emporia select v99-ef unlock? - GSM-Forum

trenac · 01-14-2019, 10:50

can i unlock emporia select v99-ef with nck dongle here is log from phone

EXE VERSION: NCKDongle MTK Tool 1.50
DA version: 5.1428.00.00
USER SELECTION : BOOT INFO.
MODEL SELECTED : MT6276
PHONE MUST BE OFF WITH BATTERY INSIDE.
Connect phone in boot mode ...
Com port ok : COM6
Phone detected...Please wait
Download DA now...You can release power on
CHANGE BAUDRATE SUCCES :S_DONE(0)
DA download finished...Getting phone info
BaseBand CPU: MT6276_S0101
BaseBand CPU Secure Version : FF
FLASH TYPE : NAND
ID: NAND

1Gb) [TOSHIBA] TC58NYG0S8C size:0x08000000
INT RAM: 672Kb
RAM: 512Mb DRAM
BOOT STYLE :S_NAND_FLASH_BOOT(1034)
NAND FAT Ranges = 0x04000000 length:0x04000000
Disconnecting phone :S_DONE(0)
ALL DONE.

trenac · 01-14-2019, 11:25

i try direct unlock phone was unlocked but now is restarting when i make call

USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM6
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM6)
BaseBand CPU : MT6276
SW_VER : V99_V1.30D
HW_VER : V99_HW_V2.0
Meta mode conected ok, start reading phone....
Phone imei[1] : 353369051235259
Phone imei[2] : 353369051235259
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

slavetto · 02-09-2019, 12:06

and did u find firmware for this phone i have same problem

erdal__comak · 04-15-2019, 11:18

Which cpu yu did you choose? I couldn't find the model mt6276.

01-14-2019, 10:50	#1 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	emporia select v99-ef unlock? can i unlock emporia select v99-ef with nck dongle here is log from phone EXE VERSION: NCKDongle MTK Tool 1.50 DA version: 5.1428.00.00 USER SELECTION : BOOT INFO. MODEL SELECTED : MT6276 PHONE MUST BE OFF WITH BATTERY INSIDE. Connect phone in boot mode ... Com port ok : COM6 Phone detected...Please wait Download DA now...You can release power on CHANGE BAUDRATE SUCCES :S_DONE(0) DA download finished...Getting phone info BaseBand CPU: MT6276_S0101 BaseBand CPU Secure Version : FF FLASH TYPE : NAND ID: NAND1Gb) [TOSHIBA] TC58NYG0S8C size:0x08000000 INT RAM: 672Kb RAM: 512Mb DRAM BOOT STYLE :S_NAND_FLASH_BOOT(1034) NAND FAT Ranges = 0x04000000 length:0x04000000 Disconnecting phone :S_DONE(0) ALL DONE.

01-14-2019, 11:25	#2 (permalink)
trenac No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49 Posts: 1,741 Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316	i try direct unlock phone was unlocked but now is restarting when i make call USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM6 Phone detected...Please wait Conected ok with target ... Reopen comport(COM6) BaseBand CPU : MT6276 SW_VER : V99_V1.30D HW_VER : V99_HW_V2.0 Meta mode conected ok, start reading phone.... Phone imei[1] : 353369051235259 Phone imei[2] : 353369051235259 UNLOCK SIM[1]: Unlock ok sim[1] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

02-09-2019, 12:06	#3 (permalink)
slavetto Junior Member Join Date: Jan 2007 Location: Macedonia Age: 40 Posts: 23 Member: 434031 Status: Offline Thanks Meter: 1	and did u find firmware for this phone i have same problem

04-15-2019, 11:18	#4 (permalink)
erdal__comak Junior Member Join Date: Apr 2006 Location: turkey PAZARCIK Posts: 20 Member: 255001 Status: Offline Thanks Meter: 0	Which cpu yu did you choose? I couldn't find the model mt6276.