Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 254 - GSM-Forum

helpinterchange · 09-01-2015, 15:01

Digicel DL750 OT-4037A Unlock OK

Using NCK Dongle Android MTK, in Flash Mode

Code:

Selected connection metod: FLASH Mode
 Exe version: NCKDongle AndroidMTK 2.5.5.2
 Selected phone: OT-4037A
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM12)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6572_S00
 EMMC: (29Gb+8192Mb) SAMSUNG 0x4b3558564d42 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004B3558564D4201C543CE32323D
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 Detected : MediaTek DA USB VCOM (Android) (COM93)
 MODEL FROM PROINFO: 4037A-2HC9JM3
 SECRO FROM PROINFO: X9H0OP00AN10
 IMEI marker was found in nvram
 IMEI[1] from NVRAM: 45f5090d0e1e56a
 If this phone have OTP IMEI, this is normal.
 IMEI[1] from NVRAM: 45f5090d0e1e56a
 If this phone have OTP IMEI, this is normal.
 Reading security, wait...

 IMEI[1] : 01410400xxxxxxxxx
 SIM [1]
 Block1(N)  : Locked (remain:8) Code : 09097841 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C)  : Unlocked

BR

rehmani · 09-02-2015, 08:04

Code:

Module Ver.    : 3.1
Com Port    : COM42 : LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM) (COM42)
Baud Rate    : 38400 - Auto
Device    : LG RD3550
Operation    : Unlock
Port opened.
Reading Information...
Compile    : Jul 16 2010 12:35:38
Release    : Jul 16 2010 23:55:55
Hw Ver.    : RD355F02
ESN    : 8055xxxx
MEID    : A00000286xxxxx
Model    : RD3550
Software    : F02
Preparing phone...
Setting Download Mode...
Sending Bootloader...
Initializing Bootloader, Please wait...
Bootloader Running OK.
Erasing Security Regions...
Patching Security Regions...
Resetting phone...
Operation finished.
Port closed.
Elapsed Time: 00:36
Log saved as \!Log\LOG_15_09_02_12_32_44.log

rehmani · 09-02-2015, 08:46

Code:

Module Ver.    : 3.1
Com Port    : COM42 : LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM) (COM42)
Baud Rate    : 38400 - Auto
Device    : LG RD3540
Operation    : Unlock
Port opened.
Reading Information...
Compile    : Jul 23 2009 18:43:14
Release    : Jul 23 2009 23:00:00
Hw Ver.    : RD354F03
ESN    : 80CDxxxx
MEID    : A0000018Cxxxxx
Model    : RD3540
Software    : F03
Preparing phone...
Setting Download Mode...
Sending Bootloader...
Initializing Bootloader, Please wait...
Bootloader Running OK.
Erasing Security Regions...
Patching Security Regions...
Resetting phone...
Operation finished.
Port closed.
Elapsed Time: 00:27
Log saved as \!Log\LOG_15_09_02_13_12_19.log

rehmani · 09-02-2015, 10:36

Code:

Module Ver.    : 3.1
Com Port    : COM31 : ZTE CDMA Handset Diagnostics Interface (COM31)
Baud Rate    : 921600
Device    : S165
Operation    : Write MEID
Port opened.
Compile    : Apr 10 2012 15:17:30
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.S1
ESN    : 00000000
MEID    : 00000000000000
MemUnlock    : Success.
Build    : V.MTS.S165.B04
Detected    : S165
User Code    : 0000
Writing MEID A1000003xxxxx
Write success.
New ESN    : 804Dxxxx
New MEID    : A1000003xxxxxx
Operation finished.
Port closed.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_02_15_03_10.log

zvrrr · 09-02-2015, 11:28

Start Detect phone.
Press Vol+ and Lock buttons, and insert usb cable.
Phone must be without battery.
Detected : SAMSUNG Mobile USB DFU2 Device
Phone Detected ok.
Sending loader , wait.
Restarting phone.
Phone Detected ok.
Loader version : 7.4.4
Dumping eeprom file, wait.

Code1 Found: 77094340
- Firmware : C3300KXXJK2
- Imei : 356560040023601
- Master Unfreeze: 89315440

Code1 Found: 77094340
Total Time: 00:01:32
--------------------------
Log saved to:
logs\GT-C3300K_unlock__1.txt

ssony · 09-02-2015, 16:08

http://

BR
ssony

Punto-Móvil · 09-02-2015, 21:19

Selected connection metod: Adb Connection
Exe version: NCKDongle AndroidMTK 2.5.5.4
Selected phone: Note 3 Clone(MT6572)
Action : IMEI REPAIR.
IMEI for write : 358021058400551
Repair IMEI Start.
Phone lcd must be on and unlocked.
If ask for SU acces, accept it.
Device have root
---NVRAM IMEI----

PHONE IMEI 1 : 111111111111111

PHONE IMEI 2 :

---------

WRITING IMEI[1] :358021058400551

---------

Writed OK.

GsmKotla · 09-03-2015, 06:55

Flash files count is :11
Action : Firmware update.
Selected Huawei: Ascend Y600-U20
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6572_S00
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM55)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.

rehmani · 09-03-2015, 07:48

Code:

Module Ver.    : 3.1
Com Port    : COM42 : LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM) (COM42)
Baud Rate    : 38400 - Auto
Device    : LG RD3540
Operation    : Unlock
Port opened.
Reading Information...
Compile    : Aug 18 2009 10:59:01
Release    : Aug 18 2009 23:00:00
Hw Ver.    : RD354F04
ESN    : 8068xxxx
MEID    : A10000471xxxxx
Model    : RD3540
Software    : F04
Preparing phone...
Setting Download Mode...
Sending Bootloader...
Initializing Bootloader, Please wait...
Bootloader Running OK.
Erasing Security Regions...
Patching Security Regions...
Resetting phone...
Operation finished.
Port closed.
Elapsed Time: 00:27
Log saved as \!Log\LOG_15_09_03_12_09_35.log

.::TEJARAM::. · 09-03-2015, 09:19

Code:

Com Port    : COM78 : LGE Mobile USB Serial Port (COM78)
Baud Rate    : 38400 - Auto
Device    : LG RD3540
Operation    : Unlock
Port opened.
Reading Information...
Compile    : Aug 18 2009 10:59:01
Release    : Aug 18 2009 23:00:00
Hw Ver.    : RD354F04
ESN    : 807C776B
MEID    : A10000472FAF58
Model    : RD3540
Software    : F04
Preparing phone...
Setting Download Mode...
Sending Bootloader...
Initializing Bootloader, Please wait...
Bootloader Running OK.
Erasing Security Regions...
Patching Security Regions...
Resetting phone...
Operation finished.
Port closed.
Elapsed Time: 00:28
Log saved as \!Log\LOG_15_09_03_13_43_41.log

far_k30 · 09-03-2015, 12:31

Alcatel 4037T. - [Click to open]

Big thanks NCK team.

far_k30 · 09-03-2015, 12:53

And please check Server have BUG. 1 imei sent the request about 2-3 to get the code .. It was a night in our time ... and it was loaded?

UzUnlocker · 09-03-2015, 13:12

Samsung S5310 unlock done

Quote:

Model Selected : GT-S5310
If Phone ask sor SU acces, Allow it.
LCD must be ON and unlocked.
If phone ask for auth please confirm.
MODEL : GT-S5310
BOARD ID : rhea
PLATFORM ID : rhea
OS VERSION : 4.1.2
BUILD ID : JZO54K
BUILD DATE : Fri May 24 17:20:44 KST 2013
BUILD VERSION : JZO54K.S5310XXAME5
SOFTWARE VERSION : S5310XXAME5
Phone Subscriber Info:
Phone Type = GSM
Device ID = 357520051284673

(GSM)RIL VERSION : BRCM android bcm-ril-090728
(GSM)BASEBAND : S5310XXAME1
(RIL)SERIAL NUMBER : R21D675166W
(RIL)SW VERSION : S5310XXAME1
Checking SU: True
Checking Root access: True
Backup created:C:\Users\Бехруз\Documents\nck_samsung\3575 2005128467_GT-S5310\mmcblk0p18_1.bin
Unlock Done, Restarting Phone!
Total Time: 00:00:08
--------------------------

Hifzul Amin · 09-03-2015, 13:27

Zte S188 Unlock Done

Module Ver. : 3.1
Com Port : COM37 : ZTE CDMA Handset Diagnostics Interface (COM37)
Baud Rate : 921600
Device : ZTE S188
Operation : SP UNLOCK
Port opened.
Compile : Aug 22 2014 16:44:20
Release : Apr 24 2009 24:00:00
Hw Ver. : RIC_S188
ESN : 8097XXXX
MEID : A00000XXXXXXXX
MemUnlock : Success
Build : RIC_S188_CAM_RBTL21FV1.1
Detected : S188
User Code : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_03_17_53_53.log

rehmani · 09-03-2015, 13:54

Code:

Module Ver.    : 3.1
Com Port    : COM31 : ZTE CDMA Handset Diagnostics Interface (COM31)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : SP UNLOCK
Port opened.
Compile    : Nov 13 2014 15:58:49
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 80DExxxx
MEID    : A000004Exxxxx
MemUnlock    : Success
Build    : RIC_S194_CAM_RBTL21FV1.0
Detected    : S194
User Code    : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_03_18_18_58.log

Code:

Module Ver.    : 3.1
Com Port    : COM31 : ZTE CDMA Handset Diagnostics Interface (COM31)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : SP UNLOCK
Port opened.
Compile    : Nov 13 2014 15:58:49
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 80E11xxx
MEID    : A000004Exxxxx
MemUnlock    : Success
Build    : RIC_S194_CAM_RBTL21FV1.0
Detected    : S194
User Code    : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_03_18_21_41.log

Code:

Module Ver.    : 3.1
Com Port    : COM31 : ZTE CDMA Handset Diagnostics Interface (COM31)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : SP UNLOCK
Port opened.
Compile    : Nov 13 2014 15:58:49
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 8008Bxxx
MEID    : A000004E4Bxxxx
MemUnlock    : Success
Build    : RIC_S194_CAM_RBTL21FV1.0
Detected    : S194
User Code    : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_03_18_22_46.log

Code:

Module Ver.    : 3.1
Com Port    : COM31 : ZTE CDMA Handset Diagnostics Interface (COM31)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : SP UNLOCK
Port opened.
Compile    : Nov 13 2014 15:58:49
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 80D5Dxxx
MEID    : A000004E4Bxxxx
MemUnlock    : Success
Build    : RIC_S194_CAM_RBTL21FV1.0
Detected    : S194
User Code    : 0000
Setting Offlie Mode...
Executing EFS Based Unlock Method...
Resetting Phone...
Port closed.
Operation finished.
Elapsed Time: 00:01
Log saved as \!Log\LOG_15_09_03_18_23_38.log

09-02-2015, 11:28	#3800 (permalink)
zvrrr Freak Poster Join Date: Aug 2013 Posts: 409 Member: 1995502 Status: Offline Thanks Meter: 139	C3300K unlock (read codes) Start Detect phone. Press Vol+ and Lock buttons, and insert usb cable. Phone must be without battery. Detected : SAMSUNG Mobile USB DFU2 Device Phone Detected ok. Sending loader , wait. Restarting phone. Phone Detected ok. Loader version : 7.4.4 Dumping eeprom file, wait. Code1 Found: 77094340 - Firmware : C3300KXXJK2 - Imei : 356560040023601 - Master Unfreeze: 89315440 Code1 Found: 77094340 Total Time: 00:01:32 -------------------------- Log saved to: logs\GT-C3300K_unlock__1.txt

09-02-2015, 16:08	#3801 (permalink)
ssony No Life Poster Join Date: Mar 2012 Location: punjab Posts: 674 Member: 1732025 Status: Offline Sonork: 100.1615024 Thanks Meter: 329	Alcatel 5020X Unlock done http:// BR ssony

09-02-2015, 21:19	#3802 (permalink)
Punto-Móvil No Life Poster Join Date: Oct 2009 Location: GRAN ALACANT SPAIN Posts: 1,054 Member: 1147852 Status: Offline Thanks Meter: 587	Note 3 clone imei repair Selected connection metod: Adb Connection Exe version: NCKDongle AndroidMTK 2.5.5.4 Selected phone: Note 3 Clone(MT6572) Action : IMEI REPAIR. IMEI for write : 358021058400551 Repair IMEI Start. Phone lcd must be on and unlocked. If ask for SU acces, accept it. Device have root ---NVRAM IMEI---- PHONE IMEI 1 : 111111111111111 PHONE IMEI 2 : --------- WRITING IMEI[1] :358021058400551 --------- Writed OK.

09-03-2015, 06:55	#3803 (permalink)
GsmKotla No Life Poster Join Date: Sep 2013 Location: Kotla Arab Ali Khan(PAK) Posts: 635 Member: 2016954 Status: Offline Thanks Meter: 345	Y600-U20 Flash don Flash files count is :11 Action : Firmware update. Selected Huawei: Ascend Y600-U20 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM24) Phone detected...Please wait Sending DA agent, please wait... BBCHIP MT6572_S00 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404 EMMC FW VERSION: 05:00:00:00:00:00:00:00 BOOT STYLE : EMMC BOOT Detecting high speed port, wait...... If driver not installed, install high speed port driver. Detected : DA USB VCOM Port (COM55) Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Starting flash. Download firmware to flash now... MBR checksum is executing ... EBR1 checksum is executing ... UBOOT checksum is executing ... BOOTIMG checksum is executing ... RECOVERY checksum is executing ... SEC_RO checksum is executing ... LOGO checksum is executing ... ANDROID checksum is executing ... CACHE checksum is executing ... USRDATA checksum is executing ... Wait untill phone will start charging. All done.

09-03-2015, 12:31	#3806 (permalink)
far_k30 Freak Poster Join Date: Jul 2013 Location: Uzbekistan/Samarkand)) Posts: 257 Member: 1981875 Status: Offline Thanks Meter: 63	Alcatel 4037T 795pcs unlocked done. Alcatel 4037T. - [Click to open] Alcatel 4037T 795pcs unlocked done. Big thanks NCK team.

09-03-2015, 12:53	#3807 (permalink)
far_k30 Freak Poster Join Date: Jul 2013 Location: Uzbekistan/Samarkand)) Posts: 257 Member: 1981875 Status: Offline Thanks Meter: 63	And please check Server have BUG. 1 imei sent the request about 2-3 to get the code .. It was a night in our time ... and it was loaded?

09-03-2015, 13:27	#3809 (permalink)
Hifzul Amin Freak Poster Join Date: Mar 2014 Location: Heart Posts: 327 Member: 2144988 Status: Offline Sonork: 100.1655364(Offline) Thanks Meter: 217	Zte S188 Unlock Done Module Ver. : 3.1 Com Port : COM37 : ZTE CDMA Handset Diagnostics Interface (COM37) Baud Rate : 921600 Device : ZTE S188 Operation : SP UNLOCK Port opened. Compile : Aug 22 2014 16:44:20 Release : Apr 24 2009 24:00:00 Hw Ver. : RIC_S188 ESN : 8097XXXX MEID : A00000XXXXXXXX MemUnlock : Success Build : RIC_S188_CAM_RBTL21FV1.1 Detected : S188 User Code : 0000 Setting Offlie Mode... Executing EFS Based Unlock Method... Resetting Phone... Port closed. Operation finished. Elapsed Time: 00:01 Log saved as \!Log\LOG_15_09_03_17_53_53.log