Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[sasfido]

itel it 1513 frp done.

EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Reset Userdata and Remove FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Fota platform: Sprd7731_6.0
Fota version: IT1513-C162A-6.0-20161019
Board: itel_it1513
Build Id: MRA58K
Model: itel it1513
Android Release: 6.0
Android Version: MRA58K release-keys
Security patch: 2016-09-06
This phone have frp partition.
[misc]Erasing FRP, wait...
[misc]Formating userdata, wait...
Format OK.
Wait untill phone will restart.
Total Time: 00:00:12
Done.

[sasfido]

itel it 1513 frp done.

EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC7731C_EMMC
ACTION: Reset Userdata and Remove FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Fota platform: Sprd7731_6.0
Fota version: IT1513-C162A-6.0-20161019
Board: itel_it1513
Build Id: MRA58K
Model: itel it1513
Android Release: 6.0
Android Version: MRA58K release-keys
Security patch: 2016-09-06
This phone have frp partition.
[misc]Erasing FRP, wait...
[misc]Formating userdata, wait...
Format OK.
Wait untill phone will restart.
Total Time: 00:00:12
Done.

[zaya21]

Operation: Dump Firmware
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM14) detected.
Hello received.
HW ID: 00000400E1B00600 MSM8940
PK HASH: FDAC87167C2B5ABD71D9D9D948B180B8DAFE3F0FC6AF795BD6 7E17ADC7233D58
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8937
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29.12 GB Partitions count: 47
[02D11FDF]Userdata Size: 22.54 GB
Manufacturer: ZTE
Cpu: arm64-v8a
Build Id: NMF26V
Model: Z982
Android Release: 7.1.1
Android Version: Z982_OMV1.0.0B03
Security patch: 2018-10-01
[0] [ PrimaryGPT ] Reading: gpt_main0.bin
[0] [ BackupGPT ] Reading: gpt_backup0.bin
[0] [ sbl1 ] Reading: sbl1.mbn
[0] [ rpm ] Reading: rpm.mbn
\par [0] [ tz ] Reading: tz.mbn
[0] [ devcfg ] Reading: devcfg.mbn
[0] [ fsg ] Reading: study.tar
[0] [ fingerid ] Reading: fingerid.bin
[0] [ dsp ] Reading: adspso.bin
[0] [ splash ] Reading: splash.img
[0] [ echarge ] Reading: echarge.img
[0] [ fastboot ] Reading: fastboot.bin
[0] [ fastinfo ] Reading: fastinfo.bin
[0] [ ztecfg ] Reading: ztecfg.bin
[0] [ aboot ] Reading: emmc_appsboot.mbn
[0] [ modem ] Reading: NON-HLOS.bin
[0] [ boot ]Reading: boot.img
[0] [ recovery ]Reading: recovery.img
[0] [ cmnlib ] Reading: cmnlib.mbn
[0] [ cmnlib64 ] Reading: cmnlib64.mbn
[0] [ keymaster ] Reading: keymaster.mbn
[0] [ sddump ] Reading: sddump.bin
[0] [ sec ] Reading: sec.dat
[0] [ mdtp ] Reading: mdtp.img
[0] [ misc ] Reading: misc.img
[0] [ logdump ] Reading: logdump.bin
[0] [ cache ]Reading: cache.img
[0] [ system ] Reading: system.img
[0] [ userdata ]Reading: userdata.img
Saved to: C:\\nckbox\\qualcomm_module\\qc_loaders\\qualcomm_ module\\qc_firmware\\ZTE_NMF26V_Z982_7_1_1\\
Restarting phone.....
*************************************

[sasfido]

FERO 8.1.0 sc7731e reset user data and frp remove done

Phone Storage: EMMC
EXE: NckDongle Spreadtrum Module 1.1
SELECTED: SC9832A_EMMC
ACTION: Reset Userdata and Remove FRP
Custom loader: itel_a14.loader
Start Detect phone...
Detected: SPRD U2S Diag (COM9)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Fero
Hardware: k121_v1.1.0
Board: A5003
Build Id: OPM2.171019.012
Build version: K121AG_8.1_FER_TZ_BR1_04
Model: A5003
Android Release: 8.1.0
Android Version: OPM2.171019.012 release-keys
Security patch: 2018-07-05
This phone have frp partition.
[misc]Erasing FRP, wait...
[misc]Formating userdata, wait...
Format OK.
Wait untill phone will restart.
Total Time: 00:00:16
Done.

[sajid01913]

Symphony V28 Read Pattern Done

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC7731G_EMMC 4.x
[0]ACTION: Read Pattern Lock
Start Detect phone...
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: SYMPHONY
Hardware: SP7731GEA_V1.0.0
Platform: sc8830
Board: sp7731gea_18045
Build Id: KOT49H
Model: V28
Android Release: 4.4.2
Android Version: V28_XXX_V6
1 2 3
4 5 6
7 8 9
Pattern: Pattern: 147596328
*************************************
HEX: 20C7BF3750CEEB8E1DD6C203D2C8FCBEFDB178F6
*************************************
Total Time: 00:00:13
Done.

[DUSKnenixs]

Exe version: NCKDongle AndroidMTK 2.6.0.0
Selected model: 0-By CPU MT6735M
[auto]Action: Reset FRP
Will be used loader: DA_SWSEC_ANDY4_1652.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

writing para!
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[reedson]

Unlock procedure started, waiting for phone.
Power off phone, keep BACK button and insert usb cable.
Keep holding back key untill next prompt.
Connecting to the server
Please wait....
Send S1 Loader
Loader is sent, please wait...
Read device info.
CXC : 1229-3641
IMEI : 01256000706299
EROM AID : 0001
LOADER AID : 0001
AID TAMP STATE : NOT_TAMPERED
SE X8 GROUP
- HOLD THE BACK KEY
IMEI : 01256000xxxxxx
- SE UNLOCK STARTED.
- WAITING USER ACTION
- WAITING PHONE
Version : 2.1-update1 OK.
Start comunication with phone...
- WAITING PHONE
- PHONE FOUND
Changes appilied
Check changes, wait..
Wait untill phone full power on.
- STATUS: - UNLOCKED!!
Wait untill phone full power on.

[isams44]

moto g xt1032

PHONE: Motorola qualcom
Exe Version: NckDongle Qualcomm Module 0.12.6
Port: Motorola QC Diag Port (COM840)
Build id: M8626A-AAAANAZM-1.0.20036
Compile Date: May 21 2014
Compile time: 19:44:30
Release date: Apr 22 2014
Release time: 15:00:00
IMEI: 355002054791320
Motorola unlock start..
IMEI: 355002054791320
Unlock ok
Done.

[luzer]

Lg k8 (k350f) frp ...

[model selected: K8
port: Lge mobile usb serial port (com204)
model: Lg-k350f
sw verion: Lgk350fat-00-v10i-sca-xxx-mar-08-2019+0
android verion: 6.0
imei: 357988073503851
product id: Vs04s170321003178
cpu: Mt6735
fw: Lgk350fat-00-v11i-global-sca-mar-08-2019+0
partitions count: 40
userdata reset start..
Userdata reset done.
Frp reset start..
Frp reset done.
Restarting phone.....
Done.

[GsmKotla]

Flash files count is :13
Action : Firmware update.
Selected Model: Qmobile: QMobile X35
Exe version: NCKBox AndroidMTK 2.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 3a:00:00:00:00:00:00:00
EMMC CID: 45010053454D303447 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec600000 [3.693 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM166)
F:\Q Mobile\Q-X\X 35\MT6572__QMobile__QMobile X35__QMobile__4.4.2__QMobileX35_MP_UNLOCK_19_03_20 15\preloader_backup_13_09_2019_09_56\preloader_zte nj72_we_72_m536_kk.bin
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.

[sasfido]

vodavone 300 flash done. it was stuck at round ball.

Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.1
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM11)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM12)
C:\Users\Admin\DOWNLO~1\MT6580~1.0_V\MT6580~1.0_V\ MT6580~1.0_V\preloader_backup_13_09_2019_12_21\pre loader_samg_vf.bin
Backup preloader saved in firmware directory.
[2]FORMAT - BEGIN: 0x1c80000 - LEN: 0x40000
[2]FORMAT - BEGIN: 0x50a0000 - LEN: 0x2000000
[2]FORMAT - BEGIN: 0x37000000 - LEN: 0x10000000
[2]FORMAT - BEGIN: 0x47000000 - LEN: 0xa1480000
Starting flash.
Send preloader...
Wait untill phone will start charging.
[0]All done.

[GsmKotla]

Exe version: NCKBox AndroidMTK 2.1
Selected model: WIKO Jerry 2
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 150100464531324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[taimur-ahmad]

Q MOBILE J2 FRP LOCK RESET DONE

Exe version: NCKDongle AndroidMTK 2.6.0.0
Selected model: Qmobile QMobile J2
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM45)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Checking data, wait...

writing para!
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

[technomak]

 Exe version: NCKDongle AndroidMTK 2.6.1
 Selected model: Alcatel  OT-5099Y
 Action: Unlock
 Scanning for presents meta ports...
 Phone must be off with battery inside. 
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [25]Detected: MediaTek USB Port (COM25) 
 \\?\usb#vid_0e8d&pid_0003#5&3b576742&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [83]META Port Detected: MediaTek USB VCOM (Android) (COM83) 
 USB\VID_0E8D&PID_2007\5&3B576742&0&2 
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6737t,S01
 [AP]APP_VER: alps-mp-o0.mp1
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V199.3
 [META]HW_VER : TCL_TB8735AP1_HW
 Phone imei[1] : 353937090592904
 Start direct unlock[SIM1]
 Direct unlock done
 Clean Boot flag ok. 
 [0]All done.

[GolfGSM]

Exe version: NCKDongle AndroidMTK 2.6.1
Selected model: Alcatel OT-5099Y
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[10]Detected: MediaTek USB Port (COM10)
\\?\usb#vid_0e8d&pid_0003#5&521a615&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[8]META Port Detected: MediaTek USB VCOM (Android) (COM8)
USB\VID_0E8D&PID_2007\5&521A615&0&5
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737t,S01
[AP]APP_VER: alps-mp-o0.mp1-V3.106_tb8735ap1_P2
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V228.3
[META]HW_VER : TCL_TB8735AP1_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 353937090666039
Simlock Info : Sim [1]
Block1[N] :Unlocked
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************
[0]All done.