Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[Xaker2012]

GSmart Essence 4 Firmware update

Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.7.9
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM711)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM713)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

[mmtheo]

[danisajee]

 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM26)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6580_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142 
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 150100464A3235 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM33)
 OTP IMEI: 358356081259438
 MODEL FROM PROINFO: V300-2BVDAU1
 SECRO FROM PROINFO: X3DRFAI0BS00
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:97) Code : 98936188 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Locked (remain:99) Code : 98936188 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 [0]Unlock finished.
 [1]Unlock finished.
 CHK updated ok.
 Wait untill phone will start charging.
 All done.

[razib143]

USB Connection selected.
EXE VERSION: NCKBox MTK Tool 4.0
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM186
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 35811608774AAA8
IMEI[2]: 35811608774AAA6
Start read, wait....
Dual sim detected!

Block1[N]: Locked (remain:5) Code : 12345678
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
SIM 2
Block1[N]: Locked (remain:5) Code : 12345678
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
Unlock file done
Dual sim detected!

Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

[schwantz]

Problem found, drivers

2017-07-27 13:12:19.657 Autodetect COM port and phone type start!
2017-07-27 13:12:20.287 Found COM port: COM30
2017-07-27 13:12:20.287 Found phone type: Huawei Android phone (HiSilicon CPU)
2017-07-27 13:12:20.292 Open COM port COM30 (Android Adapter PCUI (COM30))...
2017-07-27 13:12:20.417 Start read phone info!
2017-07-27 13:12:20.432 Connecting to server...
2017-07-27 13:12:20.817 Connected!
2017-07-27 13:12:31.593 CP State: ready
2017-07-27 13:12:31.598 Read phone basic info...
2017-07-27 13:12:33.093 Read phone secure info...
2017-07-27 13:12:43.168 Read phone info done!

IMEI: 867811026XXXXXX
SUB_IMEI: 867811026XXXXXX
IMEISV: 96
Firmware ver.: ALE-B896
SN: QLF7N15922003652
PCB SN: 7N3GJB159T009765
WiFi MAC: A0:8D:16:29:347
BlueTooth MAC: A0:8D:16:29:3C:B7
Vendor: vodafone
Country: pt
FASTBOOTailyBuild_201703022016_FASTBOOT
BOOTailyBuild_201703022016_BOOT
RECOVERYunknow)
SYSTEM:ALE-L21C02B896_SYSTEM
MAINVER:ALE-B896
DATAVERunknow)
APTIME:Thu Mar 2 20:22:45 CST 2017
CUSTTIME:Thu Mar 2 20:43:08 CST 2017
RAM: 2G
eMMC: 16G

IMEI 1 Sim Lock status:
NET: locked, unlock retry counts: 10
NETSUB: unlocked
SP: unlocked

2017-07-27 13:12:54.005 Autodetect COM port and phone type start!
2017-07-27 13:12:54.605 Found COM port: COM30
2017-07-27 13:12:54.610 Found phone type: Huawei Android phone (HiSilicon CPU)
2017-07-27 13:12:54.705 Connecting to server...
2017-07-27 13:12:55.030 Connected!
2017-07-27 13:12:55.045 Open COM port COM30 (Android Adapter PCUI (COM30))...
2017-07-27 13:13:09.656 CP State: ready
2017-07-27 13:13:09.661 Read phone basic info...
2017-07-27 13:13:10.881 Read phone secure info...
2017-07-27 13:13:20.926 Unlocking start
2017-07-27 13:13:20.931 Phone secure identify start
2017-07-27 13:13:23.492 Phone secure identify success!
2017-07-27 13:13:23.497 Read from server...
2017-07-27 13:13:24.612 Read from server success!
2017-07-27 13:13:28.497 Unlock done!

[luzer]

GoMobile GO963 ...

ACTION: Read Info.
Detecting phone, wait...
Detected: SPRD U2S Diag (COM162)
Port Opened OK.
Platform Version: MOCORTM_14A_W14.41_P15.21_Debug
Project Version: sc7715_modem
BASE Version: TM_BASE_13C_W14.41_MP_W15.21
HW Version: sc7715_sc7715_modem
05-21-2015 16:23:48
IMEI 1: 35387307-------
IMEI 2: 35275101-------
BT: 6E74500867E8
WIFI: 6E74500867F2

[USER]Simlock Status: LOCKED[17] Simlock Counter:[5/5]
[2]Simlock Type: 0 0
Sim 1 Unlock Code: 17206012
Sim 2 Unlock Code: 27504194
Warning, this is factory key, some opperators can modify factory key.
Done.

EXE: NckDongle Spreadtrum Module 0.4
SELECTED: SC7715EA_EMMC 4.x
ACTION: Backup NVRAM
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM163)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
BOOT1 SIZE: 2 MB [0x200000]
BOOT2 SIZE: 2 MB [0x200000]
USER SIZE: 3.68 GB [0xEBC00000]
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: GO963
Hardware: SP7715EA_V1.0.0
Platform: scx15
Board: w115_uct_212
Build Id: MocorDroid
Model: GO963
Android Release: 4.4.2
Android Version: MocorDroid test-keys
Making nvram backup..
Reading: prodnv
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Waiting for more data: 0
Reading: wfixnv1
Reading: wcnfixnv1
Backup saved: C:\-\NckDongle\backup\spd_nvram_backup\GO963_MocorDroi d test-keys_w115_uct_212_nvram_backup_1.bin
Total Time: 00:00:41
Done.

EXE: NckDongle Spreadtrum Module 0.4
SELECTED: SC7715EA_EMMC 4.x
ACTION: Unlock Phone
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM163)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
BOOT1 SIZE: 2 MB [0x200000]
BOOT2 SIZE: 2 MB [0x200000]
USER SIZE: 3.68 GB [0xEBC00000]
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: GO963
Hardware: SP7715EA_V1.0.0
Platform: scx15
Board: w115_uct_212
Build Id: MocorDroid
Model: GO963
Android Release: 4.4.2
Android Version: MocorDroid test-keys
IMEI 1: 35387307-------
IMEI 2: 35275101-------

SIMLOCK CUSTOMISE DATA
Simlock Status: LOCKED[18] Simlock Counter Max:[5]
Locks NCK:[25]
Ex Locks[1:0:0:0]
SIMLOCK CUSTOMISE DATA END

SIMLOCK USER DATA
Simlock Status: LOCKED[17] Simlock Counter:[0]
Ex Locks: 0
SIMLOCK USER DATA END
Simlock Type: 2
Start write unlock, wait...
Total Time: 00:00:15
Done.

Haier L54 ...

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.7.8
Selected model: MT6735M
Action: Unlock
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[178]Detected: PreLoader USB VCOM Port (COM178)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: Gadget CDC VCOM Driver (COM216)
USB\VID_0E8D&PID_2007\5&34B1332A&0&3
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6735m,S01
[AP]APP_VER: alps-mp-m0.mp1-V2.39.1_rlk6735m.65u.c.m0
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V79.P5
[META]HW_VER : RLK6753_65T_C_M0_HW
Phone imei[1] : 86205403-------
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
All done.

[coolwaindo]

oppo F1601 IME REPAIR done by nck box



?\usb#vid_0e8d&pid_0003#6&1ba46697&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[29]META Port Detected: Android Gadget VCOM Driver (COM29)
USB\VID_22D9&PID_0006\6&1BA46697&0&8
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6750,S01
[AP]APP_VER: A1601EX_11_A.28_170210
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6750
[META]SW_VER : MOLY.LR11.W1539.MD.MP.V20.3.P30
[META]HW_VER : OPPO6755_66_D57_L_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 35289********
Phone imei[1] : 352894060276*****
Clean Boot flag ok.
All done.

[razib143]

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.9
Selected model: MT6580
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM81)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM209)
OTP IMEI: 3567740730AAAA3
MODEL FROM PROINFO: V300-2AVDGB2-R
SECRO FROM PROINFO: L3DRFC41BS00
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:9) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 40927593
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

[razib143]

Exe version: NCKBox AndroidMTK 1.8.7.9
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM81)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0x1cd000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1cdc00000 [7.215 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

[luzer]

Huawei Ascend Y520-U03 direct unlock ...

Selected phone: Ascend Y520-U03
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(8) : MediaTek PreLoader USB VCOM Port (COM8)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[29] Android Gadget VCOM Driver (COM29)
USB\VID_0BB4&PID_0005&MI_02\6&395386BB&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.F2.P6
HW_VER : CKT72_WE_72_KK_HSPA_HW
Phone imei[1] : 86527802-------
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.

[onz]

[razib143]

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.9
Selected model: MT6735M
Action: Unlock
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
In OPPO need to keep VOL+ button untill inserting USB cable.
[81]Detected: MediaTek PreLoader USB VCOM (Android) (COM81)
\\?\usb#vid_0e8d&pid_2000#6&310cd63b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[219]META Port Detected: MediaTek USB VCOM (Android) (COM219)
USB\VID_0E8D&PID_2006&MI_02\7&C905170&0&0002
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-m0.mp1-V2.55.6_jhz6737m.35.b.m0_P84
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V81.6.P44
[META]HW_VER : JHZ6737T_65_B_M0_HW
Phone imei[1] : 3544920803AAA77
Phone imei[2] : 000000000000000
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

[zvrrr]

Flash files count is :15
Action : Firmware update.
Selected Model: HTC: HTC 310
Exe version: NCKDongle AndroidMTK 2.5.7.8
Scenario: [1]Full Flash
Parsing firmware, wait.
[23]Rom Count.
Connecting phone.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM314)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6582_S00
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164040503A12D37913F
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Dumping preloader.
Preloader backup already exist, skip saving.
Format UserData.
FORMAT EMMC FLASH : BEGIN: 0x55800000 - LEN: 0xc800000
FORMAT EMMC FLASH : BEGIN: 0x62000000 - LEN: 0x86700000
Start Flashing.
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
EBR2 checksum is executing ...
BLINKFEED checksum is executing ...
FLEX checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone start charging.
All done.


https://prnt.sc/g3r6sl

[Valdis1977]

Huawei Cun-L21 Y5II FRP successfully removed!
Exe version: NCKDongle AndroidMTK 2.5.7.6
Selected model: Ascend Y5 II[CUN-L21]
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

[gunit1]

Itel A12 frp done !

EXE: NckDongle Spreadtrum Module 0.5
SELECTED: SC7720EA_EMMC  5.x
ACTION: Reset FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: Itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb_A12
Build Id: MRA58K
Model: itel A12
Android Release: 6.0
Android Version: A12-W507A-6.0-OP-EG-V022-20170510
IMEI 1: 357697080900063
IMEI 2: 357697080900071
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Removing frp, wait...
Format OK.
Total Time: 00:00:22
Done