Alcatel 903 unlock problem [ANSWERED] - GSM-Forum

fun · 03-10-2013, 01:20

Alcatel 903 read codes or direct unlock error.
All drivers installed. Tried on Windows XP and Windows 7.

kaller1 · 03-10-2013, 07:59

Solution by orbita:

Meta port driver not detected.

Run again software, phone will stuck in logo and will apair new cdc port(see in device manager), install driver for this new port.
After run again procedure.
Drvivers download from here:
MT65x3_USB_VCOM_DRIVERS

fun · 03-10-2013, 19:06

Quote:

Originally Posted by kaller1

Solution by orbita:

Meta port driver not detected.

Run again software, phone will stuck in logo and will apair new cdc port(see in device manager), install driver for this new port.
After run again procedure.
Drvivers download from here:
MT65x3_USB_VCOM_DRIVERS

Thank you for respond.
The problem is what phone not going to stuck on logo mode, just starts charging the phone.

**orbita** · 03-10-2013, 19:48

Check please if in device manager is not marked with !drivers for this phone.
Can be some driver conflict.

For this phones preloader will show for 3..5 sec and after if not sened command to go in meta mode phone will start to charge.

fun · 03-10-2013, 19:49

Quote:

Originally Posted by orbita

Check please if in device manager is not marked with !drivers for this phone.
Can be some driver conflict.

In yellow marked only NCK Box smart card.

**orbita** · 03-10-2013, 19:52

Can you contact me directly?
yahoo messenger : [email protected]

lets see where is problem.

Leave device manager opened, and with phone powered off insert usb cable.
See if device show port corect.

Forget to say....be sure exe is opened in admin mode.

fun · 03-10-2013, 20:02

Quote:

Originally Posted by orbita

Can you contact me directly?
yahoo messenger : [email protected]

lets see where is problem.

Leave device manager opened, and with phone powered off insert usb cable.
See if device show port corect.

In device manager its connecting but after few moments phone goes to charging mode and cannot see any ports for phone.

fun · 03-10-2013, 20:38

I have tried these drivers on Windows 7 and Windows XP.
MT65x3_USB_CDC_VCOM_drivers
Alcatel USB_CDC_VCOM_drivers from support
Phone doesn’t freeze on logo but goes to charging mode.

**orbita** · 03-10-2013, 20:41

ok i'am tested here, it's drivers problem.

https://hotfile.com/dl/197750776/976...river.rar.html
here is preloader drivers for your phone.

if still have problems with installing drivers, download
http://www.alcatelonetouch.com/globa...-7-3-setup.exe
and install, exe will install auto drivers for your phone

fun · 03-11-2013, 00:46

Quote:

Originally Posted by orbita

ok i'am tested here, it's drivers problem.

https://hotfile.com/dl/197750776/976...river.rar.html
here is preloader drivers for your phone.

if still have problems with installing drivers, download
http://www.alcatelonetouch.com/globa...-7-3-setup.exe
and install, exe will install auto drivers for your phone

With these drivers from setup
one-touch-upgrade-s-2-7-3-setup
All done in one short.
Actually I have unlocked this phone before with other tool just wanted to test with NCK Box.

Thanks to NCK team for grate support.

03-10-2013, 01:20	#1 (permalink)
fun No Life Poster Join Date: Feb 2005 Location: Ireland Posts: 1,396 Member: 117145 Status: Offline Sonork: 1617520 Thanks Meter: 382	Alcatel 903 unlock problem [ANSWERED] Alcatel 903 read codes or direct unlock error. All drivers installed. Tried on Windows XP and Windows 7.

03-10-2013, 19:52	#6 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Can you contact me directly? yahoo messenger : [email protected] lets see where is problem. Leave device manager opened, and with phone powered off insert usb cable. See if device show port corect. Forget to say....be sure exe is opened in admin mode. Last edited by orbita; 03-10-2013 at 20:01.

03-10-2013, 20:41	#9 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	ok i'am tested here, it's drivers problem. https://hotfile.com/dl/197750776/976...river.rar.html here is preloader drivers for your phone. if still have problems with installing drivers, download http://www.alcatelonetouch.com/globa...-7-3-setup.exe and install, exe will install auto drivers for your phone Last edited by orbita; 03-10-2013 at 20:48.

03-10-2013, 07:59	#2 (permalink)
kaller1 No Life Poster Join Date: May 2012 Location: NCK Team Posts: 1,319 Member: 1761928 Status: Offline Sonork: 100.1626169 Thanks Meter: 804	Solution by orbita: Meta port driver not detected. Run again software, phone will stuck in logo and will apair new cdc port(see in device manager), install driver for this new port. After run again procedure. Drvivers download from here: MT65x3_USB_VCOM_DRIVERS

03-10-2013, 19:48	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Check please if in device manager is not marked with !drivers for this phone. Can be some driver conflict. For this phones preloader will show for 3..5 sec and after if not sened command to go in meta mode phone will start to charge.

03-10-2013, 20:38	#8 (permalink)
fun No Life Poster Join Date: Feb 2005 Location: Ireland Posts: 1,396 Member: 117145 Status: Offline Sonork: 1617520 Thanks Meter: 382	I have tried these drivers on Windows 7 and Windows XP. MT65x3_USB_CDC_VCOM_drivers Alcatel USB_CDC_VCOM_drivers from support Phone doesn’t freeze on logo but goes to charging mode.