huawei lyo-l02 unlock - GSM-Forum

msmobile · 11-06-2018, 08:44

huawei lyo-l02 unlock

unlock possible?

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
First stage DA fail, aborting
BBCHIP MT6735
[SECURE BOOT]Not supported by exe or wrongly selected, aborting
If model is listed, please select correct model
If model is not listed, use custom DA from phone firmware
Boot Fail.!!!.
All done.

Exe version: NCKBox AndroidMTK 1.8.9.6
Selected model: Huawei Ascend Y5 II[CUN-L02]
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[136]Detected: MediaTek PreLoader USB VCOM (Android) (COM136)
\\?\usb#vid_0e8d&pid_2000#5&2b9922dd&0&11#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[160]META Port Detected: MediaTek USB VCOM (Android) (COM160)
USB\VID_0E8D&PID_2007\5&2B9922DD&0&11
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6735,S01
[AP]APP_VER: LYO-L02C718B127
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V42.P40
[META]HW_VER : HQ6753_65C_B1N_L1_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 861947031620420
Error process simlock info(2)!!
All done.

msmobile · 11-06-2018, 08:58

Exe version: NCKBox AndroidMTK 1.8.9.6
Selected model: Huawei Ascend Y5 II[CUN-L02]
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[136]Detected: MediaTek PreLoader USB VCOM (Android) (COM136)
\\?\usb#vid_0e8d&pid_2000#5&2b9922dd&0&11#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[160]META Port Detected: MediaTek USB VCOM (Android) (COM160)
USB\VID_0E8D&PID_2007\5&2B9922DD&0&11
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6735,S01
[AP]APP_VER: LYO-L02C718B127
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V42.P40
[META]HW_VER : HQ6753_65C_B1N_L1_HW
Phone imei[1] : 861947031620420
Start direct unlock[SIM1]
Simlock data not found(2).
Simlock data not found(2).
Clean Boot flag ok.
All done.

shivapradhan0 · 11-06-2018, 09:03

use chimera or sigma key

**orbita** · 11-06-2018, 12:30

You must select corect model from exe, in your case is huawei lyo-l02.
And need to use flash mode for this model, in new firmwares huawei closed meta mode acces.

**orbita** · 11-06-2018, 12:32

Quote:

Originally Posted by shivapradhan0

use chimera or sigma key

Here is NCK Box section.
If you have some usefull to say on topic, say.
If your only sence of life is to post spam in forum, fly and spam in another sections.

msmobile · 11-07-2018, 06:45

Quote:

Originally Posted by orbita

You must select corect model from exe, in your case is huawei lyo-l02.
And need to use flash mode for this model, in new firmwares huawei closed meta mode acces.

Exe version: NCKBox AndroidMTK 1.8.9.6
Selected model: Huawei Ascend Y6 Pro[TIT-L02]
Error Load Loader, aborting!!

msmobile · 11-07-2018, 07:13

unlocked

Exe version: NCKBox AndroidMTK 1.8.9.6
Selected model: Huawei Ascend Y5 II[CUN-L02]
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM136)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM154)
Region: hw/L02_normal

BOOTLOADER CODE
fastboot oem unlock 5D8C65F29349BECA
Power phone in fastboot mode, press button Enter Bootloader Code and use this code: 5D8C65F29349BECA
In some phones need to enable OEM UNLOCK in Developer options

FRP CODE
fastboot oem frp-unlock 9E0ABB8F8A8A4332
Power phone in fastboot mode, press button Enter FRP Code and use this code: 9E0ABB8F8A8A4332

IMEI[1]: 861947031620420
IMEI[2]: 861947031620420
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:255) Code : 9829852710454194
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

shivapradhan0 · 11-07-2018, 07:51

Quote:

Originally Posted by orbita

Here is NCK Box section.
If you have some usefull to say on topic, say.
If your only sence of life is to post spam in forum, fly and spam in another sections.

really you think what i replied was spam lol.. i just wanted to help your user to figure out solution...no solution replied from you and your team...and sorry for i mentioned other team product on your section..but that was not a spam..they works..at last i am also a nck product user

**orbita** · 11-07-2018, 08:16

Quote:

Originally Posted by shivapradhan0

really you think what i replied was spam lol.. i just wanted to help your user to figure out solution...no solution replied from you and your team...and sorry for i mentioned other team product on your section..but that was not a spam..they works..at last i am also a nck product user

In this case was enough to say, select correct model and use flash mode.
If you are so experienced user you must know, huawei must be selected exactly.
Also new LYO-02 firmwares not allow meta mode(some other models also)
But instead of be profesional, you decided to spam in our section.
Be sure if you will make wrong selection in tool what you promote so hard

, will not work also.

11-06-2018, 08:44	#1 (permalink)
msmobile No Life Poster Join Date: Apr 2006 Location: Gujrat (India) Age: 38 Posts: 907 Member: 253882 Status: Offline Sonork: 100.1585698 Thanks Meter: 242	huawei lyo-l02 unlock huawei lyo-l02 unlock unlock possible? Action : Boot Info. Selected 0-By CPU:ELBRUS Exe version: NCKBox AndroidMTK 1.8.9.2 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM5) Boot mode: Preloader Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... First stage DA fail, aborting BBCHIP MT6735 [SECURE BOOT]Not supported by exe or wrongly selected, aborting If model is listed, please select correct model If model is not listed, use custom DA from phone firmware Boot Fail.!!!. All done. Exe version: NCKBox AndroidMTK 1.8.9.6 Selected model: Huawei Ascend Y5 II[CUN-L02] Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [136]Detected: MediaTek PreLoader USB VCOM (Android) (COM136) \\?\usb#vid_0e8d&pid_2000#5&2b9922dd&0&11#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [160]META Port Detected: MediaTek USB VCOM (Android) (COM160) USB\VID_0E8D&PID_2007\5&2B9922DD&0&11 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6735,S01 [AP]APP_VER: LYO-L02C718B127 Making target channel configuration, wait... Making tunnel configuration, wait... Rebooting to meta, wait.... [META]BaseBand CPU : MT6735, E00 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V42.P40 [META]HW_VER : HQ6753_65C_B1N_L1_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 861947031620420 Error process simlock info(2)!! All done. Last edited by msmobile; 11-06-2018 at 08:54.

11-06-2018, 08:58	#2 (permalink)
msmobile No Life Poster Join Date: Apr 2006 Location: Gujrat (India) Age: 38 Posts: 907 Member: 253882 Status: Offline Sonork: 100.1585698 Thanks Meter: 242	Exe version: NCKBox AndroidMTK 1.8.9.6 Selected model: Huawei Ascend Y5 II[CUN-L02] Action: Unlock Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [136]Detected: MediaTek PreLoader USB VCOM (Android) (COM136) \\?\usb#vid_0e8d&pid_2000#5&2b9922dd&0&11#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [160]META Port Detected: MediaTek USB VCOM (Android) (COM160) USB\VID_0E8D&PID_2007\5&2B9922DD&0&11 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6735,S01 [AP]APP_VER: LYO-L02C718B127 Making target channel configuration, wait... Making tunnel configuration, wait... Rebooting to meta, wait.... [META]BaseBand CPU : MT6735, E00 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V42.P40 [META]HW_VER : HQ6753_65C_B1N_L1_HW Phone imei[1] : 861947031620420 Start direct unlock[SIM1] Simlock data not found(2). Simlock data not found(2). Clean Boot flag ok. All done.

11-06-2018, 09:03	#3 (permalink)
shivapradhan0 Freak Poster Join Date: Sep 2009 Location: NEPAL Posts: 354 Member: 1128042 Status: Offline Sonork: 100.1666710 Thanks Meter: 155	use chimera or sigma key

11-06-2018, 12:30	#4 (permalink)
orbita Product Manager Join Date: Apr 2002 Location: nckDongle Posts: 13,325 Member: 11170 Status: Offline Sonork: 1603694 Thanks Meter: 6,944	You must select corect model from exe, in your case is huawei lyo-l02. And need to use flash mode for this model, in new firmwares huawei closed meta mode acces.

11-07-2018, 07:13	#7 (permalink)
msmobile No Life Poster Join Date: Apr 2006 Location: Gujrat (India) Age: 38 Posts: 907 Member: 253882 Status: Offline Sonork: 100.1585698 Thanks Meter: 242	unlocked Exe version: NCKBox AndroidMTK 1.8.9.6 Selected model: Huawei Ascend Y5 II[CUN-L02] Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM136) Boot mode: Preloader BBCHIP: 321 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6735 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A483847316505 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM154) Region: hw/L02_normal BOOTLOADER CODE fastboot oem unlock 5D8C65F29349BECA Power phone in fastboot mode, press button Enter Bootloader Code and use this code: 5D8C65F29349BECA In some phones need to enable OEM UNLOCK in Developer options FRP CODE fastboot oem frp-unlock 9E0ABB8F8A8A4332 Power phone in fastboot mode, press button Enter FRP Code and use this code: 9E0ABB8F8A8A4332 IMEI[1]: 861947031620420 IMEI[2]: 861947031620420 Reading security, wait... SIM[1]: Block1(N): Locked (remain:255) Code : 9829852710454194 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Unlocked (remain:255) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Please note, some firmwares can display wrong codes. Some firmwares can be hardlocked. If this happen, perform direct unlock. If direct unlock fail,use reset package from support. If reset package not exist in support,request help in forum. Wait untill phone will start charging. All done.