Samsung NAND6572 G850f clone Done

[azhergoga007]

Samsung Clone G850f Done again Only Formate
No need file No Need Any Risk
If U have Avanger Box. Do All In Some Sec

INFO

 Curent Platform: MT6572
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected(5) : MediaTek PreLoader USB VCOM Port (COM5) 
 Starting META mode, wait...
 Restarting, wait....
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 META Port Detected[49] Gadget Serial (COM49) 
 USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&1&0002 
 SP_META_BOOT
 Starting META using port[COM49], wait...
 BaseBand CPU : MT6572, E01
 MODEM SW Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1
 MODEM HW Version : LENOVO72_WE_JB3_HSPA_HW
 IMEI[1] : 359883006305425
 IMEI[2] : FFFFFFFFFFFFFFF
 BRAND: samsung
 MODEL: SM-G850F
 NAME: Galaxy ALPHA
 VERSION: 4.4.4
 All done.

Formate

 Action : Format UserData.
 Selected 0-By CPU:MT6572_NAND
 Exe version: Avengers Box MTK 0.2.4
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM5)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+4096Mb) [HYNIX] H9DA4GH4JJAMCR_4EM 
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 2048 SpareSize: 64  BMT Blocks 80
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM Port (COM9)
 Searching partiton table, wait..
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000        
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x100000        
 [2]Part: NVRAM Begin: 0x200000         Len: 0x300000        
 [3]Part: PROTECT_F Begin: 0x500000         Len: 0x300000        
 [4]Part: PROTECT_S Begin: 0x800000         Len: 0x300000        
 [5]Part: SECCFG Begin: 0xb00000         Len: 0x40000         
 [6]Part: UBOOT Begin: 0xb40000         Len: 0x80000         
 [7]Part: BOOTIMG Begin: 0xbc0000         Len: 0x600000        
 [8]Part: RECOVERY Begin: 0x11c0000        Len: 0x600000        
 [9]Part: SEC_RO Begin: 0x17c0000        Len: 0x40000         
 [10]Part: MISC Begin: 0x1800000        Len: 0xc0000         
 [11]Part: LOGO Begin: 0x18c0000        Len: 0x100000        
 [12]Part: EXPDB Begin: 0x19c0000        Len: 0x200000        
 [13]Part: FAT Begin: 0x1bc0000        Len: 0x1400000       
 [14]Part: ANDROID Begin: 0x2fc0000        Len: 0x11800000      
 [15]Part: CACHE Begin: 0x147c0000       Len: 0x700000        
 [16]Part: USRDATA Begin: 0x14ec0000       Len: 0xa700000       
 [17]Part: BMTPOOL Begin: 0xffff0028       Len: 0x0             
 Offset: 0x1f598000       Count: 18
 Detecting format adress....wait!
 
 FORMAT NAND FLASH :  BEGIN: 0x147c0000       - LEN: 0x700000        
 FORMAT NAND FLASH :  BEGIN: 0x14ec0000       - LEN: 0xa700000       
Format Range: 0X14EC0000       ~ 0X1F5BFFFF      
Format Size: 1.30Gb

Bad Blocks: 0
Error Blocks: 2
Total Blocks: 1336

Bad/Error Block Ratio: (0.150%)

 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

Stay Tune!
More Developing!!
More coming!!!

Bro
AZHERGOGA007

[Tabu43]

i need this file? plz share