Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 265 - GSM-Forum

rehmani · 10-19-2015, 13:21

Code:

Module Ver.    : 3.1
Com Port    : COM76 : ZTE CDMA Handset Diagnostics Interface (COM76)
Baud Rate    : 921600
Device    : ZTE S100
Operation    : SP UNLOCK
Port opened.
Compile    : Apr 14 2010 11:36:12
Release    : Oct 24 2006 13:00:00
Hw Ver.    : MTS_S100
ESN    : 80Ezzzzz
MEID    : A10000471zzzzz
MemUnlock    : Success
Build    : QSC6010-SCNRZ-MTS_S100_RBTL40NV1.0.1B02
Detected    : S100
User Code    : 0000
Switching to Offline...
Offline Mode OK.
Sending SPC...
Executing unlock...
Phone successfully unlocked.
Resetting phone...
Port closed.
Operation finished.
Elapsed Time: 00:02
Log saved as \!Log\LOG_15_10_19_17_44_10.log

onz · 10-19-2015, 16:15

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.6.0
Selected phone: MT6571_EMMC
Action : IMEI REPAIR.
IMEI for write : 355287904645904
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(38) : PreLoader USB VCOM Port (COM38)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[43] USB Serial Device (COM43)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V10.P2
HW_VER : LCSH82_WET_JB5_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 355287904645904
IMEI repair Ok

kaller1 · 10-19-2015, 19:23

Code:

Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM (Android) (COM12)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3957524d42 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E3957524D : 0000000000000000
 EMMC UA SIZE: 0x70000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Detected partitions count: 20
 Start dumping flash, this can take up to 1 hour.......
 Start procesing PRELOADER ......
 Start procesing MBR ......
 Reading:  BEGIN: 0x600000         - LEN: 0x200           
 Start procesing EBR1 ......
 Reading:  BEGIN: 0x680000         - LEN: 0x200           
 Start procesing PRO_INFO ......
 Reading:  BEGIN: 0x700000         - LEN: 0x300000        
 Start procesing NVRAM ......
 Reading:  BEGIN: 0xa00000         - LEN: 0x500000        
 Start procesing PROTECT_F ......
 Reading:  BEGIN: 0xf00000         - LEN: 0xa00000        
 Start procesing PROTECT_S ......
 Reading:  BEGIN: 0x1900000        - LEN: 0xa00000        
 Start procesing UBOOT ......
 Start procesing BOOTIMG ......
 Reading:  BEGIN: 0x2380000        - LEN: 0x600000        
 Start procesing RECOVERY ......
 Reading:  BEGIN: 0x2980000        - LEN: 0x600000        
 Start procesing SEC_RO ......
 Reading:  BEGIN: 0x2f80000        - LEN: 0x40000         
 Start procesing LOGO ......
 Start procesing ANDROID ......
 Reading:  BEGIN: 0x3d40000        - LEN: 0x28a00000      
 Backup CACHE disabled, we will skip it....
 Backup USRDATA disabled, we will skip it....
 Backup FAT disabled, we will skip it....
 Saved to : C:\Users\KOKO\Documents\Android_MTK\firmware_backup\0-By CPU_MT6572_EMMC_10_19_2015_19_53_03
 Wait untill phone will start charging.
 All done.

amko · 10-20-2015, 10:00

mtk android...china phones...wiko goa

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.5.9
Selected phone: Wiko Goa
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(240) : PreLoader USB VCOM Port (COM240)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[161] Android Gadget VCOM Driver (COM161)
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&3&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P4
HW_VER : TINNO72_WE_72_KK_HSPA_HW
Phone imei[1] : 357954063******
Phone imei[2] : 357954063******
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done.

rehmani · 10-21-2015, 06:57

Code:

Module Ver.    : 3.1
Com Port    : COM12 : ZTE CDMA Handset Diagnostics Interface (COM12)
Baud Rate    : 921600
Device    : S165
Operation    : Write MEID
Port opened.
Compile    : Mar 02 2012 18:32:58
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.S1
ESN    : 00000000
MEID    : 00000000000000
MemUnlock    : Success.
Build    : V.MTS.S165.B04
Detected    : S165
User Code    : 0000
Writing MEID A000004E4zzzzz
Write success.
New ESN    : 800B6zzz
New MEID    : A000004E4zzzzz
Operation finished.
Port closed.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_10_21_11_08_30.log

rehmani · 10-21-2015, 07:15

blink repair

Code:

Module Ver.    : 3.1
Com Port    : COM87 : HS-USB Wireless Diagnostics 3004 (COM87)
Baud Rate    : 921600
Device    : Haier C380
Operation    : Flash (Emergency)
Port opened.
Preparing phone..
Sending bootloader...
Executing Bootloader...
Bootloader running OK.
Executing background tasks...
Initializing Flash Chip...
Flash Chip    : SPANSION S29VS128Rd
Chip Size    : 16 MB
Flash File    : S029_NOESN_MEID_SPC.bin
File Size    : 16 MB
Writing Flash... (Only_EFS = True)
Write flash finished.
Resetting phone...
Operation finished.
Port closed.
Elapsed Time: 01:49
Log saved as \!Log\LOG_15_10_21_11_41_18.log

meid repair

Code:

Module Ver.    : 3.1
Com Port    : COM87 : HS-USB Wireless Diagnostics 3004 (COM87)
Baud Rate    : 921600
Device    : Haier C380
Operation    : MEID Write
Port opened.
Reading Information...
Compile    : Nov 14 2014 12:07:18
Release    : Jun 25 2009 11:00:00
Hw Ver.    : S029
ESN    : 00000000
MEID    : 00000000000000
BUILD    : HC-C380_R-S029
Writing MEID [A1000025Czzzzz]...
MEID Written Successfully
New MEID    : A1000025Czzzzz
Operation finished.
Port closed.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_10_21_11_42_26.log

rehmani · 10-21-2015, 14:39

Code:

Module Ver.    : 3.1
Com Port    : COM12 : ZTE CDMA Handset Diagnostics Interface (COM12)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : SP UNLOCK
Port opened.
Compile    : Jan 07 2015 09:41:44
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 80E94zzz
MEID    : A000004E9zzzzz
MemUnlock    : Success
Build    : RIC_S194_CAM_RBTL21FV1.1
Detected    : S194
User Code    : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_10_21_14_52_37.log

rehmani · 10-21-2015, 14:41

Code:

Module Ver.    : 3.1
Com Port    : COM12 : ZTE CDMA Handset Diagnostics Interface (COM12)
Baud Rate    : 921600
Device    : S165
Operation    : Write MEID
Port opened.
Compile    : Apr 10 2012 15:17:30
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.S1
ESN    : 00000000
MEID    : 00000000000000
MemUnlock    : Success.
Build    : V.MTS.S165.B04
Detected    : S165
User Code    : 0000
Writing MEID A0000032Dzzzzz
Write success.
New ESN    : 8028Ezzz
New MEID    : A0000032Dzzzzz
Operation finished.
Port closed.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_10_21_19_10_04.log

diph001 · 10-21-2015, 17:28

Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.5.5.8
Selected phone: Digicel max(MT6572)
Action : IMEI REPAIR.
IMEI for write : 863476027558517
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
Detected(12) : PreLoader USB VCOM (Android) (COM12)
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[63] PreLoader USB VCOM (Android) (COM63)
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&2&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P25
HW_VER : ZZTENJ72_WE_72_M536_KK_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [2] 863476027558517
IMEI repair OK.
All done.

rehmani · 10-22-2015, 07:28

Code:

Module Ver.    : 3.1
Com Port    : COM12 : ZTE CDMA Handset Diagnostics Interface (COM12)
Baud Rate    : 921600
Device    : ZTE S165
Operation    : Flash EFS
Port opened.
Compile    : Mar 02 2012 18:32:58
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.S1
ESN    : 00000000
MEID    : A10000xxxxxxxx
MemUnlock    : Success
Build    : V.MTS.S165.B04
Detected    : S165
User Code    : 0000
Setting Download mode...
Mode change OK. Waiting for phone...
Reconnect OK.
Initializing Flash Protocol...
Flash Chip    : NUMONYX M36W0R6050U4ZSd
Chip Size    : 8 MB
Flash File    : SSTL_S165_SP_RBTL40NV1.0.0B04.bin
File Size    : 8 MB
Writing EFS area...
Write EFS finished.
Resetting phone...
Operation finished
Port closed.
Elapsed Time: 01:01
Log saved as \!Log\LOG_15_10_22_11_31_12.log

Code:

Module Ver.    : 3.1
Com Port    : COM12 : ZTE CDMA Handset Diagnostics Interface (COM12)
Baud Rate    : 921600
Device    : S165
Operation    : Write MEID
Port opened.
Compile    : Mar 02 2012 18:32:58
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.S1
ESN    : 00000000
MEID    : 00000000000000
MemUnlock    : Success.
Build    : V.MTS.S165.B04
Detected    : S165
User Code    : 0000
Writing MEID A000003zzzzzzz
Write success.
New ESN    : 802zzzzz
New MEID    : A000003zzzzzzz
Operation finished.
Port closed.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_10_22_11_33_42.log

wsmobile · 10-22-2015, 08:02

Ascend Y330-u01 unlock done

META Port Detected[2523] MediaTek USB VCOM (Android) (COM2523)
USB\VID_12D1&PID_0005&MI_02\7&138ABC5&1&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V15.P10
HW_VER : HUAWEI72_WE_JB3_HSPA_HW
Phone imei[1] : 865705024827030
Phone imei[2] : 865705024827030
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done.

galijus · 10-22-2015, 09:31

galijus · 10-22-2015, 09:36

Petyo · 10-23-2015, 16:37

Samsung A3 (A300FU) unlocked done

UzUnlocker · 10-23-2015, 17:31

MTS 982O unlock done

Quote:

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.5.9
Selected phone: MTC 982O
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(85) : PreLoader USB VCOM Port (COM85)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[59] Android Gadget VCOM Driver (COM59)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&1&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V43.P5
HW_VER : VANZZO72_CWET_KK_HSPA_HW
Phone imei[1] : 354286061874696
Start direct unlock[SIM1]
Wrong data reseived from target!!!!!
CHK reseived:55 CHK Calculated: a5
Direct unlock done

10-19-2015, 16:15	#3962 (permalink)
onz No Life Poster Join Date: Aug 2013 Location: Bulawayo zimbabwe Posts: 1,669 Member: 2012334 Status: Offline Sonork: 100.1658100 Thanks Meter: 777	clone Note3 imei invalid repair done Selected connection metod: Meta Connection Exe version: NCKDongle AndroidMTK 2.5.6.0 Selected phone: MT6571_EMMC Action : IMEI REPAIR. IMEI for write : 355287904645904 Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6572 Phone must be off with battery inside. Please insert USB cable now... Detected(38) : PreLoader USB VCOM Port (COM38) Starting META mode, wait... Restarting, wait.... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. META Port Detected[43] USB Serial Device (COM43) USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002 Start sync target, waiting responce..... BaseBand CPU : MT6582, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V10.P2 HW_VER : LCSH82_WET_JB5_HSPA_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] 355287904645904 IMEI repair Ok

10-20-2015, 10:00	#3964 (permalink)
amko Freak Poster Join Date: Jul 2006 Location: Serbia Age: 46 Posts: 127 Member: 303852 Status: Offline Thanks Meter: 32	wiko goa unlock mtk android...china phones...wiko goa Selected connection metod: META Mode Exe version: NCKDongle AndroidMTK 2.5.5.9 Selected phone: Wiko Goa Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6572 Phone must be off with battery inside. Please insert USB cable now... Detected(240) : PreLoader USB VCOM Port (COM240) Starting META mode, wait... Restarting, wait.... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. META Port Detected[161] Android Gadget VCOM Driver (COM161) USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&3&0002 Start sync target, waiting responce..... BaseBand CPU : MT6572, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P4 HW_VER : TINNO72_WE_72_KK_HSPA_HW Phone imei[1] : 357954063**** Phone imei[2] : 357954063**** Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done All done.

10-22-2015, 09:31	#3972 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	Alcatel ot1013x calculated codes ok

10-22-2015, 09:36	#3973 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	Huawei Y530 unlock done

10-21-2015, 17:28	#3969 (permalink)
diph001 Freak Poster Join Date: Jul 2014 Location: Haiti Posts: 258 Member: 2216186 Status: Offline Sonork: 100.1668130 Thanks Meter: 120	Selected connection metod: Meta Connection Exe version: NCKDongle AndroidMTK 2.5.5.8 Selected phone: Digicel max(MT6572) Action : IMEI REPAIR. IMEI for write : 863476027558517 Scanning for presents meta ports... Meta ports not detected, starting brom stage. Phone must be off with battery inside. Please insert USB cable now... Detected(12) : PreLoader USB VCOM (Android) (COM12) Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. META Port Detected[63] PreLoader USB VCOM (Android) (COM63) USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&2&0002 Start sync target, waiting responce..... BaseBand CPU : MT6572, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P25 HW_VER : ZZTENJ72_WE_72_M536_KK_HSPA_HW Meta mode conected ok, start reading phone.... IMEI to repair: [2] 863476027558517 IMEI repair OK. All done.

10-22-2015, 08:02	#3971 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Ascend Y330-u01 unlock done META Port Detected[2523] MediaTek USB VCOM (Android) (COM2523) USB\VID_12D1&PID_0005&MI_02\7&138ABC5&1&0002 Start sync target, waiting responce..... BaseBand CPU : MT6572, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V15.P10 HW_VER : HUAWEI72_WE_JB3_HSPA_HW Phone imei[1] : 865705024827030 Phone imei[2] : 865705024827030 Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done All done.