GSM-Forum - Samsung NAND6572 G850f clone Done

Samsung Clone G850f Done again Only Formate
No need file No Need Any Risk
If U have Avanger Box. Do All In Some Sec
https://i.ytimg.com/vi/Y76EW4eQwkg/maxresdefault.jpg
INFO

Code:

Curent Platform: MT6572 Phone must be off with battery inside. Please insert USB cable now... Detected(5) : MediaTek PreLoader USB VCOM Port (COM5) Starting META mode, wait... Restarting, wait.... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. META Port Detected[49] Gadget Serial (COM49) USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&1&0002 SP_META_BOOT Starting META using port[COM49], wait... BaseBand CPU : MT6572, E01 MODEM SW Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1 MODEM HW Version : LENOVO72_WE_JB3_HSPA_HW IMEI[1] : 359883006305425 IMEI[2] : FFFFFFFFFFFFFFF BRAND: samsung MODEL: SM-G850F NAME: Galaxy ALPHA VERSION: 4.4.4 All done.

http://mars.workupload.com/image/BMwEbpoQ
Formate

Code:

Action : Format UserData. Selected 0-By CPU:MT6572_NAND Exe version: Avengers Box MTK 0.2.4 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM5) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- NAND: (4Gb+4096Mb) [HYNIX] H9DA4GH4JJAMCR_4EM BOOT STYLE : NAND BOOT Size: 0x20000000 [0.500 GB] BlockSize: 2048 SpareSize: 64 BMT Blocks 80 Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM Port (COM9) Searching partiton table, wait.. [0]Part: PRELOADER Begin: 0x0 Len: 0x100000 [1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000 [2]Part: NVRAM Begin: 0x200000 Len: 0x300000 [3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000 [4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000 [5]Part: SECCFG Begin: 0xb00000 Len: 0x40000 [6]Part: UBOOT Begin: 0xb40000 Len: 0x80000 [7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000 [8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000 [9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000 [10]Part: MISC Begin: 0x1800000 Len: 0xc0000 [11]Part: LOGO Begin: 0x18c0000 Len: 0x100000 [12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000 [13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000 [14]Part: ANDROID Begin: 0x2fc0000 Len: 0x11800000 [15]Part: CACHE Begin: 0x147c0000 Len: 0x700000 [16]Part: USRDATA Begin: 0x14ec0000 Len: 0xa700000 [17]Part: BMTPOOL Begin: 0xffff0028 Len: 0x0 Offset: 0x1f598000 Count: 18 Detecting format adress....wait! FORMAT NAND FLASH : BEGIN: 0x147c0000 - LEN: 0x700000 FORMAT NAND FLASH : BEGIN: 0x14ec0000 - LEN: 0xa700000 Format Range: 0X14EC0000 ~ 0X1F5BFFFF Format Size: 1.30Gb Bad Blocks: 0 Error Blocks: 2 Total Blocks: 1336 Bad/Error Block Ratio: (0.150%) Phone can start slow at first power on If phone stuck on logo, perform wipe from recovery. First start can take up to 5 min on some phones. Wait untill phone will start charging. All done.

http://mars.workupload.com/image/2HgpgCPW
http://mars.workupload.com/image/ZhSFnWHt

Stay Tune!
More Developing!!
More coming!!!

Bro
AZHERGOGA007