Big thanks to NCK Team [USER REPORT] ★★★★★ - GSM-Forum

Biscosunny · 08-03-2018, 04:34

Tecno Ca6 hang on camon logo after wipe userdata.. tried this but still hang on logo

Action : Reset to factory default.
Selected Model: 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.1
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[5]Detected: PreLoader USB VCOM Port (COM5)
\\?\usb#vid_0e8d&pid_2000#5&11e86b3&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_2007\5&11E86B3&0&3
Start sync target, waiting responce.....
ChipID: MT6737T,S01
Using Algo 2.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
All done.

But solved with your Tecno Ca6 file on support area...really appreciate you.

Exe version: NCKDongle AndroidMTK 2.5.9.1
Scenario: [0]Safe Flash
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM5)
Boot mode: Preloader
Using Algo 2.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM6)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done

Thanks so much. wishing more helio cpu signed files.

08-03-2018, 04:34	#1 (permalink)
Biscosunny Freak Poster Join Date: Nov 2012 Location: Lagos, Nigeria Posts: 314 Member: 1846240 Status: Offline Thanks Meter: 86	Big thanks to NCK Team [USER REPORT] ★★★★★ Tecno Ca6 hang on camon logo after wipe userdata.. tried this but still hang on logo Action : Reset to factory default. Selected Model: 0-By CPU:ELBRUS Exe version: NCKDongle AndroidMTK 2.5.9.1 Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [5]Detected: PreLoader USB VCOM Port (COM5) \\?\usb#vid_0e8d&pid_2000#5&11e86b3&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [11]META Port Detected: MediaTek USB VCOM (Android) (COM11) USB\VID_0E8D&PID_2007\5&11E86B3&0&3 Start sync target, waiting responce..... ChipID: MT6737T,S01 Using Algo 2. Resetting phone step 1, wait.... Resetting phone step 2, wait.... ClearValue ok. FormatTCard ok. All done. But solved with your Tecno Ca6 file on support area...really appreciate you. Exe version: NCKDongle AndroidMTK 2.5.9.1 Scenario: [0]Safe Flash Will be used loader: MTK_AllInOne_DA_SP.bin Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM5) Boot mode: Preloader Using Algo 2. Scatter file loaded, not need emmi. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6737T BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42 EMMC FW VERSION: 03:00:00:00:00:00:00:00 EMMC CID: 150100514536334D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM6) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Flash EMMC Algo Start. Preloader backup already exist, skip saving. Starting flash. Send preloader... Download firmware to flash now... Wait untill phone will start charging. All done Thanks so much. wishing more helio cpu signed files.