Karbonn A21 Dead. [Solution Need]

[sachin47]

bp firmware folder inside .hex and .mbn file name
open bp firmware folder need downlode link hlp

[mindAndroid]

can you please send link to download bp firmware for karbone A21

[maha-gsm]

Anyone faced this problem, anyone have solution.
This is very urgent.
Reply

[sachin8615]

i also face this problem plz hlllllllllllllllllllllllllllllllllllp me

[.::TEJARAM::.]

read this

http://forum.gsmhosting.com/vbb/f824...-help-1672892/

Karbonn A21 gets Clockworkmod Recovery port; How to flash - Droidiser

[royal_electronics]

plz share karbonn a21 bp firmware . need urgent . thanxx in advance

[narangmoga]

After get boot repair got qualcom 9006 now how to full flash

[krishneshl]

Hey i have karbonn a21
The phone is not switching on
I tries power + vol+
power + vol-
WHEN I CONNECT IT THROUGH USB. THE PC
DOESN'T SHOW ANY THING
like couldn't install the driver or failed
totally nothing
Can you please help me

[alluseme]

Sir i have bricked micromax a111 and my phone is detected as qualcomm 9008 port, but i dont have flaire revival tool for my phone , can you help me out...?

[drjam_]

Intend for followingbthe section in downloadmode lesstion

[MyGSM World]

Originally Posted by drjam_

Intend for followingbthe section in downloadmode lesstion

Dear Friend,

Write Clear Please. Can't Understand Your Above Sentence.

[rehansk8879]

Originally Posted by Umesh_Arora

bro you need karbonn a21 bp firmware

press vol down + power
if mobile same as pic
insert usb
install driver
see in device manager
qualcom 9006 port
use emmc write tool with bp firmware
after write imei your mobile on
if not on press volup power,this time your mobile enter in fast boot mode( green )
then mobile flash with ap firmware


..........................
if mobile totally dead & device manager qualcomm 9008 com appear
then use qpst tool
and rename this two filename in qpst tool according to your phone bp firmware
bp firmware folder inside .hex and .mbn file name
open bp firmware folder
select .hex file rename option and copy name and paste in qpst phone program flasher name same as pic
mbn file name copy and past in qpst tool
boot image mbn file




load xml & patch file in a21 bp firmware same as pic



select bp firmware in path 2



press download

after this prosess
your mobile not on
your mobile enter in qpst download mode or fast boot mode and see in device manager
qualcom 9006 port appear(auto convert 9008 to 9006)

if enter qpst download mode
agan flash bp firmware with emmc download tool
then write ap in fast boot mode

Thank you very much #Umesh Sir.

Dead Karbonn Titaium s1 is alived by this method
i have just rename here is screen shot.



bp firmware.



Then i flashed phone via fastboot.
successfull alived.

RegaRds
Rehan shaikh.

[gotisoda]

no on pice how to conect fastboot mode

[MyGSM World]

Originally Posted by gotisoda

no on pice how to conect fastboot mode

Dear Friend,

Press & Hold Volume Up Then Power On/Off Key, You'll See FastBoot Mode On LCD.

[rafiq alraza]

I am Getting This Error please help