EKO g50e wont boot up - GSM-Forum

NWJ · 08-17-2018, 17:06

phone wont boot up #Fail

EXE: NckDongle Spreadtrum Module 0.5
SELECTED: SC7720EA_EMMC 5.x
ACTION: Reset FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM115)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
Wrong responce.
Wrong responce or partition not active.
Removing frp, wait...
[0]Procesing error.
Total Time: 00:00:36
Done.

successnbd · 08-17-2018, 17:09

remove battery and insert back
but it inbuilt battery, press and hold all buttons together

successnbd · 08-17-2018, 17:10

if it is using an inbuilt battery press and hold all buttons together for 30 sec

NWJ · 08-17-2018, 17:17

it is not turning on

NWJ · 08-17-2018, 17:30

The battery was dead hahhah

08-17-2018, 17:06	#1 (permalink)
NWJ Freak Poster Join Date: Jan 2012 Location: Jamaica Posts: 209 Member: 1710758 Status: Offline Thanks Meter: 55	EKO g50e wont boot up phone wont boot up #Fail EXE: NckDongle Spreadtrum Module 0.5 SELECTED: SC7720EA_EMMC 5.x ACTION: Reset FRP Start Detect phone. Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. For some phones need to Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SCI USB2Serial (COM115) BOOT: SPRD3 Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. Reading extended info, wait... Wrong responce. Wrong responce or partition not active. Removing frp, wait... [0]Procesing error. Total Time: 00:00:36 Done.

08-17-2018, 17:09	#2 (permalink)
successnbd No Life Poster Join Date: Oct 2017 Posts: 706 Member: 2766801 Status: Offline Thanks Meter: 182	remove battery and insert back but it inbuilt battery, press and hold all buttons together

08-17-2018, 17:10	#3 (permalink)
successnbd No Life Poster Join Date: Oct 2017 Posts: 706 Member: 2766801 Status: Offline Thanks Meter: 182	if it is using an inbuilt battery press and hold all buttons together for 30 sec

08-17-2018, 17:17	#4 (permalink)
NWJ Freak Poster Join Date: Jan 2012 Location: Jamaica Posts: 209 Member: 1710758 Status: Offline Thanks Meter: 55	it is not turning on

08-17-2018, 17:30	#5 (permalink)
NWJ Freak Poster Join Date: Jan 2012 Location: Jamaica Posts: 209 Member: 1710758 Status: Offline Thanks Meter: 55	The battery was dead hahhah