Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[Zodiaco007]

alcatel OT-5045X unlock done

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.7
Selected model: OT-5045X
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM315)
OTP IMEI: 356627075193342
MODEL FROM PROINFO: 5045X-2AE8GB1
SECRO FROM PROINFO: X7E0CE01BP10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 8331215000605293
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.

[ibrajinja]

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.7
Selected model: MT6571_EMMC
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[287]Detected: MediaTek PreLoader USB VCOM (Android) (COM287)
\\?\usb#vid_0e8d&pid_2000#5&1f775297&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[296]META Port Detected: MediaTek USB VCOM (Android) (COM296)
USB\VID_0E8D&PID_2007\5&1F775297&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6735m,S01
[AP]APP_VER: T29D_MLASTK_A503_V1.1.1
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V16.P8
[META]HW_VER : BR6735_65C_L1_HW
Phone imei[1] : 354167070624985
Phone imei[2] : 354167070624993
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

[ruport]

Unlock metod[2].
Port: SAMSUNG Mobile USB Serial Port (COM20)
Build id: MPSS.DI.2.0.1.c2-00144-M8974AAAAANRZM-1
Version info: Feb 3 201714:28:56Feb 18 201521:00:00AAAAANRZ:d
IMEI: 353916060521853
Unlocking, wait....
Job done, if phone not restart, restart manually

Phone was rooted using cfautoroot in order to complete operations
NCK Box the best ever

[swapan]

Micromax Q340 MT6582 Privacy Protection Reset Done

 Exe version: NCKBox AndroidMTK 1.8.7.8
 Selected model: MT6582
 Action: Reset Privacy
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM7)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A48384731 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Dumping data, wait.
 Value found, procesing[010c][002c0000]
 Resetting phone.
 FORMAT EMMC FLASH :  BEGIN: 0x8ab00000       - LEN: 0x39c00000      
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.

[indergsm]

OPPO A37F PATTERN LOCK READED BY NCK BOX
WITHOUT ANY DATA LOSS
HARDWARE: QUALCOMM Ansdoid Ver- 5.1.1


BR,
INDER

[fokal2008]

UNLOCK MTN SM@RT L860 DONE BY FOKAL2008 WITH NCKBOX

 Selected connection metod: META Mode
 Exe version: NCKBox AndroidMTK 1.8.7.8
 Selected model: MT6735M
 Action: Unlock
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [101]Detected: MediaTek PreLoader USB VCOM Port (COM101) 
 \\?\usb#vid_0e8d&pid_2000#5&1544b92d&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [197]META Port Detected: MediaTek DA USB VCOM (Android) (COM197) 
 USB\VID_0E8D&PID_2007\5&1544B92D&0&7 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6735m,S01
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V16.P2
 [META]HW_VER : LENTK6753_65C_L1_HW
 Phone imei[1] : 356038070596721
 Phone imei[2] : 356038070596739
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok. 
 All done.

[jamohaki]

EXE: NckBox Spreadtrum Module 0.4
SELECTED: SC6530
ACTION: Format.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press boot key while inserting the battery.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM8)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6530
FlashId: GigaDevice: [0x800000]GD25LQ64B
Reading Flash Info, wait...
Flash Size: $800000 Sector Size: $10000
Formating efs, wait....
Do not disconect phone untill done!.
Format OK.
For some phones need to long press Power button at first start.
Total Time: 00:00:19
Done.

[fokal2008]

UNLOCK NEXTTEL N8502 DONE BY NCKBOX

 Selected connection metod: META Mode
 Exe version: NCKBox AndroidMTK 1.8.7.8
 Selected model: MT6582
 Action: Unlock
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [101]Detected: MediaTek PreLoader USB VCOM Port (COM101) 
 \\?\usb#vid_0e8d&pid_2000#5&1544b92d&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Detected : MediaTek PreLoader USB VCOM Port (COM101)
 Boot mode: Preloader
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 Please restart exe, if error persist check if exe opened in ADMIN MODE.
 Boot Fail.!!!.
 All done.
 [197]META Port Detected: MediaTek DA USB VCOM (Android) (COM197) 
 USB\VID_0E8D&PID_2007\5&1544B92D&0&7 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : MT6582,S01
 [AP]APP_VER: ALPS.L0.MP2.V1_CKT6582.W.L_P38
 [META]BaseBand CPU : MT6582, E01
 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V1.P1
 [META]HW_VER : CKT6582_W_L_HSPA_HW
 Phone imei[1] : 356092022785502
 Phone imei[2] : 356092022888249
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok. 
 All done.

[ssony]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.6
Selected model: MT6735M
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM13)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : Lenovo DA USB VCOM (Android) (COM12)
OTP IMEI: 352185074718282
MODEL FROM PROINFO: V795-2AVDGB2
SECRO FROM PROINFO: X4C9FC10BP00
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:2) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

[distriaccel]

PHONE: Alcatel One Touch POP 2
Exe Version: NckDongle Qualcomm Module 0.3
Port: ALCATEL HS-USB Diagnostics 903A (COM35)
Build id: MPSS.JO.1.0.c6-00004-M8909EAAAANVZM-1.24186.1
Compile Date: Dec 1 2015
Compile time: 04:32:52
Release date: Jul 09 2015
Release time: 22:00:00
IMEI: 358204063666552
IMEI: 358204063666552
Unlock ok
Done.

[zvrrr]

Phone must be on, USB debugging must be enabled.
If Phone ask for SU, allow.
Found Device, reading info..
Brand: Huawei
Model: HUAWEI Y530-U00
Build ID: HuaweiY530-U00
Platform ID: msm8610
OS version: 4.3
Build version: Y530-U00V100R001C900B515
SU binary present.
Starting unlock, wait...
Using metod 1.
Reading simlock info, wait....
SIMLOCK[0]: Locked
SIMLOCK[1]: Unlocked
SIMLOCK[2]: Unlocked
Unlocking phone....
Write simlock succes.


Restarting phone, wait.....
If phone not restarted, please restart manually .
All done.

[swapan]

Gionee P3 MT6582 S**y Virus Removed Done By Flash

[hugmax]

done selecting MT6580

[ibrajinja]

Exe version: NCKBox AndroidMTK 1.8.7.7
Selected model: MT6571_EMMC
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM450)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Hynix] H9DA4VH2GJMMCR_4EM
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 128 BMT Blocks 80
Preloader SEC version: 2
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: PROTECT_S Begin: 0x800000 Len: 0x300000
[5]Part: SECCFG Begin: 0xb00000 Len: 0x40000
[6]Part: UBOOT Begin: 0xb40000 Len: 0x80000
[7]Part: BOOTIMG Begin: 0xbc0000 Len: 0x600000
[8]Part: RECOVERY Begin: 0x11c0000 Len: 0x600000
[9]Part: SEC_RO Begin: 0x17c0000 Len: 0x40000
[10]Part: MISC Begin: 0x1800000 Len: 0xc0000
[11]Part: LOGO Begin: 0x18c0000 Len: 0x100000
[12]Part: EXPDB Begin: 0x19c0000 Len: 0x200000
[13]Part: FAT Begin: 0x1bc0000 Len: 0x1400000
[14]Part: ANDROID Begin: 0x2fc0000 Len: 0x12000000
[15]Part: CACHE Begin: 0x14fc0000 Len: 0x700000
[16]Part: USRDATA Begin: 0x156c0000 Len: 0x9ec0000
[17]Part: BMTPOOL Begin: 0xffff0028 Len: 0x0
Offset: 0x1f400000 Count: 18
Dumping data, wait.
Value found, procesing[010c][001c0000]
Resetting phone.
FORMAT NAND FLASH : BEGIN: 0x156c0000 - LEN: 0x9ec0000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.

[alingsm2000]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.5
Selected model: MT6580
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM69)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM180)
OTP IMEI: 356774********
MODEL FROM PROINFO: V300-2AVDGB2
SECRO FROM PROINFO: L3DRFC41BS00
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.