HELP: Alcatel one touch 4010A in logo [ANSWERED] - GSM-Forum

Hacker84 · 10-12-2013, 17:40

Please i need to know how repair soft in alcatel one touch 4010A, because only turn on in logo, and i have another one alive, and i would like to read fullflash, but i dont know the process to read flash. or if anybody have the flash to reapir my phone.

thanks in advance.

iggie32 · 10-12-2013, 18:04

Try to hard reset, . Hold v0l+ + power on and choice wipe data. . . . Or if u have a piranha box try to wipe. . .

Hacker84 · 10-12-2013, 18:56

Quote:

Originally Posted by iggie32

Try to hard reset, . Hold v0l+ + power on and choice wipe data. . . . Or if u have a piranha box try to wipe. . .

Not work like that, the phone is bricked.

**orbita** · 10-12-2013, 22:46

Read flash supported only in EMMC phones , in NAND phones not supported.
Post phone pid please.

Hacker84 · 10-14-2013, 18:54

Quote:

Originally Posted by orbita

read flash supported only in emmc phones , in nand phones not supported.
Post phone pid please.

alcatel 4010a
pid: 4010a-2aavc01-s50

**orbita** · 10-14-2013, 20:49

Download from support firmware and try to flash phone.

Hacker84 · 10-16-2013, 23:15

Quote:

Originally Posted by orbita

Download from support firmware and try to flash phone.

Downloading, i go to test and i let you know. thx

Hacker84 · 10-17-2013, 21:31

Quote:

Originally Posted by orbita

Download from support firmware and try to flash phone.

I try to flash the phone, but get that error.

Any solution?

**orbita** · 10-17-2013, 21:45

Yes.
1.Enable debug log in service tab to see exactly what problems have phone.
2.No valid table meen most posible you have problem with flash chip, cpu, bad soldering and so on.

If phone have hardware errors , usually this can't be solved by software.

Hacker84 · 10-17-2013, 23:35

Quote:

Originally Posted by orbita

Yes.
1.Enable debug log in service tab to see exactly what problems have phone.
2.No valid table meen most posible you have problem with flash chip, cpu, bad soldering and so on.

If phone have hardware errors , usually this can't be solved by software.

here is de log debbug.

**orbita** · 10-18-2013, 07:10

Most posible phone have hardware error.

Flash ic damaged, bad soldered.
Try disable format and flash, see after what error displayed.

10-12-2013, 17:40	#1 (permalink)
Hacker84 Freak Poster Join Date: Jun 2008 Location: COLOMBIA Posts: 432 Member: 789804 Status: Offline Sonork: 100.1591611 Thanks Meter: 147	HELP: Alcatel one touch 4010A in logo [ANSWERED] Please i need to know how repair soft in alcatel one touch 4010A, because only turn on in logo, and i have another one alive, and i would like to read fullflash, but i dont know the process to read flash. or if anybody have the flash to reapir my phone. thanks in advance.

10-12-2013, 18:04	#2 (permalink)
iggie32 Freak Poster Join Date: Apr 2010 Location: PARADISE IN THE MOON Posts: 178 Member: 1279232 Status: Offline Sonork: jologs Thanks Meter: 12	Try to hard reset, . Hold v0l+ + power on and choice wipe data. . . . Or if u have a piranha box try to wipe. . .

10-12-2013, 22:46	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Read flash supported only in EMMC phones , in NAND phones not supported. Post phone pid please.

10-14-2013, 20:49	#6 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Download from support firmware and try to flash phone.

10-17-2013, 21:45	#9 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Yes. 1.Enable debug log in service tab to see exactly what problems have phone. 2.No valid table meen most posible you have problem with flash chip, cpu, bad soldering and so on. If phone have hardware errors , usually this can't be solved by software.

10-18-2013, 07:10	#11 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	Most posible phone have hardware error. Flash ic damaged, bad soldered. Try disable format and flash, see after what error displayed.