Alcatel OT316 after unlock no network (no service) [ANSWERED]

[Doktor666]

Hello everybody!
I flashed one OT316 with SPD_TCL_SINGLESIM_316_unlocked.spd from support. After it I immediately flash it with SPD_TCL_SINGLESIM_316_EN_HU_Vodafone_locked.spd with unchecked Format user data (I need hungarian (Magyar) language). There is Magyar language in phone but it is not registered on network. IMEI is ok. I try this procedure with second one but after flashing with unlocked firmware I turn it on (network is ok). And after flashing with hungarian firmware network is ok.
How can i restore network on first one?

[kamel gsm]

check format user data

[Doktor666]

I try with checked Format UserData. Phone becomes network locked (It was locked before). I need unlock phone and flash with hungarian language. I worked on this instruction Alcatel OT316 unlock by flash, without lost important languages: But I forget: 5. After flashing done, power on the phone with sim card, after power off. And now my phone without network. How can I restore saved NV file?

[kaller1]

Reflash the phone with vodafone locked fw, power on phone wit sim, after repeat the unlock procedure. Dont forget power on phone with sim whereas unlocked fw writing done.

BR

[Doktor666]

This method didn't help for me. I flashed locked firmware and powered on with accepted sim (no network). After it I flashed with unlocked firmware (no network). Program saved .nv-file every time. How can I restore this file?

[orbita]

Hi Doktor666

To perform flash on ot316 you must follow this steps.

1.Open nckdongle exe.
2.Prepare your phone.
3.Check format userdata(recomened when you make firmware update).
4.Select file for flash and perform flash.

On my test phone i'am tested personally all firmwares and network after each flash.

[Doktor666]

Originally Posted by orbita

On my test phone i'am tested personally all firmwares and network after each flash.

But if You flashed with unlocked firmware and didn't powered on phone and after it flashed locked firmware with another language with unchecked Format user data You lost network on your phone. If You power on phone after each flash you don't lose network. Try to simulate this situation. And after it try to recover network.

[orbita]

Hi Doktor666.
Perform steps enaumerated above and phone will work.

If you want to try kaller1 trick, perform this trick corectly.
1.You must flash phone with unlocked firmware with format checked.
2.You must power on phone and check if all ok(with sim card inside).
3.You must flash 1051 firmware with HU language with unckeded format.

[Doktor666]

Originally Posted by orbita

Hi Doktor666.
Perform steps enaumerated above and phone will work.

If you want to try kaller1 trick, perform this trick corectly.
1.You must flash phone with unlocked firmware with format checked.
2.You must power on phone and check if all ok(with sim card inside).
3.You must flash 1051 firmware with HU language with unckeded format.

kaller1 trick I tried. Didn't help for me. With Vodafone SIM no network. After flash with unlocked firmware - no network. IMEI good.

[orbita]

Then you make some wrong.
You newer post any exe log and all time say....not work.
To understand where is problem need to see...where is problem.

[orbita]

I'am just simulated exactly steps posted by kaller1.
Result...see above

[Doktor666]

Here is logs:

Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press "dial" key while inserting the battery.
Detected: SCI USB2Serial (COM8)
Download mode ok.
BOOT: Spreadtrum Boot Block version 2.0
Sending loader, wait.
BOOT OK: Spreadtrum Boot Block version 1.2
CPU: 6610
Changing Baud.
Selected firmware: SPD_TCL_SINGLESIM_316_unlocked.spd
Reading NV.
IMEI 1: 866046014317578
IMEI 2: 352751019523267
Backup saved: backup\spd_phones\866046014317578_saved_nv_1.bin
Start write file: nvitem_release.bin
Write File Done.
Format OK.
Start write file: flash_spd_6600.bin
Write File Done.
Flashing done.
-------------------------- 

Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press "dial" key while inserting the battery.
Detected: SCI USB2Serial (COM8)
Download mode ok.
BOOT: Spreadtrum Boot Block version 2.0
Sending loader, wait.
BOOT OK: Spreadtrum Boot Block version 1.2
CPU: 6610
Changing Baud.
Selected firmware: SPD_TCL_SINGLESIM_316_EN_HU_Vodafone_locked.spd
Reading NV.
IMEI 1: 866046014317578
IMEI 2: 352751019523267
Backup saved: backup\spd_phones\866046014317578_saved_nv_2.bin
Start write file: nvitem_release.bin
Write File Done.
Warning, format userarea disabled, skip format.
Start write file: flash_spd_6600.bin
Write File Done.
Flashing done.
--------------------------

I flashed without turning on phone betweеn flash processes. And now no network.

[orbita]

Check please this link.
http://forum.gsmhosting.com/vbb/10027258-post8.html
Take special attention to step 2.

[Doktor666]

Originally Posted by orbita

Check please this link.
http://forum.gsmhosting.com/vbb/10027258-post8.html
Take special attention to step 2.

Step 2 checked - not ok - no network.

[Doktor666]

Mr. orbita answer me, how to recover phone. With locked firmware and accepted Vodafone SIM no network. With unlocked firmware no network. Can I restore 866046014317578_saved_nv_1.bin? Or what I must to do now?