flash done still vibration only - GSM-Forum

Vahidpappali · 05-06-2018, 13:32

Flash files count is :10
Action : Firmware update.
Selected Model: Huawei: Ascend Y600-U20
Exe version: NCKDongle AndroidMTK 2.5.8.6
Scenario: [5]Full format + Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48344731 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0xc00000 - LEN: 0xe8400000
Download firmware to flash now...
Wait untill phone will start charging.
All done.

solution

**orbita** · 05-06-2018, 13:41

Solution is very simple, you must perform hardware repair.

gorlan912 · 05-10-2018, 00:03

Try another flash file, i had the problem too with an y540, after flashing with other file phone boots normally.

05-06-2018, 13:32	#1 (permalink)
Vahidpappali No Life Poster Join Date: Jul 2016 Location: Gods.On.Country Posts: 639 Member: 2602890 Status: Offline Sonork: NOTINSTALLED Thanks Meter: 230	flash done still vibration only Flash files count is :10 Action : Firmware update. Selected Model: Huawei: Ascend Y600-U20 Exe version: NCKDongle AndroidMTK 2.5.8.6 Scenario: [5]Full format + Full Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM5) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... Using Algo 1. ---------------------------------------------------- BaseBand CPU :MT6572 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) HYNIX 0x483447316404 EMMC FW VERSION: 05:00:00:00:00:00:00:00 EMMC CID: 90014A48344731 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9c00000 [3.652 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Flash EMMC Algo Start. Preloader backup already exist, skip saving. Starting flash. FORMAT EMMC FLASH : BEGIN: 0xc00000 - LEN: 0xe8400000 Download firmware to flash now... Wait untill phone will start charging. All done. solution

05-06-2018, 13:41	#2 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Solution is very simple, you must perform hardware repair.

05-10-2018, 00:03	#3 (permalink)
gorlan912 Junior Member Join Date: Mar 2018 Posts: 25 Member: 2821572 Status: Offline Thanks Meter: 1	Try another flash file, i had the problem too with an y540, after flashing with other file phone boots normally.