash files count is :21
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6739
 Exe version: Avengers Box MTK 0.6.3
 Scenario: [1]Full Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM35)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6739 0 ca00
 Using Algo 5.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051453633 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM36)
C:\Users\mess\Desktop\xxx\Firmware\preloader_backup_23_09_2019_20_14\preloader_lava6739_32_op63.bin
 Backup preloader saved in firmware directory.
 Starting flash.
 Send preloader...
 Send preloader...
 [helio]Wait untill phone will start charging.
 [0]All done.

skakroliya · 09-25-2019, 06:53

Exe version: Avengers Box MTK 0.6.3
Selected model: Vivo Y17
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM (Android) (COM95)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 5.
Helio MT6765 phone detected, swithing to helio api
Loading Custom Preloader
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010047503642 : 000000000000000000
EMMC UA SIZE: 0xe8f800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe91000000 [58.266 GB]
Phone have OTP partition.
Starting helio frp, not disconnect phone untill done
[HELIO]Format partition, please wait...
[0]FRP Reset Done.
[HELIO]Format partition, please wait...
[1]FRP Reset Done.

biewolf23 · 09-26-2019, 07:50

Wiko Jerry 3 (W_K300) FRP done!
- choose model jerry 2

Action : Boot Info.
Selected WIKO:Jerry 2
Exe version: Avengers Box MTK 0.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM6)
Build ID: O11019
Display ID: O11019 release-keys
Version: 8.1.0
Build Date: Thu Jul 5 17:54:06 CST 2018
Model: W_K300
Brand: WIKO
Device: W_K300
Manufacturer: WIKO
This phone have FRP partition.
IMEI[1]: 356323099458974
IMEI[2]: 356323099498970
Wait untill phone will start charging.
[0]All done.

Exe version: Avengers Box MTK 0.6.2
Selected model: WIKO Jerry 2
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

writing para!
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

shahidjanu · 10-12-2019, 17:45

Action: Reset Phone.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Detected: SPRD U2S Diag (COM20)
Platform Version MOCOR_16A.KING_W19.27.4_Release10.00.17.02BASE Version BASE_SVNHW Version SC6531EFM_BAR05-07-2019 144812
IMEI 1: 35
IMEI 2: 35
DONE
DONE
DONE
DONE
Done.

08-28-2019, 23:21	#1202 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,591 Member: 1677653 Status: Offline Thanks Meter: 2,769	Qiku 8681-m02 format done via meta mode Action : Meta Info. Selected Model: 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.6.1 Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5) \\?\usb#vid_0e8d&pid_2000#6&22716c98&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [11]META Port Detected: MediaTek USB VCOM (Android) (COM11) USB\VID_0E8D&PID_2007\6&22716C98&0&3 Start sync target, waiting responce..... ChipID: MT6753,S01 Using Algo 2. Brand: QiKU Board: unknown Model: 8681-M02 Name: CP8681_M02 Release: V110 Version: 5.1 Mediatek Version: ALPS.L1.MP3.V2.95_QIKU6753.65C.L1_P61 Branch: L1.MP3 Platform: MT6735 Reading imei IMEI[1]: XXXXXXXXXXXXXXX IMEI[2]: XXXXXXXXXXXXXXX Modem Version: LR9.W1444.MD.LWTG.CMCC.MP QIKU6753h*LTTG_DSDS_CMCC [0]All done. Action : Reset to factory default. Selected Model: 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.6.1 Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5) \\?\usb#vid_0e8d&pid_2000#6&22716c98&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [11]META Port Detected: MediaTek USB VCOM (Android) (COM11) USB\VID_0E8D&PID_2007\6&22716C98&0&3 Start sync target, waiting responce..... ChipID: MT6753,S01 Using Algo 2. Resetting phone step 1, wait.... Resetting phone step 2, wait.... ClearValue ok. FormatTCard ok. [0]All done.

09-06-2019, 12:34	#1206 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,873 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424	Qmobile i6 Metal One F.R.p Reset Done Exe version: Avengers Box MTK 0.6.2 Selected model: 0-By CPU ELBRUS [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM264) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100463832324D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Checking data, wait... writing para! Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. [0]All done.

09-06-2019, 12:35	#1207 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,873 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424	QMOBiLE I6 METAL ONE FORMAT DONE Action : Format UserData. Selected 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.6.2 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM255) Boot mode: Brom BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... [emmi]EMMC CID: 460001154d323238ff ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : FE ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x463832324d42 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100463832324D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM265) Detecting format adress....wait! Starting generic userdata format...! Partition: cache begin: 0xaa800000 length: 0x10000000 Partition: userdata begin: 0xba800000 length: 0x2e8580000 Phone can start slow at first power on If phone stuck on logo, perform wipe from recovery. First start can take up to 5 min on some phones. Wait untill phone will start charging. [0]All done.

09-14-2019, 11:23	#1209 (permalink)
shahzadqadri Product Supporter Join Date: Sep 2016 Location: Pakistan Posts: 1,164 Member: 2620420 Status: Offline Sonork: 100.1678393 Thanks Meter: 1,295	Honor 3C H30-U10 Hang On Logo Done With King Avengers Box Honor 3C H30-U10 Hang On Logo Done With King Avengers Box

09-17-2019, 08:33	#1210 (permalink)
nadim electro No Life Poster Join Date: Oct 2006 Location: pakistan Posts: 669 Member: 361094 Status: Offline Sonork: 100.1597521 Thanks Meter: 172	oppo cph1909 format meta mode done Selected Model: OPPO:F3 Exe version: Avengers Box MTK 0.6.0 Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [12]Detected: USB Single Port (COM12) \\?\usb#vid_0e8d&pid_0003#5&2ab349b3&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [219]META Port Detected: Preloader And Gadget Serial (COM219) USB\VID_22D9&PID_0006\5&2F893313&0&3 Start sync target, waiting responce..... ChipID: MT6750,S01 Using Algo 3. Resetting phone step 1, wait.... Resetting phone step 2, wait.... ClearValue ok. FormatTCard ok. [0]All done

09-03-2019, 07:52	#1205 (permalink)
ashrafgsmforum Major Poster Join Date: Feb 2014 Location: kerala Posts: 47 Member: 2135872 Status: Offline Thanks Meter: 9	hi all finaly i find solution for TA-1188 LOCK IN AVENGER TOOL CLICK META RESET TO FACTORY LOG Action : Reset to factory default. Selected Model: 0-By CPU:ELBRUS Exe version: Avengers Box MTK 0.6.1 Scanning for presents meta ports... Detected(135) : Android Gadget VCOM Driver (COM135) Start sync target, waiting responce..... ChipID: MT6761 Using Algo 5. Resetting phone step 1, wait.... Resetting phone step 2, wait.... ClearValue ok. FormatTCard ok. [helio]Wait untill phone will start charging. [0]All done. PRESS THANK BUTTON PLS

09-08-2019, 12:45	#1208 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	INTEX-AQUA-4.5Pro format done Action: Reset Phone. Detecting phone, wait... Detected: SPRD U2S Diag (COM81) Port Opened OK. Platform Version: MOCORTM_14B_TShark_OC_W16.10_Debug Project Version: sc7731g_CP0_modem BASE Version: TM_BASE_15A_W16.10 HW Version: sc7731g_CP0_modem 03-01-2016 10:57:29s IMEI 1: 9115083021 IMEI 2: 9115083021 DONE Done.

09-17-2019, 21:13	#1211 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,591 Member: 1677653 Status: Offline Thanks Meter: 2,769	Imo q2 plus unlocking done in diag mode ACTION: Unlock Phone. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Platform Version MOCORTM_17B_Release_W18.31.3_DebugProject Version sharkle_Smart_PhoneBASE Version FM_BASE_17B_Release_W18.31.3HW Version sc9832e_modem08-01-2018 120150 Build number: IMO_Q2_Plus_series-user 8.1.0 O21019 1534316701 release-keys Serial number: Q2PlusSP18G800022540 IMEI 1: XXXXXXXXXXXXXXX IMEI 2: XXXXXXXXXXXXXXX BT: 300AC512AC2B WIFI: 300AC5130A27 Reading simlock, wait.... [9:9][USER]Simlock Status: LOCKED[1] Simlock Counter:[7/10] [2]Simlock Type: 9 9 Sim 1 Unlock Code: 10544723 Sim 2 Unlock Code: 22284497 Warning, this is factory key, some opperators can modify factory key. Saved to: C:\Users\Yuslam Unique\Documents\spreadtrum_module\backup\spd_siml ock_nvram_backup\XXXXXXXXXXXXXXX__IMO_Q2_Plus_seri es_user_8_1_0_O21019_1534316701_release_keys_Q2Plu sSP18G800022540\ Writing simlock... Writing simlock ok Done.

09-25-2019, 06:53	#1213 (permalink)
skakroliya Freak Poster Join Date: Aug 2010 Location: india, haryana, Posts: 425 Member: 1358048 Status: Offline Thanks Meter: 706	Vivo Y17 frp done Exe version: Avengers Box MTK 0.6.3 Selected model: Vivo Y17 [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Keep VOL+ button untill inserting USB cable. Detected : MediaTek PreLoader USB VCOM (Android) (COM95) Boot mode: Preloader Phone detected...Please wait BBCHIP: 6765 0 ca00 Using Algo 5. Helio MT6765 phone detected, swithing to helio api Loading Custom Preloader Helio enabled DRAM in First Da: TRUE BBCHIP MT6765 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 15010047503642 : 000000000000000000 EMMC UA SIZE: 0xe8f800000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe91000000 [58.266 GB] Phone have OTP partition. Starting helio frp, not disconnect phone untill done [HELIO]Format partition, please wait... [0]FRP Reset Done. [HELIO]Format partition, please wait... [1]FRP Reset Done.

09-26-2019, 07:50	#1214 (permalink)
biewolf23 Crazy Poster Join Date: Dec 2014 Location: Malaysia Posts: 58 Member: 2318529 Status: Offline Thanks Meter: 71	Wiko Jerry 3 (W_K300) FRP done! - choose model jerry 2 Action : Boot Info. Selected WIKO:Jerry 2 Exe version: Avengers Box MTK 0.6.2 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100464536324D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM6) Build ID: O11019 Display ID: O11019 release-keys Version: 8.1.0 Build Date: Thu Jul 5 17:54:06 CST 2018 Model: W_K300 Brand: WIKO Device: W_K300 Manufacturer: WIKO This phone have FRP partition. IMEI[1]: 356323099458974 IMEI[2]: 356323099498970 Wait untill phone will start charging. [0]All done. Exe version: Avengers Box MTK 0.6.2 Selected model: WIKO Jerry 2 [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100464536324D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Checking data, wait... writing para! Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. [0]All done.

10-12-2019, 17:45	#1215 (permalink)
shahidjanu No Life Poster Join Date: Dec 2011 Posts: 844 Member: 1706213 Status: Offline Thanks Meter: 213	ta-1174 format done Action: Reset Phone. Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Detected: SPRD U2S Diag (COM20) Platform Version MOCOR_16A.KING_W19.27.4_Release10.00.17.02BASE Version BASE_SVNHW Version SC6531EFM_BAR05-07-2019 144812 IMEI 1: 35 IMEI 2: 35 DONE DONE DONE DONE Done.