Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[nduka]

TECNO M7 WRITE FACTORY FILES DONE

[OSCAR MORENO]

Calculated Codes huawei
Y625 nck team

[ibrajinja]

EXE: NCK BOX v6.4.2
SELECTED : OT-1016G
ACTION: Unlock.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press "Green(call)" key while inserting the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM26)
Download mode ok.
BOOT: SPRD3
Sending loader, wait.
BOOT OK: Spreadtrum Boot Block version 1.2
CPU: 6531
Reading Flash Info, wait...
Flash Size: $400000 Sector Size: $8000
Nvram Start: $3C0000 Nvram Size: $7C00
EFS Start: $3C8000 EFS Size: $38000
PROD_INFO: $3C7C00
SIMK: $3B8000
Model: 1016G-3AE8GB1
[1]Simlock: Locked Counter[10]
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\OT-1016G_359160069940533_saved_nv_1.bin

[razib143]

Wiko Sunny Direct UNlock done..


Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: MT6580
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6580
Phone must be off with battery inside.
Please insert USB cable now...
[92]Detected: PreLoader USB VCOM Port (COM92)
\\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[161]META Port Detected: Gadget CDC VCOM Driver (COM161)
USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8
Start sync target, waiting responce.....
BaseBand CPU : mt6580,S01
BaseBand CPU : MT6580B, E00
SW_VER : MOLY.WR8.W1449.MD.WG.MP.V57.P4
HW_VER : TINNO6580_WE_M_HSPA_HW
Phone imei[1] : 3582350776AAAA
Phone imei[2] : 3582350778AAAA
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

[razib143]

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: HTC 310
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6582
Phone must be off with battery inside.
Please insert USB cable now...
[92]Detected: PreLoader USB VCOM Port (COM92)
\\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[161]META Port Detected: Gadget CDC VCOM Driver (COM161)
USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8
Start sync target, waiting responce.....
BaseBand CPU : MT6582,S01
APP_VER: ALPS.JB5.MP.V1.23
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V19.F4.P6
HW_VER : CCI82_WET_LX83_JB5_HSPA_HW
Phone imei[1] : 35191206196AAAA
Phone imei[2] : 35191206196AAAA
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

[fokal2008]

samsung galaxy s3( i9300 )flashing done with nckbox

Model Selected: GT-I9300
Device detected OK: Modem (COM274)
Downloading..
Total Size: 1574028204
Get PIT for mapping..
Chipset: Mx
Firmware update start..
Loading: boot.img, wait.
Processing: boot.img Size: [5,74 MB] [6017280]
Loading: cache.img, wait.
Processing: cache.img Size: [74,26 MB] [77869408]
lastSequenceBytes: 14954848
Loading: hidden.img, wait.
Processing: hidden.img Size: [104,7 MB] [109781344]
lastSequenceBytes: 15409504
Loading: modem.bin, wait.
Processing: modem.bin Size: [12 MB] [12583424]
Loading: recovery.img, wait.
Processing: recovery.img Size: [7,16 MB] [7506176]
Loading: system.img, wait.
Processing: system.img Size: [1,27 GB] [1359223788]
lastSequenceBytes: 6560748
Loading: tz.img, wait.
Processing: tz.img Size: [156 KB] [159744]
Loading: sboot.bin, wait.
Processing: sboot.bin Size: [866,25 KB] [887040]
Resetting, wait until phone restart.
*************************************
Log saved:
C:\Documents and Settings\top\Mes documents\Avengers\Saved_Logs\GT-I9300_flashing_log_1.txt
Total Time: 00:05:56

[ibrajinja]

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: OT-4015D
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM44)
OTP IMEI: 865149029137097
MODEL FROM PROINFO: 4015D-2CRGUG3
SECRO FROM PROINFO: X6C0UG00AN20
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 14960104
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

[fokal2008]

SAMSUNG GALAXY S5 (SM-G900H)FLASHING DONE WHIT NCKBOX

Model Selected: SM-G900H
Device detected OK: Modem (COM274)
Downloading..
Total Size: 2485832720
Get PIT for mapping..
Chipset: LSI5410
Firmware update start..
  Loading: sboot.bin, wait.
  Processing: sboot.bin Size: [1,09 MB] [1148160]
  Loading: boot.img, wait.
  Processing: boot.img Size: [9,63 MB] [10098960]
  Loading: recovery.img, wait.
  Processing: recovery.img Size: [10,15 MB] [10647824]
  Loading: system.img, wait.
  Processing: system.img Size: [2,22 GB] [2382684400]
lastSequenceBytes: 23388400
  Loading: modem.bin, wait.
  Processing: modem.bin Size: [15,25 MB] [15995392]
  Loading: cache.img, wait.
  Processing: cache.img Size: [55,15 MB] [57827616]
lastSequenceBytes: 26370336
  Loading: hidden.img, wait.
  Processing: hidden.img Size: [7,09 MB] [7430368]
Resetting, wait until phone restart.
************************************* 
Log saved:
C:\Documents and Settings\top\Mes documents\Avengers\Saved_Logs\SM-G900H_flashing_log_3.txt
Total Time: 00:25:02

[alminkad]

Telenor P21unlock ok

[ssony]

http://

BR
SSONY

[ssony]

http://

BR
SSony

[ssony]

http://

[-=C.J.S=-]

StarMobile UP+ IMEI INVALID Repair DONE..

 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.5.7.0
 Selected phone: MT6582
 Action : IMEI REPAIR.
 IMEI[1] for write : 86495----------
 IMEI[2] for write : 86495----------
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6582
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [9]Detected: MediaTek PreLoader USB VCOM Port (COM9) 
 \\?\usb#vid_0e8d&pid_2000#6&8ca65f9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [10]META Port Detected: Gadget CDC VCOM Driver (COM10) 
 USB\VID_0E8D&PID_2007\6&8CA65F9&0&6 
 Start sync target, waiting responce.....
 BaseBand CPU : MT6582,S01
 BaseBand CPU : MT6582, E01
 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34.P19
 HW_VER : DEWAV82_WE_KK_HSPA_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 86495----------
 IMEI repair OK.
 IMEI to repair: [2] 86495----------
 IMEI repair OK.
 Clean Boot flag ok. 
 All done.

[alcatel2045]

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.49
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM5
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM5)
BaseBand CPU : MT6276
SW_VER : 2045X_L2EN_V1.3_150914_CAM30_MCP128_64_FM_BT_AU_OP TUS
HW_VER : HW01
Meta mode conected ok, start reading phone....
Phone imei[1] : 355626068333015
User code(Inactive) : 0000
SIMLOCK INFO[1]:
Block1[N]: Locked (remain:5) Code : 63341670
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.49
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM5
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM5)
BaseBand CPU : MT6276
SW_VER : 2045X_L2EN_V1.3_150914_CAM30_MCP128_64_FM_BT_AU_OP TUS
HW_VER : HW01
Meta mode conected ok, start reading phone....
Phone imei[1] : 355626068333015
Phone imei[2] : 355626068333015
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

[schwantz]

Exe Version: NCK BOX v6.4.2
IMEI checksum seems ok
Model: OT233
IMEI: 867425013XXXXXX
PID: VDPT1(XFB1FG30)
NCK : 2580493091
NSCK: 0015781470
SPCK: 0200860380
SIM : 1778596666
CORPORATE: 1651177010