karbonn a1+ how to flash hang karbonn mono
 

karbonn a1 how to flash hang karbonn mono

thanks in advance



wbr ; tejaram

DOWNLAOD CWM RECOVERY - http://www.mediafire.com/?3d7g6w7buu8fpg1

AND DO HARD REST OR UPDATE FROM SD

1. Download and place the ClockworkMod Recovery archive on your Desktop.

2. Extract files from the archive to your Desktop. Do NOT touch any files just yet.

3. Turn OFF your device.

4. While the device’s turned OFF, press and hold the Volume UP+Power buttons together.

5. Connect the device to your PC when the green screen appears.

6. Double-click on the cwm recovery.bat file you extracted from the archive.

7. It should flash the CWM recovery on your device.

8. Once it’s done, reboot the device.

this og tool and flasher

Tool Link:
Download A1+sw tool 0807.zip from Sendspace.com - send big files the easy way

S/w link for New H/W version : 2.0.2:
Download PZ286FM_KMOEB_karbonn_A1_FOREIGN_V2.0.2.rar from Sendspace.com - send big files the easy way

S/w link for Old H/W version : 2.0.3:
Download A1+ PZ186FM_KMOEB_karbonn_A1_FOREIGN_V2.0.3 NEW Dt.01.12.12.rar from Sendspace.com - send big files the easy way

Nice information. I really need those files.

driver not working? please driver need..

how A1+ phone goes in download mode for flashing

plz upload in mediafire plz plz plz





i am not ready to download from sendspace

please provide how to flash

select flashfile in flasher
power off set

stat ...connect cable.....and press power on

need flasher & downloader for hw ver 4.0.0
sw ver 1.0.6

after try this not sucsess seen green screen :confused: & still restart karbonn logo :confused::confused:

but when i try to press volume - & power its goes to download mode but flashing not sucsess .

plz share process how to flash { update } . its restart at logo . thanxx in advance

REOMOVE UR SPD DRIVER BOSS....CLEAN PC JUST CONNECT CABLE PRESS POWER ON

NO NEED press volume - & power its goes to download mode

A1 Plus_Download Tool_Latest - Download - 4shared - rana abbu
USE THIS FLASHER ONLY

ITS A SPD TYPE CPU NEED TO CONNECT USB MODIFIED , OPEN UR CABLE U WILL FIND 2WIER BLACK AND WHITE , U WILL FIND ONE EMPTY PIN IN CONNECTOR SOLDER UR BLACK WIER IN THAT BLANK PIN, NOW UR PHONE WILL CONNECT IT WILL ASK FOR SPD DRIVER GIVE DRIVER THEN FLASH IN OG TOOL AND FILE

This cable u need to use for a1+
 

Its hand made diagram. Now a1+ plus will boot without fails. I have forgotten to mention about cable , iam sorry for that. Hope all now enjoy flash ing

very very thanx full to dear akhil_bbsr . my set recover with ur instructions ;) . thanxx again dear


screenshot : - http://img13.imageshack.us/img13/7561/karbonna1.jpg

Uploaded with ImageShack.us